John Deere 9230
Power
325 hp
Production
2007-2011
Engine
6-cylinder
Transmission
John Deere PowrSync
Drive
4WD
From the same series:
Introduction
John Deere 9230: Heavy-Duty Four-Wheel Drive Tractor
The John Deere 9230 is a high-horsepower four-wheel drive tractor manufactured in Waterloo, Iowa, between 2007 and 2011. Designed for large-scale agricultural operations, this machine focuses on high traction and heavy implement handling.
Engine and Performance
The tractor is powered by a 9.0-liter, 6-cylinder liquid-cooled engine. It delivers a rated power of 325 horsepower (242.4 kW) at 2100 rated RPM. The engine meets Tier III emission standards and utilizes a dual paper element air cleaner system to ensure performance in dusty field conditions.
Transmission and Drivetrain
The 9230 offers two primary transmission configurations: the John Deere PowrSync, a 24-speed partial power shift transmission, and the John Deere PowerShift, an 18-speed full power shift transmission. Both systems utilize hydraulic or electronic wet disc clutches to facilitate smooth gear transitions under load.
Hydraulic System
The hydraulic system features a closed-center, pressure and flow compensating design. Depending on the configuration, total flow capacity can reach up to 78 gpm (295.2 lpm) with the high-flow option. The system provides between 4 and 6 valves, operating at a pressure of 2900 psi (200 bar), ensuring compatibility with demanding implements.
Operator Environment and Dimensions
The tractor is equipped with the CommandView cab, which includes air conditioning as standard, with options for automatic climate control and leather trim. The unit sits on a 137.8-inch wheelbase with an overall length of 270 inches. It is configured for four-wheel drive operation, utilizing hydraulic wet disc brakes and optional hydraulic differential locks for enhanced traction.
Conclusion
The John Deere 9230 is engineered for intensive field tasks such as heavy tillage and large-scale seeding. Its combination of high hydraulic output, multiple transmission choices, and a robust 325-horsepower engine makes it a reliable asset for operators requiring sustained performance in demanding agricultural environments.
Production Information of John Deere, 9230
- Four-wheel Drive (4WD) tractor
- Built in Waterloo, Iowa, USA
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, 9230
| Rear axle | 3.937 by 120 inches [99 by 3048 mm] |
|---|---|
| Wheelbase | 137.8 inches [350 cm] |
| Ground clearance | 18.5 inches (hinge pin) [46 cm] |
| Width | 118.6 inches [301 cm] |
| Length | 270 inches [685 cm] |
| Rear axle | 4.331 by 120 inches [110 by 3048 mm (optional)] |
| Clearance (rear axle) | 28.8 inches [73 cm] |
| Clearance (rear axle)(optional) | 285 inches (with 3-point) [723 cm] |
| Ag front | 620/70 R42 |
|---|---|
| Ag rear | 620/70 R42 |
Engine Specifications of John Deere, 9230
- Liquid-cooled inline
- 6-cylinder
| Rated RPM | 2100 |
|---|---|
| Displacement | 549.2 ci [9.0 L] |
| Oil capacity | 33.6 qts [31.8 L] |
| Power | 325 hp [242.4 kW] |
| Bore/Stroke | 4.661x5.354 inches [118 x 136 mm] |
| Coolant capacity | 50 qts [47.3 L] |
| Starter volts | 12 |
| Compression | 16.3:1 |
| Air cleaner | Dual paper elements |
| Emissions | Tier III |
Transmission Information of John Deere, 9230
Transmission variants 1
- Three gears (1-3) in four ranges (A-D) with high-low power shift. Gears and range shifts are synchronized using the clutch.
| Transmission | John Deere PowrSync |
|---|---|
| Clutch | Hydraulic wet disc |
| Type | Partial power shift |
| Gears | 24 forward and 6 reverse |
Transmission variants 2
| Transmission | John Deere PowerShift |
|---|---|
| Clutch | Electronic wet disc |
| Type | Full power shift |
| Gears | 18 forward and 6 reverse |
- 24-speed partial power shift
- 18-speed full power shift
Mechanical Specs of John Deere, 9230
- Four-wheel drive
- Hydraulic wet discs brakes
- CommandView Cab standard with air-conditioning. Optional automatic climate control and leather trim.
| Trailer brakes | Hydraulic optional |
|---|---|
| Differential lock | Hydraulic differential lock optional |
| Steering | Hydrostatic power |
Power Information of John Deere, 9230
| Rear PTO | Independent (optional) |
|---|---|
| Clutch | Electro-hydraulic wet disc |
| Rear PTO Type | 1000 (1.75) |
Hydraulics Specifications of John Deere, 9230
| Hi-Flow Total flow | 78 gpm [295.2 lpm] |
|---|---|
| Type | Closed-center pressure and flow compensating |
| Type(optional) | 31 gal (high-flow and 3-point) [117.3 L] |
| Type(optional) | 20 gal (high-flow) [75.7 L] |
| Capacity | 27 gal [102.2 L] |
| SCV flow | 30 gpm [113.6 lpm] |
| Pressure | 2900 psi [200.0 bar] |
| Pressure(optional) | 28 gal (3-point) [106.0 L] |
| PowerShift Total flow | 48 gpm [181.7 lpm] |
| PowrSync Total flow | 44 gpm [166.5 lpm] |
| Valves | 4 to 6 |
Three-Point Hitch of John Deere, 9230
| Rear Type | 4N/3 |
|---|---|
| Drawbar | Catergory 4 standard with secondary chain support. Optional reinforcement up to 11,000 pounds. Optional 12,000 pounds Catergory 5 drawbar, not available with 3-point hitch or PTO. |
| Drawbar(optional) | 4N/4 |
| Rear lift (at 24"/610mm) | 15,300 lbs [6940 kg] |
Electrical System of John Deere, 9230
| Ground | Negative |
|---|---|
| Battery CCA | 950 |
| Batteries | 2 |
| Charging system | Alternator |
| Battery volts | 12 |
| Charging amps | 200 |
Where it sits
With 325 HP, the John Deere 9230 sits just below 9360R (360 HP) in John Deere's range. Its power puts it in the 95th percentile of 2000s models in our database (2822 machines).
Frequently asked questions
How much horsepower does the John Deere 9230 have?
The John Deere 9230 delivers 325 HP.
What years was the John Deere 9230 produced?
The John Deere 9230 was produced in 2007-2011.
What engine does the John Deere 9230 have?
The John Deere 9230 is powered by a 6-cylinder engine.
What transmission does the John Deere 9230 use?
The John Deere 9230 uses a John Deere PowrSync transmission.
Is the John Deere 9230 4WD?
The John Deere 9230 is available in 4WD.