Introduction
Production Information of John Deere, 5510
The production information of the tractor (5510) includes details about its manufacturing.
| Utility tractor |
| Distributor | John Deere |
|---|---|
| Manufacturer | Carraro |
Dimension and Tires Information of John Deere, 5510
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 85.8 inches [217 cm] |
|---|---|
| Weight | 7050 lbs [3197 kg] |
| Length | 132 inches [335 cm] |
| Height (cab) | 94.5 inches [240 cm] |
| 2WD Standard tires (ag) | Front: 7.50-16. Rear: 16.9R30 |
|---|---|
| 4WD Standard tires (ag) | Front: 11.2R24. Rear: 16.9R30 |
Engine Specifications of John Deere, 5510
Get the specifications for the engine and if different options are available.
| John Deere 4045TAT50 |
| Liquid-cooled |
| Turbocharged |
| 4-cylinder |
| Starter volts | 12 |
|---|---|
| Starter | Electric |
| Cab Coolant capacity | 13.7 qts [13.0 L] |
| Compression | 17.0:1 |
| Starter power | 4 hp [3.0 kW] |
| Idle RPM | 800-2510 |
| Operating RPM | 1500-2300 |
| Rated RPM | 2300 |
| Displacement | 274.6 ci [4.5 L] |
| Rated Power (net) | 80 hp [59.7 kW] |
| Bore/Stroke | 4.19x5.00 inches [106 x 127 mm] |
| Firing order | 1-3-4-2 |
| Oil capacity | 8.5 qts [8.0 L] |
| ROPS Coolant capacity | 12.6 qts [11.9 L] |
| Torque RPM | 1500 |
| Torque | 231.6 lb-ft [314.0 Nm] |
Transmission Information of John Deere, 5510Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four gears (1-4) in three ranges (A, B, C) with reverse lever. Gear shifts are synchronized, using the clutch. Tractor must be stopped, and clutch used, to shift range or direction. |
| Type | Partially synchronized |
|---|---|
| Gears | 12 forward and reverse |
Transmission variants 2
| Four gears (1-4) in three ranges (A, B, C) with reverse lever and Hi-Lo shift. Gear shifts are synchronized, using the clutch. Tractor must be stopped, and clutch used, to shift range, direction, or Hi-Lo. |
| Type | Partially synchronized |
|---|---|
| Gears | 24 forward and reverse |
Transmission variants 3
| Four gears (1-4) in three ranges (A, B, C) with reverse lever and push-button Electro-Hydraulic Hi-Lo. Gear shifts are synchronized, using the clutch. Tractor must be stopped, and clutch used, to shift range ordirection. |
| Type | Two-speed power shift |
|---|---|
| Gears | 24 forward and reverse |
| 12-speed partially synchronized |
| 24-speed partially synchronized |
| 24-speed two-speed power shift |
Mechanical Specs of John Deere, 5510Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Wet disc brakes |
| Cab standard. |
| Trailer brakes | Hydraulic OptOptional |
|---|---|
| Differential lock | Mechanical rear |
| Steering | Hydrostatic power |
Power Information of John Deere, 5510Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO Type | 540/540E |
|---|---|
| 1000@1962 | |
| 540E@1648 | |
| 540/1000 | |
| Engine RPM | 540@1938 |
Hydraulics Specifications of John Deere, 5510
Hydraulic system type, pressure, pump flow and valves.
| Steering flow | 6.5 gpm [24.6 lpm] |
|---|---|
| Type | Open center |
| Pump flow | 12.4 gpm [46.9 lpm] |
| 4WD 24-Speed Capacity | 11.4 gal [43.1 L] |
| 2WD Capacity | 9.5 gal [36.0 L] |
| 18.8 gpmOptOptional [71.2 lpm] | |
| 4WD 12-Speed Capacity | 10 gal [37.9 L] |
Three-Point Hitch of John Deere, 5510
Hitch category and rear/front lift capacity.
| Rear Type | II/I |
|---|---|
| Control | Position and draft control |
| Rear lift | 5395 lbs [2447 kg] |
Electrical System of John Deere, 5510
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Cab Charging amps | 65 |
| Charging system | Alternator |
| Battery AH | 100 |
| ROPS Charging amps | 40 |
Frequently asked questions
How much horsepower does the John Deere 5510 have?
The John Deere 5510 delivers 80 HP.
What years was the John Deere 5510 produced?
The John Deere 5510 was produced in 2000-2002.
What engine does the John Deere 5510 have?
The John Deere 5510 is powered by a 4-cylinder engine.
What transmission does the John Deere 5510 use?
The John Deere 5510 uses a Partially synchronized transmission.
How much does the John Deere 5510 weigh?
The John Deere 5510 weighs 7050 lbs [3197 kg].
Is the John Deere 5510 4WD?
The John Deere 5510 is available in 2WD/4WD.