John Deere 8400
Power
250 hp[P] hp
Production
1995-1999
Engine
Turbocharged aftercooled diesel, 6-cylinder 12-valve
Transmission
John Deere PowerShift
Drive
4WD
From the same series:
Introduction
Production Information of John Deere, 8400
The production information of the tractor (8400) includes details about its manufacturing.
| Row-Crop tractor |
| Built in Waterloo, Iowa, USA |
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, 8400
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 116.1 inches [294 cm] |
|---|---|
| Rack and pinion rear axle | 4.331 by 118.5 inches [110 by 3009 mm] |
| Clearance (front axle) | 23.2 inches [58 cm] |
| Length | 206.5 inches [524 cm] |
| Front tread | 60 to 88 inches [152 to 223 cm] |
| Height (cab) | 120.2 inches [305 cm] |
| Standard tires (ag) | Front: 14.9R34. Rear: 18.4R46 |
|---|
Engine Specifications of John Deere, 8400
Get the specifications for the engine and if different options are available.
| John Deere |
| Liquid-cooled inline |
| Turbocharged aftercooled diesel |
| 6-cylinder 12-valve |
| Coolant capacity | 30 qts [28.4 L] |
|---|---|
| Displacement | 496 ci [8.1 L] |
| Rated RPM | 2200 |
| Bore/Stroke | 4.56x5.06 inches [116 x 129 mm] |
| Oil capacity | 29.6 qts [28.0 L] |
| Starter volts | 12 |
| Compression | 15.1:1 |
Transmission Information of John Deere, 8400Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | John Deere PowerShift |
|---|---|
| Oil capacity | 148 qts [140.1 L] |
| Clutch | Hydraulic wet disc |
| Type | Full power shift |
| Gears | 16 forward and 4 reverse |
Mechanical Specs of John Deere, 8400Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Differential hydraulic wet disc brakes |
| Power steering |
| CommandView Cab standard. Row-Trak guidance optional. |
| Final drives | Inboard planetary |
|---|---|
| Differential lock | Electro-hydraulic |
Power Information of John Deere, 8400Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| 1000@2200 | |
| Rear PTO | Independent |
| 540 (1.375)OptOptional | |
| 1000 (1.375)OptOptional | |
| Clutch | Hydraulic wet disc |
| Engine RPM | 540@1930 |
| Rear PTO Type | 1000 (1.75) |
Hydraulics Specifications of John Deere, 8400
Hydraulic system type, pressure, pump flow and valves.
| Type | Closed center pressure-flow compensated (PFC) |
|---|---|
| SCV flow | 30 gpm [113.6 lpm] |
| Valves | 3 to 5 |
| Capacity | 37 gal [140.0 L] |
| Pressure | 2900 psi [200.0 bar] |
Three-Point Hitch of John Deere, 8400
Hitch category and rear/front lift capacity.
| Rear Type | III/IIIN |
|---|---|
| 15650 lbsOptOptional [7098 kg] | |
| Control | Electro-hydraulic draft sensing |
| Rear lift | 11700 lbs [5307 kg] |
Electrical System of John Deere, 8400
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery CCA | 925 |
| Batteries | 2 |
| Charging system | Alternator |
| Battery volts | 12 |
| Charging amps | 140 |
Frequently asked questions
How much horsepower does the John Deere 8400 have?
The John Deere 8400 delivers 250 hp[P] HP.
What years was the John Deere 8400 produced?
The John Deere 8400 was produced in 1995-1999.
What engine does the John Deere 8400 have?
The John Deere 8400 is powered by a Turbocharged aftercooled diesel, 6-cylinder 12-valve engine.
What transmission does the John Deere 8400 use?
The John Deere 8400 uses a John Deere PowerShift transmission.
Is the John Deere 8400 4WD?
The John Deere 8400 is available in 4WD.