John Deere 5515 tractor

John Deere 5515

Power

82 hp

Production

2003-2008

Engine

4-cylinder

Transmission

Partially synchronized

From the same series:

5415

Introduction

John Deere 5515 Utility Tractor

The John Deere 5515 is a utility tractor produced between 2003 and 2008. Manufactured by Agritalia in Italy, this model is designed for versatile agricultural applications, combining European engineering with John Deere's operational standards.

Engine and Performance

The tractor is powered by a 4-cylinder, liquid-cooled engine with a displacement of 4.5 liters. It delivers a rated gross power of 82 hp (61.1 kW) at 2300 engine RPM. The engine features a firing order of 1-3-4-2 and a compression ratio of 17.0:1, designed to balance fuel efficiency and consistent torque output, peaking at 314.0 Nm at 1500 RPM.

Transmission Systems

The 5515 offers three transmission configurations to suit various operational needs. The base model features a 12-speed partially synchronized transmission. Higher specifications include a 24-speed partially synchronized version with a mechanical high-low range, and a 24-forward/12-reverse two-speed power shift transmission. The power shift variant includes an electro-hydraulic clutch and a left-hand power shuttle lever for enhanced maneuverability during repetitive tasks.

Hydraulics and PTO

The hydraulic system utilizes an open-center design with a standard pump flow of 12.4 gpm (46.9 lpm) at 1900 psi, capable of being upgraded to 15.8 gpm (59.8 lpm). The rear three-point hitch is a Category 2/1 type with a lift capacity of 5,845 lbs (2651 kg). The independent rear PTO supports multiple operating speeds, including 540, 540E, and 1000 RPM, allowing for the efficient operation of a wide array of implements.

Mechanical and Dimensions

Steering is managed by a hydrostatic power system, ensuring precise control. Braking is provided by hydraulic wet disc brakes, with an optional hydraulic trailer braking system available. The physical dimensions vary by configuration, with an overall length of 139.76 inches (354 cm) and varying front axle clearances between 8.94 and 15.75 inches depending on the specific axle and tire setup.

Conclusion

The John Deere 5515 is a well-balanced utility tractor suitable for general farming and specialty operations. Its combination of multiple transmission choices, flexible PTO speeds, and robust hydraulic capacity makes it a reliable asset for operators requiring a mid-range tractor capable of handling diverse implement-heavy workloads.

Production Information of John Deere, 5515

  • Built in Italy
  • Utility tractor
DistributorJohn Deere
ManufacturerAgritalia

Dimension and Tires Information of John Deere, 5515

Length139.76 inches (5515F/V) [354 cm]
Length(optional)15.75 inches (4WD) [40 cm]
Length(optional)13.58 inches (5515F 2WD) [34 cm]
Clearance (front axle)8.94 inches (5515V) [22 cm]
Clearance (front axle)(optional)17.13 inches (2WD) [43 cm]
Clearance (front axle)(optional)10.83 inches (5515F 4WD) [27 cm]

Engine Specifications of John Deere, 5515

  • Liquid-cooled
  • 4-cylinder
StarterElectric
Exhaust valve clearance0.018 inches [0.457 mm]
Firing order1-3-4-2
Firing order(optional)13.7 qts (with cab) [13.0 L]
Rated Power (gross)82 hp [61.1 kW]
Starter volts12
Intake valve clearance0.014 inches [0.356 mm]
Rated RPM2300
Idle RPM825-2510
Compression17.0:1
Displacement276 ci [4.5 L]
Rated Power (net)80 hp [59.7 kW]
Oil capacity8.5 qts [8.0 L]
Bore/Stroke4.19x5.00 inches [106 x 127 mm]
Torque RPM1500
Starter power3.8 hp [2.8 kW]
Coolant capacity12.6 qts (ROPS) [11.9 L]
Torque231.6 lb-ft [314.0 Nm]
Operating RPM1200-2300

Transmission Information of John Deere, 5515

Transmission variants 1

  • Four gears (1-4) in three ranges (A, B, C) with mechanical shuttle. Gear shifts are synchronized.
TypePartially synchronized
Gears12 forward and reverse
ClutchDry disc

Transmission variants 2

  • Mechanical high-low added to base 12-speed transmission.
TypePartially synchronized
Gears24 forward and reverse
ClutchDry disc

Transmission variants 3

  • Four gears (1-4) in three ranges (A, B, C) and electronically-shifted high/low. Left-hand power shuttle lever and push-button high/low shift. Push-button electric declutch button on gear shift allows for gear changes without foot clutch.
TypeTwo-speed power shift
Gears24 forward and 12 reverse
ClutchHydraulic
  • 12-speed partially synchronized
  • 24-speed partially synchronized
  • 24-speed two-speed power shift

Mechanical Specs of John Deere, 5515

  • Hydraulic wet disc brakes
SteeringHydrostatic power
Trailer brakesHydraulic

Optional.

Power Information of John Deere, 5515

Rear PTOIndependent
Rear PTO(optional)540E@1648
Engine RPM540@1938
ClutchDry disc
Clutch(optional)1000@1962
Rear PTO Type540/540E/1000

Hydraulics Specifications of John Deere, 5515

TypeOpen center
Steering flow6.5 gpm [24.6 lpm]
Steering flow(optional)15.8 gpm (optional) [59.8 lpm]
Pressure1900 psi [131.0 bar]
Steering press.2700 psi [186.2 bar]
Pump flow12.4 gpm [46.9 lpm]

Three-Point Hitch of John Deere, 5515

Rear Type2/1
Rear lift (at ends)5,845 lbs [2651 kg]

Electrical System of John Deere, 5515

GroundNegative
Battery volts12
Battery volts(optional)65 (with cab)
Charging systemAlternator
Battery AH100
Charging amps40 (ROPS)

Where it sits

With 82 HP, the John Deere 5515 sits just above 5510 (80 HP) in John Deere's range. Its power puts it in the 54th percentile of 2000s models in our database (2822 machines).

Frequently asked questions

How much horsepower does the John Deere 5515 have?

The John Deere 5515 delivers 82 HP.

What years was the John Deere 5515 produced?

The John Deere 5515 was produced in 2003-2008.

What engine does the John Deere 5515 have?

The John Deere 5515 is powered by a 4-cylinder engine.

What transmission does the John Deere 5515 use?

The John Deere 5515 uses a Partially synchronized transmission.

Compare the John Deere 5515 with another model