John Deere 9R 440 tractor

John Deere 9R 440

Power

434 hp

Production

2021+

Engine

Turbocharged aftercooled diesel, 6-cylinder 24-valve

Transmission

E18

Weight

62000 lbs [28123 kg]

Drive

4WD

From the same series:

9R 390
9R 490

Introduction

John Deere 9R 440: Articulated 4WD Tractor

The John Deere 9R 440 is a high-horsepower, articulated four-wheel-drive tractor designed for large-scale agricultural operations. Introduced as part of the 9R series, this model represents a heavy-duty platform engineered for demanding traction and field tasks.

Engine and Powertrain

The tractor is powered by a 13.6-liter, 6-cylinder, 24-valve liquid-cooled diesel engine. It features a turbocharged and aftercooled induction system combined with an electronic high-pressure common rail fuel system. The engine delivers a rated power of 434.5 hp (324.0 kW) at 2100 RPM, with a maximum gross power output of 477.4 hp (356.0 kW). A 12-volt electric starter system and a dry air cleaner are standard.

Transmission and Drivetrain

The 9R 440 utilizes the e18 full power shift transmission, providing 18 forward and 6 reverse gears to accommodate various field speeds. The drivetrain features permanent four-wheel drive with articulated power steering. Final drives are of the inboard planetary type, and the machine is equipped with hydraulic wet disc brakes and electro-hydraulic differential locks on both the front and rear axles.

Hydraulics and Hitch

The hydraulic system is a closed-center, pressure and flow-compensated design. It provides a standard pump flow of 55 gpm (208.2 lpm), with optional configurations reaching up to 110 gpm (416.4 lpm). The system supports between 4 and 8 selective control valves (SCVs). The rear hitch is a Category IVN/IV setup with a lift capacity of 15,000 lbs (6,804 kg) measured at 24 inches behind the lift point.

Dimensions and Weight

The tractor has a wheelbase of 154 inches (391 cm) and an overall length of 312.8 inches (794 cm). The minimum width over tires is 173.3 inches (440 cm). The shipping weight is approximately 45,980 lbs (20,856 kg), with a maximum allowable weight of 62,000 lbs (28,123 kg), allowing for significant ballast to maximize traction.

Conclusion

The John Deere 9R 440 is purpose-built for heavy-duty primary tillage and large-acreage operations. Its robust engine, flexible transmission, and high-capacity hydraulic system make it suitable for farmers and agricultural contractors requiring sustained power for demanding implements.

Production Information of John Deere, 9R 440

  • Original price was $559,017 in 2023
  • Four-wheel Drive (4WD) tractor
  • Built in Waterloo, Iowa, USA
ManufacturerJohn Deere

Dimension and Tires Information of John Deere, 9R 440

Max weight62000 lbs [28123 kg]
Wheelbase154 inches [391 cm]
Height (exhaust)147.1 inches [373 cm]
Height (cab)147.3 inches [374 cm]
Length312.8 inches [794 cm]
Front axle4.72 by 120 inches [119 by 3048 mm]
Shipping weight45980 lbs [20856 kg]
Width173.3 inches [440 cm]
Rear axle4.72 by 120 inches [119 by 3048 mm]

Minimum width over tires.

Ag front710/70R42
Ag rear710/70R42

Engine Specifications of John Deere, 9R 440

  • Liquid-cooled inline
  • Turbocharged aftercooled diesel
  • 6-cylinder 24-valve
StarterElectric
Torque RPM1550
Coolant capacity59.7 qts [56.5 L]
Rated Power (gross)434.5 hp [324.0 kW]
Starter volts12
Fuel systemElectronic high-pressure common rail
Air cleanerDry
Maximum Power (gross)477.4 hp [356.0 kW]
Displacement826.9 ci [13.6 L]
EmissionsTier IV
Bore/Stroke5.20x6.50 inches [132 x 165 mm]
Torque1498 lb-ft [2031.3 Nm]
Oil capacity67.6 qts [64.0 L]
Oil change500 h
Rated RPM2100
Compression15.9:1

Transmission Information of John Deere, 9R 440

Transmission variants 1

TransmissionE18
TypeFull power shift
Gears18 forward and 6 reverse

Mechanical Specs of John Deere, 9R 440

  • Four-wheel drive
  • Hydraulic wet disc brakes
  • Articulated power steering
  • Cab standard with air-conditioning.
Final drivesInboard planetary
Differential lockElectro-hydraulic front and rear

Power Information of John Deere, 9R 440

Rear PTOIndependent
Rear PTO Type1000 (1.75)

Hydraulics Specifications of John Deere, 9R 440

TypeClosed center pressure/flow compensated
Type(optional)110 gpm [416.4 lpm]
Pump flow55 gpm [208.2 lpm]
Pressure2900 psi [200.0 bar]
SCV flow35 gpm [132.5 lpm]
Valves4 to 8

Optional, 3/4 inch coupler

Three-Point Hitch of John Deere, 9R 440

Rear TypeIVN/IV
Rear lift (at 24"/610mm)15000 lbs [6804 kg]
Rear lift (at 24"/610mm)(optional)20000 lbs [9072 kg]

Electrical System of John Deere, 9R 440

GroundNegative
Batteries3
Batteries(optional)330
Charging systemAlternator
Battery volts12
Charging amps250

Where it sits

With 434 HP, the John Deere 9R 440 sits between 9420R (420 HP) and 9R 490 (482 HP) in John Deere's range. Its power puts it in the 93th percentile of 2020s models in our database (1464 machines).

Frequently asked questions

How much horsepower does the John Deere 9R 440 have?

The John Deere 9R 440 delivers 434 HP.

What years was the John Deere 9R 440 produced?

The John Deere 9R 440 was produced in 2021+.

What engine does the John Deere 9R 440 have?

The John Deere 9R 440 is powered by a Turbocharged aftercooled diesel, 6-cylinder 24-valve engine.

What transmission does the John Deere 9R 440 use?

The John Deere 9R 440 uses a E18 transmission.

How much does the John Deere 9R 440 weigh?

The John Deere 9R 440 weighs 62000 lbs [28123 kg].

Is the John Deere 9R 440 4WD?

The John Deere 9R 440 is available in 4WD.

Compare the John Deere 9R 440 with another model