John Deere 8235R
Power
235 hp
Production
2011-2013
Engine
Dual turbochargers diesel, 6-cylinder 24-valve
Transmission
John Deere Automatic PowerShift
Weight
27,218 lbs [12346 kg]
Drive
2WD/4WD
From the same series:
Introduction
John Deere 8235R Row-Crop Tractor
The John Deere 8235R is a high-horsepower row-crop tractor produced between 2011 and 2013 at the Waterloo, Iowa, facility. It is designed for intensive agricultural operations, offering a balance of structural durability and advanced electronic management systems.
Engine and Powertrain
The tractor is powered by the 9.0-liter John Deere PowerTech PSX 6-cylinder diesel engine, featuring a 24-valve configuration and dual turbochargers. It produces a rated gross power of 235 hp at 2100 RPM. The Intelligent Power Management (IPM) system is available as an option, providing a 35 hp boost for demanding applications. The engine meets Stage IIIB and Interim Tier IV emission standards using exhaust gas recirculation.
Transmission Options
Operators can choose between two transmission types. The 16-speed full power shift automatic transmission allows for gear changes under load, managed by a computer to optimize performance based on load conditions. Alternatively, the AutoPowr infinitely variable transmission (IVT) provides continuous speed control for specialized tasks requiring precise ground speed.
Hydraulics and Hitch
The hydraulic system utilizes a closed-center, pressure-flow compensated design. Standard pump flow is 35 gpm, with a total system flow of 44 gpm, expandable to 60 gpm. The rear 3-point hitch is rated as category 3/3N, with lift capacities varying by model year, reaching up to 18,700 lbs in 2012 configurations.
Operator Environment
The 8235R comes standard with the CommandView II cab, which includes factory-installed heating and air conditioning to support operator efficiency. Steering is handled by a hydrostatic power system, with the optional ActiveCommand Steering (ACS) available for enhanced maneuverability and reduced operator fatigue.
Conclusion
With an operating weight ranging from approximately 27,218 lbs to over 30,000 lbs depending on axle configuration, the John Deere 8235R is engineered for heavy traction and implement management in large-scale row-crop farming environments.
Production Information of John Deere, 8235R
- For the 2012 model year the three-point hitch lift capacity on the John Deere 8235R was increased by several hundred pounds.
- Row-Crop tractor
- Built in Waterloo, Iowa, USA
| Manufacturer | John Deere |
|---|---|
| Original price | $182,672 (2011) |
Dimension and Tires Information of John Deere, 8235R
| Wheelbase | 126.7 inches (2WD) [321 cm] |
|---|---|
| Wheelbase(optional) | 20.1 inches (ILS) [51 cm] |
| Wheelbase(optional) | 23.5 inches (1500) [59 cm] |
| Length | 243.9 inches [619 cm] |
| Length(optional) | 137.3 inches (clearance lamps) [348 cm] |
| Clearance (rear axle) | 24.9 inches [63 cm] |
| Clearance (rear axle)(optional) | 118.9 inches (1500/ILS) [302 cm] |
| Operating weight | 27,218 lbs [12346 kg] |
| Operating weight(optional) | 175.1 inches (extra-long lamps) [444 cm] |
| Operating weight(optional) | 258.3 inches (with front weights) [656 cm] |
| Operating weight(optional) | 118.5 inches (long axle) [300 cm] |
| Operating weight(optional) | 120.1 inches (1300 MFWD) [305 cm] |
| Operating weight(optional) | 24.3 inches (1300) [61 cm] |
| Width | 96 inches (axle) [243 cm] |
| Height (cab) | 138.9 inches [352 cm] |
| Clearance (drawbar) | 12.6 inches [32 cm] |
| Clearance (front axle) | 29.4 inches (2WD) [74 cm] |
| Clearance (front axle)(optional) | 30,252 lbs (ILS) [13722 kg] |
| Ag front | 11.00-24 (2WD) |
|---|---|
| Ag front(optional) | 420/90R30 (4WD) |
| Ag rear | 480/80R46 |
Engine Specifications of John Deere, 8235R
- John Deere PowerTech PSX
- Liquid-cooled inline
- Optional Intelligent Power Management (IPM) provides a 35HP increase at rated speed.
