Introduction
Production Information of John Deere, 5605
The production information of the tractor (5605) includes details about its manufacturing.
| Utility tractor |
| Built in Montenegro, Brazil |
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, 5605
This section sums up the dimension and tires information of the tractor.
| Flange rear axle |
| Rear tread | 55.1 to 70.9 inches [139 to 180 cm] |
|---|---|
| Wheelbase | 85.7 inches [217 cm] |
| Front tread | 56.7 to 78.7 inches [144 to 199 cm] |
| Length | 151.6 inches [385 cm] |
| Front tread | 45.7 to 77.4 inches [116 to 196 cm] |
| Height | 103.1 inches [261 cm] |
| Standard tires (ag) | Front: 7.50-16. Rear: 18.4-30 (2WD) |
|---|---|
| Front: 14.9-24. Rear: 23.1-26 (4WD) | |
| Front: 7.50-16. Rear: 13.6-38 (2WD) | |
| Front: 12.4-24. Rear: 18.4-30 (4WD) | |
| Front: 12.4-24. Rear: 13.6-38 (4WD) | |
| Optional tires (ag) | Front: 7.50-18. Rear: 18.4-30 (2WD) |
Engine Specifications of John Deere, 5605
Get the specifications for the engine and if different options are available.
| Liquid-cooled |
| 4-cylinder |
| Starter volts | 12 |
|---|---|
| Displacement | 276 ci [4.5 L] |
| Oil capacity | 12.7 qts [12.0 L] |
| Rated RPM | 2400 |
| Bore/Stroke | 4.15x5.00 inches [105 x 127 mm] |
| Coolant capacity | 15.85 qts [15.0 L] |
| Torque RPM | 1600 |
| Torque | 195.5 lb-ft [265.1 Nm] |
| Power | 75 hp [55.9 kW] |
Transmission Information of John Deere, 5605Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Three gears (1-3) in three ranges (A-C). |
| Transmission | John Deere Top Shaft Synchronized (TSS) |
|---|---|
| Oil type | JD Hy-Gard |
| Oil capacity | 42.3 qts [40.0 L] |
| Gears | 9 forward and 3 reverse |
| JD Hy-Gard | |
| Clutch | Cerametalic dry disc |
Mechanical Specs of John Deere, 5605Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-post ROPS. |
| Hydraulic wet disc brakes |
| Drive | 4x2 2WD |
|---|---|
| 4x4 MFWD 4WD (optional) | |
| Steering | Hydrostatic power |
Power Information of John Deere, 5605Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Clutch | Mechanical dry disc |
| Rear PTO Type | 540 |
Hydraulics Specifications of John Deere, 5605
Hydraulic system type, pressure, pump flow and valves.
| Oil type | JD Hy-Gard |
|---|---|
| Type | Open center gear pump |
| Pump flow | 11.36 gpm [43.0 lpm] |
| Valves | 2 |
| Capacity | 10.6 gal [40.1 L] |
| JD Hy-Gard | |
| SCV flow | 10.57 gpm [40.0 lpm] |
| Pressure | 2756 psi [190.0 bar] |
| Steering flow | 6.9 gpm [26.1 lpm] |
Three-Point Hitch of John Deere, 5605
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Rear lift (at 24"/610mm) | 3,968 lbs [1799 kg] |
| Control | Position and depth control |
| Rear lift (at ends) | 6,805 lbs [3086 kg] |
Electrical System of John Deere, 5605
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery AH | 100 |
| Battery volts | 12 |
| Charging system | Alternator |
| Charging amps | 52 |
Frequently asked questions
How much horsepower does the John Deere 5605 have?
The John Deere 5605 delivers 75 HP.
What years was the John Deere 5605 produced?
The John Deere 5605 was produced in 2000-2011.
What engine does the John Deere 5605 have?
The John Deere 5605 is powered by a 4-cylinder engine.
What transmission does the John Deere 5605 use?
The John Deere 5605 uses a John Deere Top Shaft Synchronized (TSS) transmission.
Is the John Deere 5605 4WD?
The John Deere 5605 is available in 2WD/4WD.