Introduction
Production Information of John Deere, 830
The production information of the tractor (830) includes details about its manufacturing.
| Utility tractor |
| Built in Mannheim, Baden-Württemberg, Germany |
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, 830
This section sums up the dimension and tires information of the tractor.
| Rear tread | 53.5 to 73.2 inches [135 to 185 cm] |
|---|---|
| Wheelbase | 74.4 inches [188 cm] |
| Weight | 4740 lbs [2150 kg] |
| Height | 89 inches [226 cm] |
| Length | 131.5 inches [334 cm] |
| Front tread | 49.6 to 79.5 inches [125 to 201 cm] |
| Width | 65.9 inches [167 cm] |
| Ag front | 6.00-16 |
|---|---|
| Ag rear | 13.6/12-28 |
Engine Specifications of John Deere, 830
Get the specifications for the engine and if different options are available.
| John Deere |
| Liquid-cooled |
| Diesel |
| 3-cylinder |
| Starter volts | 12 |
|---|---|
| Starter | Electric |
| Air cleaner | Dry |
| Oil capacity | 6 qts [5.7 L] |
| Rated RPM | 2400 |
| Idle RPM | 650-2545 |
| Compression | 16.2:1 |
| Displacement | 164.4 ci [2.7 L] |
| Power (net) | 35 hp [26.1 kW] |
| Bore/Stroke | 4.02x4.33 inches [102 x 110 mm] |
| Torque RPM | 1300 |
| Coolant capacity | 11 qts [10.4 L] |
| Torque | 87 lb-ft [118.0 Nm] |
| Operating RPM | 1300-2400 |
Transmission Information of John Deere, 830Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four gears in two ranges, plus reverse range. |
| Type | Gear |
|---|---|
| Oil capacity | 31.7 qts [30.0 L] |
| Gears | 8 forward and 4 reverse |
| Clutch | Dry disc |
Mechanical Specs of John Deere, 830Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Wet disc brakes |
| Manual steering |
| Final drives | Planetary |
|---|---|
| Differential lock | Mechanical rear |
Power Information of John Deere, 830Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Engine RPM | 540@2100 |
| Clutch | Dry disc |
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of John Deere, 830
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Pump flow | 6.3 gpm [23.8 lpm] |
| Capacity | 7.9 gal [29.9 L] |
| Pressure | 2104 psi [145.1 bar] |
Three-Point Hitch of John Deere, 830
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Control | Position and draft control |
| Rear lift | 3417 lbs [1549 kg] |
Electrical System of John Deere, 830
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery AH | 55 |
| Battery volts | 12 |
| Charging system | Alternator |
| Charging amps | 28 |
Frequently asked questions
How much horsepower does the John Deere 830 have?
The John Deere 830 delivers 35 HP.
What years was the John Deere 830 produced?
The John Deere 830 was produced in 1974-1979.
What engine does the John Deere 830 have?
The John Deere 830 is powered by a Diesel, 3-cylinder engine.
What transmission does the John Deere 830 use?
The John Deere 830 uses a Gear transmission.
How much does the John Deere 830 weigh?
The John Deere 830 weighs 4740 lbs [2150 kg].
Is the John Deere 830 4WD?
The John Deere 830 is available in 2WD.