John Deere 6110E
Power
110 hp
Production
2010-2020
Engine
Turbocharged diesel, 4-cylinder
Transmission
John Deere SyncroPlus
Weight
13,230 lbs [6001 kg]
Drive
4WD
From the same series:
Introduction
Production Information of John Deere, 6110E
The production information of the tractor (6110E) includes details about its manufacturing.
| Utility tractor |
| Built in Montenegro, Brazil |
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, 6110E
This section sums up the dimension and tires information of the tractor.
| Flange rear axle |
| Wheelbase | 94.5 inches [240 cm] |
|---|---|
| Ballasted weight | 13,230 lbs [6001 kg] |
| Weight | 8,730 lbs [3959 kg] |
| Length | 179.8 inches [456 cm] |
| Height | 105.2 inches [267 cm] |
| Standard tires (ag) | Front: 18.4-34. Rear: 14.9-24 |
|---|
Engine Specifications of John Deere, 6110E
Get the specifications for the engine and if different options are available.
| Liquid-cooled |
| Turbocharged diesel |
| 4-cylinder |
| Power | 110 hp [82.0 kW] |
|---|---|
| Displacement | 276 ci [4.5 L] |
| Rated RPM | 2300 |
| Bore/Stroke | 4.15x5.00 inches [105 x 127 mm] |
| Starter volts | 12 |
Transmission Information of John Deere, 6110EY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Three synchronized gears (1-3) in four synchronized ranges (A-D). |
| Transmission | John Deere SyncroPlus |
|---|---|
| Oil type | JD Hy-Gard |
| Clutch | Hydraulic wet discs |
| Type | Fully synchronized |
| JD Hy-Gard | |
| Gears | 12 forward and 4 reverse |
Mechanical Specs of John Deere, 6110EY
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Two-post ROPS. |
| Hydraulic wet disc brakes |
| Steering | Hydrostatic power |
|---|
Power Information of John Deere, 6110EY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| 540 | |
| Clutch | Electro-hydraulic |
| Rear PTO Type | 540/1000 |
Hydraulics Specifications of John Deere, 6110E
Hydraulic system type, pressure, pump flow and valves.
| Type | Load sensing |
|---|---|
| Oil type | JD Hy-Gard |
| Pump flow | 14.27 gpm [54.0 lpm] |
| Pressure | 2756 psi [190.0 bar] |
| JD Hy-Gard | |
| Valves | 2 |
Three-Point Hitch of John Deere, 6110E
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Rear lift (at ends) | 7,540 lbs [3420 kg] |
| Rear lift (at 24"/610mm) | 4,960 lbs [2249 kg] |
Electrical System of John Deere, 6110E
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Charging system | Alternator |
| Charging amps | 90 |
Frequently asked questions
How much horsepower does the John Deere 6110E have?
The John Deere 6110E delivers 110 HP.
What years was the John Deere 6110E produced?
The John Deere 6110E was produced in 2010-2020.
What engine does the John Deere 6110E have?
The John Deere 6110E is powered by a Turbocharged diesel, 4-cylinder engine.
What transmission does the John Deere 6110E use?
The John Deere 6110E uses a John Deere SyncroPlus transmission.
How much does the John Deere 6110E weigh?
The John Deere 6110E weighs 13,230 lbs [6001 kg].
Is the John Deere 6110E 4WD?
The John Deere 6110E is available in 4WD.