John Deere 9400
Power
425 hp
Production
1997-2001
Engine
6-cylinder
Transmission
John Deere Syncro
Drive
4WD
From the same series:
Introduction
Production Information of John Deere, 9400
The production information of the tractor (9400) includes details about its manufacturing.
| Original price was $121,000 in 2001 |
| Four-wheel Drive (4WD) tractor |
| Built in Waterloo, Iowa, USA |
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, 9400
This section sums up the dimension and tires information of the tractor.
| Rear axle | 4.31 by 120 inches [109 by 3048 mm] |
|---|---|
| Wheelbase | 137.8 inches [350 cm] |
| Ground clearance | 28.8 inches (axles) [73 cm] |
| Height (cab) | 137.5 inches [349 cm] |
| Length | 274 inches [695 cm] |
| Front axle | 4.31 by 120 inches [109 by 3048 mm] |
| Width | 172 inches (duals) [436 cm] |
| Ag front | 710/70R38 |
|---|---|
| Ag rear | 710/70R38 |
Engine Specifications of John Deere, 9400
Get the specifications for the engine and if different options are available.
| Liquid-cooled inline |
| 6-cylinder |
| Power | 425 hp [316.9 kW] |
|---|---|
| Displacement | 765 ci [12.5 L] |
| Oil capacity | 44 qts [41.6 L] |
| Compression | 16:1 |
| Bore/Stroke | 5.00x6.50 inches [127 x 165 mm] |
| Coolant capacity | 64 qts [60.6 L] |
| Rated RPM | 2100 |
Transmission Information of John Deere, 9400Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Three speeds (1-3 and reverse) in four ranges (A-D). Synchronized shifting between speeds using the clutch. Tractor must be stopped, and clutch used, to shift ranges. Reverse is not available in the highest (D) range. |
| 155.6 qts (PTO 110mm axle) [147.3 L] | |
| Transmission | John Deere Syncro |
| 151.6 qts (110mm axle) [143.5 L] | |
| Oil capacity | 147.2 qts (100mm axle) [139.3 L] |
| Type | Partially synchronized |
| 140 qts (SN030001+) [132.5 L] | |
| 151.2 qts (PTO 100mm axle) [143.1 L] | |
| Gears | 12 forward and 3 reverse |
Transmission variants 2
| Three speeds (1, 2, 3 and reverse) in four ranges (A-D) plus high-low power shift. Speeds and ranges may be shifted on the move, using the clutch. High-low power shift for each speed using lever. |
| 155.6 qts (PTO 110mm axle) [147.3 L] | |
| Transmission | John Deere PowrSync |
| 151.6 qts (110mm axle) [143.5 L] | |
| Oil capacity | 147.2 qts (100mm axle) [139.3 L] |
| Type | Partial power shift |
| 140 qts (SN030001+) [132.5 L] | |
| 151.2 qts (PTO 100mm axle) [143.1 L] | |
| Gears | 24 forward and 6 reverse |
Transmission variants 3
| 54 qts (no PTO late) [51.1 L] | |
| Transmission | John Deere PowerShift |
| 56 qts (SN030001+) [53.0 L] | |
| Oil capacity | 64 qts (early) [60.6 L] |
| Type | Full power shift |
| 120 qts (axles early) [113.6 L] | |
| 60 qts (no PTO early) [56.8 L] | |
| Gears | 12 forward and 2 reverse |
| 108 qts (axles SN030001+) [102.2 L] |
| 12-speed partially synchronized |
| 24-speed partial power shift |
| 12-speed full power shift |
Mechanical Specs of John Deere, 9400Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Cab standard. |
| Hydraulic wet disc brakes |
| Steering | Hydrostatic power |
|---|
Power Information of John Deere, 9400Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 1000 OptOptional |
Hydraulics Specifications of John Deere, 9400
Hydraulic system type, pressure, pump flow and valves.
| Type | Closed center PFC |
|---|---|
| Pump flow | 35 gpm [132.5 lpm] |
| Valves | 2 to 5 |
| Capacity | 26 gal [98.4 L] |
| Total flow | 44 gpm [166.5 lpm] |
| Pressure | 2900 psi [200.0 bar] |
Three-Point Hitch of John Deere, 9400
Hitch category and rear/front lift capacity.
| Rear Type | III |
|---|---|
| 14,445 lbs*Cat. IV [6552 kg] | |
| IV/IVN OptOptional | |
| Rear lift | 13,871 lbs [6291 kg] |
Electrical System of John Deere, 9400
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery CCA | 925 |
| Batteries | 3 |
| Charging system | Alternator |
| Battery volts | 12 |
| Charging amps | 140 |
Frequently asked questions
How much horsepower does the John Deere 9400 have?
The John Deere 9400 delivers 425 HP.
What years was the John Deere 9400 produced?
The John Deere 9400 was produced in 1997-2001.
What engine does the John Deere 9400 have?
The John Deere 9400 is powered by a 6-cylinder engine.
What transmission does the John Deere 9400 use?
The John Deere 9400 uses a John Deere Syncro transmission.
Is the John Deere 9400 4WD?
The John Deere 9400 is available in 4WD.