John Deere 4710 tractor

John Deere 4710

Power

46 hp

Production

2002-2004

Engine

4-cylinder

Transmission

PowrReverser

Weight

3450 lbs [1564 kg]

Drive

4WD

From the same series:

4610

Introduction

Production Information of John Deere, 4710

The production information of the tractor (4710) includes details about its manufacturing.

Compact Utility tractor
Built in Augusta, Georgia, USA
ManufacturerJohn Deere

Dimension and Tires Information of John Deere, 4710

This section sums up the dimension and tires information of the tractor.

Wheelbase71.5 inches [181 cm]
Shipping weight3450 lbs [1564 kg]
Length135 inches [342 cm]
Width62 inches*Minimum width. [157 cm]
22.5LL-16.1
Ag front6.00-16 (2WD)
Ag rear13.6-24
8.00-16 (4WD)
6.50-16 (2WD)
Lawn/turf front27x10.5-15
13.6-28
7.00-16 (4WD)
Industrial rear17.5L-24
Industrial front10.00-16.5 (4WD)
Lawn/turf rear44x18.00-20
27x12LL-15 (4WD)
16.9-24

Engine Specifications of John Deere, 4710

Get the specifications for the engine and if different options are available.

Liquid-cooled
4-cylinder
Coolant capacity6.8 qts [6.4 L]
Air cleanerDry with safety element
Compression18:1
Torque108 lb-ft [146.4 Nm]
Rated RPM2600
Displacement133 ci [2.2 L]
Oil capacity5.1 qts [4.8 L]
Power (gross)46.3 hp [34.5 kW]
Bore/Stroke3.456x3.543 inches [88 x 90 mm]
Starter power2.7 hp [2.0 kW]
Starter volts12
Torque RPM1700

Transmission Information of John Deere, 4710Y

Discover all variants of transmission available for this tractor model.

Transmission variants 1

The PowrReverser is operated with a range shift lever, gear shift lever, and reverser lever. The tractor must be stopped, and clutch used, to change ranges. Gear shifts may be made while in motion using the clutch. A clutchless power shift can be made between forward and reverse using the reverser lever.
TransmissionPowrReverser
Oil capacity38.8 qts [36.7 L]
TypePower shuttle
Gears12 forward and reverse

Transmission variants 2

The eHydro is operated via a three-position range shift lever plus forward and reverse pedals. The tractor must be stopped to change range.
TransmissionEHydro
Oil capacity36.8 qts [34.8 L]
TypeHydrostatic
GearsInfinite forward and reverse
12-speed power shuttle
Hydrostatic

Mechanical Specs of John Deere, 4710Y

This section summarizes all mechanical information such as the brake system and other specifications.

Four-wheel drive
Wet disc brakes
Power steering
Platform with two-post folding ROPS.
Final drivesPlanetary
Differential lockMechanical rear

Power Information of John Deere, 4710Y

Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.

Rear PTOIndependent
Mid PTOIndependent OptOptional
Engine RPM540@2600
ClutchWet disc
Mid PTO Type2100
Rear PTO Type540 (1.375)

Hydraulics Specifications of John Deere, 4710

Hydraulic system type, pressure, pump flow and valves.

Steering flow5.3 gpm [20.1 lpm]
TypeOpen center
Pump flow10.6 gpm [40.1 lpm]
Pressure2500 psi [172.4 bar]
Capacity9.7 gal [36.7 L]
Total flow15.9 gpm [60.2 lpm]
9.2 gal (hydrostatic) [34.8 L]

Three-Point Hitch of John Deere, 4710

Hitch category and rear/front lift capacity.

Rear TypeI
Rear lift2500 lbs [1134 kg]

Electrical System of John Deere, 4710

Battery voltage, charging system and ground.

GroundNegative
Battery volts12
Battery CCA690
Charging systemAlternator
Charging amps40

Frequently asked questions

How much horsepower does the John Deere 4710 have?

The John Deere 4710 delivers 46 HP.

What years was the John Deere 4710 produced?

The John Deere 4710 was produced in 2002-2004.

What engine does the John Deere 4710 have?

The John Deere 4710 is powered by a 4-cylinder engine.

What transmission does the John Deere 4710 use?

The John Deere 4710 uses a PowrReverser transmission.

How much does the John Deere 4710 weigh?

The John Deere 4710 weighs 3450 lbs [1564 kg].

Is the John Deere 4710 4WD?

The John Deere 4710 is available in 4WD.

Compare the John Deere 4710 with another model