Introduction
Production Information of John Deere, 5525
The production information of the tractor (5525) includes details about its manufacturing.
| Utility tractor |
| Built in Augusta, Georgia, USA |
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, 5525
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 85.7 inches [217 cm] |
|---|---|
| Clearance (drawbar) | 17.8 inches [45 cm] |
| 4WD Clearance (front axle) | 17.7 inches [44 cm] |
| Length | 151.5 inches [384 cm] |
| Flange rear axle | 57.3 inch length [1455 mm] |
| 2WD Clearance (front axle) | 18.8 inches [47 cm] |
| 2WD Standard tires (ag) | Front: 7.50-16. Rear: 420/90R30 |
|---|---|
| 4WD Standard tires (ag) | Front: 11.2-24. Rear: 420/90R30 |
Engine Specifications of John Deere, 5525
Get the specifications for the engine and if different options are available.
| Liquid-cooled |
| 4-cylinder |
| Coolant capacity | 12 qts [11.4 L] |
|---|---|
| Starter volts | 12 |
| Power (gross) | 91 hp [67.9 kW] |
| Rated RPM | 2400 |
| Compression | 17.6:1 |
| Displacement | 276 ci [4.5 L] |
| Oil capacity | 9 qts [8.5 L] |
| Emissions | Tier II |
| Air cleaner | Paper and felt elements |
| Bore/Stroke | 4.19x5.00 inches [106 x 127 mm] |
| Firing order | 1-3-4-2 |
| Operating RPM | 1600-2400 |
| Idle RPM | 825-2625 |
Transmission Information of John Deere, 5525Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Three gears (1-3) plus reverse in three ranges (A-C). Gears may be shifted on the move using the clutch. Tractor must be stopped, and clutch used, to shift ranges. |
| 122o↔-10oF [50o↔-23oC] | : Hy-Gard |
|---|---|
| Transmission | John Deere SyncShuttle |
| Oil capacity | 41.2 qts [39.0 L] |
| Clutch | Dry disc |
| Type | Partially synchronized |
| 86o↔-40oF [30o↔-40oC] | : Low-Viscosity Hy-Gard |
| Oil type | 122o↔-10oF [50o↔-23oC] : Hy-Gard 86o↔-40oF [30o↔-40oC] : Low-Viscosity Hy-Gard |
| Gears | 9 forward and 3 reverse |
Transmission variants 2
| Four gears (1-4) in three ranges (A-C) with reverser lever. Direction may be changed without using the clutch. Gear shifts are synchronized using the clutch. Tractor must be stopped to shift ranges. |
| 122o↔-10oF [50o↔-23oC] | : Hy-Gard |
|---|---|
| Transmission | John Deere PowrReverser |
| Oil capacity | 46 qts [43.5 L] |
| Clutch | Wet disc |
| Type | Power shuttle |
| 86o↔-40oF [30o↔-40oC] | : Low-Viscosity Hy-Gard |
| Oil type | 122o↔-10oF [50o↔-23oC] : Hy-Gard 86o↔-40oF [30o↔-40oC] : Low-Viscosity Hy-Gard |
| Gears | 12 forward and reverse |
Transmission variants 3
| Adds a push-button high-low power shift to the PowrReverser transmission. Gear shifts are synchronized using the clutch. Tractor must be stopped to shift ranges. |
| Transmission | John Deere PowrReverser Hi/Lo |
|---|---|
| Oil capacity | 48 qts [45.4 L] |
| Clutch | Wet disc |
| Type | Two-speed power shift |
| Gears | 24 forward and reverse |
| 9-speed partially synchronized |
| 12-speed power shuttle |
| 24-speed two-speed power shift |
Mechanical Specs of John Deere, 5525Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Differential hydraulic wet disc brakes |
| Power steering |
| Open operator station with two-post folding ROPS. Optional isolated flat-platform (IOOS). Cab available with air-conditioning. |
| Final drives | Inboard planetary |
|---|---|
| Differential lock | Mechanical rear |
Power Information of John Deere, 5525Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Engine RPM | 540@2400 |
|---|---|
| Rear PTO | Independent |
| 540/540E OptOptional | |
| Rear PTO Type | 540 |
| Clutch | Dry disc |
| 540E@1700 | |
| 540/1000 *Optional field conversion kit. | |
| Electro-hydraulic wet disc (24-speed) |
Hydraulics Specifications of John Deere, 5525
Hydraulic system type, pressure, pump flow and valves.
| Steering press. | 1957 psi [134.9 bar] |
|---|---|
| Type | Open center |
| Pressure | 2828 psi [195.0 bar] |
| 12 gal (24-speed) [45.4 L] | |
| Capacity | 10.3 gal (9-speed) [39.0 L] |
| Pump flow | 18.4 gpm [69.6 lpm] |
| Rear valves | 1 to 3 |
| 11.5 gal (12-speed) [43.5 L] | |
| Steering flow | 6.6 gpm [25.0 lpm] |
| Total flow | 25 gpm [94.6 lpm] |
| Mid valves | 0, 2 or 3 |
Three-Point Hitch of John Deere, 5525
Hitch category and rear/front lift capacity.
| Rear Type | II/I |
|---|---|
| Control | Top-link draft sensing |
| Rear lift (at 24"/610mm) | 3374 lbs [1530 kg] |
Electrical System of John Deere, 5525
Battery voltage, charging system and ground.
| Battery volts | 12 |
|---|---|
| Ground | Negative |
| 120 OptOptional | |
| Cab Charging amps | 90 |
| Charging system | Alternator |
| Battery Group | BCI 31 |
| Battery CCA | 750 |
| ROPS Charging amps | 70 |
Frequently asked questions
How much horsepower does the John Deere 5525 have?
The John Deere 5525 delivers 91 HP.
What years was the John Deere 5525 produced?
The John Deere 5525 was produced in 2005-2008.
What engine does the John Deere 5525 have?
The John Deere 5525 is powered by a 4-cylinder engine.
What transmission does the John Deere 5525 use?
The John Deere 5525 uses a John Deere SyncShuttle transmission.
Is the John Deere 5525 4WD?
The John Deere 5525 is available in 2WD/4WD.