John Deere 6110D
Power
106 hp
Production
2008-2018
Transmission
John Deere Collar Shift
Weight
8,532 lbs [3870 kg]
Drive
2WD/4WD
From the same series:
Introduction
John Deere 6110D Utility Tractor
The John Deere 6110D is a utility tractor produced in Saltillo, Mexico, between 2008 and 2018. It belongs to the 6125D series and is engineered for general agricultural applications, offering a balance of mechanical simplicity and operational versatility.
Engine and Performance
The tractor is powered by a 276 cubic-inch (4.5 L) engine capable of delivering a rated gross power of 106 hp (79.0 kW) at 2100 RPM. The engine features a 17:1 compression ratio and uses a dry element air cleaner with a pre-cleaner to protect internal components during heavy-duty field work.
Transmission and Drivetrain
The 6110D offers two transmission configurations: a standard Collar Shift with unsynchronized gears, or the Top Shaft Synchronized (TSS) version. Both provide 9 forward and 3 reverse gears. The tractor is equipped with a mechanical dry disc clutch and is available in either a 4x2 2WD configuration or with optional 4x4 MFWD (Mechanical Front Wheel Drive) for improved traction.
Hydraulics and Hitch
The hydraulic system utilizes an open-center design with a pump flow of 17.6 gpm (66.6 lpm) and a system pressure of 2830 psi (195.1 bar). The Category II rear hitch is controlled by a mechanical lower link system, providing a lift capacity of 6,946 lbs (3150 kg) at 24 inches behind the lift points.
Power Take-Off
The independent rear PTO operates at 540 and 1000 RPM, both achieved at a rated engine speed of 2100 RPM. This dual-speed capability allows for the operation of a wide range of standard implements, utilizing a 1.375-inch shaft diameter.
Conclusion
The John Deere 6110D is a robust utility tractor suited for farmers and operators requiring a reliable machine for standard agricultural tasks. With its optional 4WD capability, substantial hydraulic output, and straightforward mechanical transmission options, it serves as a functional workhorse for various farm management operations.
Production Information of John Deere, 6110D
- Utility tractor
- Built in Saltillo, Mexico
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, 6110D
| Shipping weight | 8,532 lbs [3870 kg] |
|---|---|
| Wheelbase | 92.5 inches [234 cm] |
| Height (cab) | 107.5 inches [273 cm] |
| Width | 72 inches [182 cm] |
| 2WD Length | 168.5 inches [427 cm] |
| Max weight | 12,790 lbs [5801 kg] |
| Height (exhaust) | 106 inches [269 cm] |
| 4WD Length | 166 inches [421 cm] |
| Rear axle | 72 inch length [1828 mm (flange)] |
| Standard tires (ag) | Front: 14.9-24. Rear: 23.1-30 |
|---|
Engine Specifications of John Deere, 6110D
| Intake valve clearance | 0.014 inches [0.356 mm] |
|---|---|
| Coolant capacity | 17.4 qts [16.5 L] |
| Coolant capacity(optional) | 500 h (JD TorqGARD oil) |
| Air cleaner | Dry element with pre-cleaner |
| Exhaust valve clearance | 0.018 inches [0.457 mm] |
| Rated RPM | 2100 |
| Idle RPM | 950-2275 |
| Compression | 17:1 |
| Displacement | 276 ci [4.5 L] |
| Rated Power (gross) | 106 hp [79.0 kW] |
| Oil capacity | 13 qts [12.3 L] |
| Oil change | 250 h |
| Bore/Stroke | 4.19x5.00 inches [106 x 127 mm] |
| Starter volts | 12 |
| Starter | Electric |
| Firing order | 1-3-4-2 |
Transmission Information of John Deere, 6110D
Transmission variants 1
- Three gears (1-3) plus reverse (R) in each of three ranges (A-C). Tractor must be stopped, and clutch used, to shift gear or range.
| Transmission | John Deere Collar Shift |
|---|---|
| Oil capacity | 61.2 qts [57.9 L] |
| Clutch | Dry disc |
| Type | Unsynchronized gear |
| Gears | 9 forward and 3 reverse |
Transmission variants 2
- Three gears (1-3) plus reverse (R) in each of three ranges (A-C). Shifts between gears, including to reverse, are synchronized using the clutch. Shifts between ranges are not synchronized, the operator must stop the tractor and use the clutch.
| Transmission | John Deere Top Shaft Syncronized (TSS) |
|---|---|
| Oil capacity | 61.2 qts [57.9 L] |
| Clutch | Dry disc |
| Type | Partially synchronzied |
| Gears | 9 forward and 3 reverse |
- 9-speed unsynchronized gear
- 9-speed partially synchronzied
Mechanical Specs of John Deere, 6110D
- Two-post ROPS. Cab optional.
- Mechanical wet disc brakes
| Drive | 4x2 2WD |
|---|---|
| Drive(optional) | 4x4 MFWD 4WD (optional) |
| Steering | Hydrostatic power |
Power Information of John Deere, 6110D
| Rear PTO | Independent |
|---|---|
| Rear PTO(optional) | 1000@2100 |
| Engine RPM | 540@2100 |
| Clutch | Mechanical dry disc |
| Rear PTO Type | 540/1000 (1.375) |
Hydraulics Specifications of John Deere, 6110D
| Type | Open center |
|---|---|
| Pump flow | 17.6 gpm [66.6 lpm] |
| Rear valves | 2 to 3 |
| Capacity | 15.3 gal [57.9 L] |
| Steering flow | 6.9 gpm [26.1 lpm] |
| Pressure | 2830 psi [195.1 bar] |
Three-Point Hitch of John Deere, 6110D
| Rear Type | II |
|---|---|
| Rear lift (at 24"/610mm) | 6,946 lbs [3150 kg] |
| Control | Mechanical lower link |
| Rear lift (at ends) | 7,649 lbs [3469 kg] |
Electrical System of John Deere, 6110D
| Battery AH | 102 |
|---|---|
| Ground | Negative |
| Battery CCA | 550 |
| Battery CCA(optional) | 90 (cab) |
| Charging system | Alternator |
| Battery Group | 27 |
| Battery volts | 12 |
| Charging amps | 70 (ROPS) |
Where it sits
With 106 HP, the John Deere 6110D sits just below 6125D (123 HP) in John Deere's range. Its power puts it in the 68th percentile of 2000s models in our database (2822 machines).
Frequently asked questions
How much horsepower does the John Deere 6110D have?
The John Deere 6110D delivers 106 HP.
What years was the John Deere 6110D produced?
The John Deere 6110D was produced in 2008-2018.
What transmission does the John Deere 6110D use?
The John Deere 6110D uses a John Deere Collar Shift transmission.
How much does the John Deere 6110D weigh?
The John Deere 6110D weighs 8,532 lbs [3870 kg].
Is the John Deere 6110D 4WD?
The John Deere 6110D is available in 2WD/4WD.