- Dual turbochargers diesel
- 6-cylinder 24-valve
| Pre-heating | Ether (optional) |
|---|---|
| Starter volts | 12 |
| Emissions | Interim Tier IV |
| Compression | 16:1 |
| Oil capacity | 26.4 qts (1300 axle) [25.0 L] |
| Coolant capacity | 43.3 qts [41.0 L] |
| Emission control | Exhaust gas recirculation (EGR) |
| Emission control(optional) | Stage IIIB |
| Rated Power (gross) | 235 hp [175.2 kW] |
| Oil change | 250 h |
| Bore/Stroke | 4.66x5.35 inches [118 x 136 mm] |
| Displacement | 548 ci [9.0 L] |
| Air cleaner | Dual stage |
| Rated RPM | 2100 |
| Rated RPM(optional) | 500 h (JD Plus-50 II oil) |
| Starter | Electric |
| Starter(optional) | 280 hp (IPM) [208.8 kW] |
| Maximum Power (gross) | 259 hp [193.1 kW] |
Transmission Information of John Deere, 8235R
Transmission variants 1
- Automatic PowerShift uses computer control to shift based on load up to the highest selected gear. Fifth reverse is optional through dealer re-programming.
| Transmission | John Deere Automatic PowerShift |
|---|---|
| Type | Full power shift |
| Gears | 16 forward and 4 reverse |
Transmission variants 2
- IVT available with right- or left-hand reverser.
| Transmission | John Deere AutoPowr |
|---|---|
| Type | Infinitely variable transmission (IVT) |
| Gears | Infinite forward and reverse |
- 16-speed full power shift
- Infinitely variable transmission (IVT)
Mechanical Specs of John Deere, 8235R
- Two- or four-wheel drive
- CommandView II cab standard with heat and air-conditioning.
- Differential hydraulic wet disc brakes
| Trailer brakes | Hydraulic and air optional |
|---|---|
| Trailer brakes(optional) | ActiveCommand Steering optional (ACS) |
| Steering | Hydrostatic power |
| Differential lock | Hydraulic rear lock |
| Differential lock(optional) | Front lock on 1500 and ILS front axles |
Power Information of John Deere, 8235R
| Rear PTO | Independent |
|---|---|
| Rear PTO(optional) | 540 (1-3/8 optional) |
| Rear PTO Type | 1000 (1-3/4) |
| Rear PTO Type(optional) | 1000 (1-3/8 optional) |
Hydraulics Specifications of John Deere, 8235R
| Type | Closed center pressure-flow compensated |
|---|---|
| Total flow | 44 gpm [166.5 lpm] |
| Pump flow | 35 gpm [132.5 lpm] |
| Pressure | 2900 psi [200.0 bar] |
| Pressure(optional) | 60 gpm (optional) [227.1 lpm] |
| Rear valves | 3 to 5 |
Three-Point Hitch of John Deere, 8235R
| Rear Type | 3/3N |
|---|---|
| Rear Type(optional) | 18,300 lbs (4N/3 2011) [8300 kg] |
| Rear Type(optional) | 17,300 lbs (3/3N 2011) [7847 kg] |
| Rear Type(optional) | 4N/3 |
| Rear Type(optional) | 18,700 lbs (4N/3 2012) [8482 kg] |
| Rear Type(optional) | 13,600 lbs (3/3N 2012) [6168 kg] |
| Rear lift (at 24"/610mm) | 13,300 lbs (3/3N 2011) [6032 kg] |
| Rear lift (at 24"/610mm)(optional) | 12,300 lbs [5579 kg] |
| Front lift (at ends) | 8,800 lbs [3991 kg] |
| Front Hitch | 3N/2 (optional) |
| Front Hitch(optional) | 17,600 lbs (3/3N 2012) [7983 kg] |
Electrical System of John Deere, 8235R
| Ground | Negative |
|---|---|
| Battery CCA | 925 |
| Batteries | 2 |
| Charging system | Alternator |
| Battery volts | 12 |
| Charging amps | 200 |
Where it sits
With 235 HP, the John Deere 8235R sits between 8225R (225 HP) and 8245R (245 HP) in John Deere's range. Its power puts it in the 86th percentile of 2010s models in our database (2476 machines).
Frequently asked questions
How much horsepower does the John Deere 8235R have?
The John Deere 8235R delivers 235 HP.
What years was the John Deere 8235R produced?
The John Deere 8235R was produced in 2011-2013.
What engine does the John Deere 8235R have?
The John Deere 8235R is powered by a Dual turbochargers diesel, 6-cylinder 24-valve engine.
What transmission does the John Deere 8235R use?
The John Deere 8235R uses a John Deere Automatic PowerShift transmission.
How much does the John Deere 8235R weigh?
The John Deere 8235R weighs 27,218 lbs [12346 kg].
Is the John Deere 8235R 4WD?
The John Deere 8235R is available in 2WD/4WD.