John Deere 9510RT
Power
510 hp
Production
2012-2014
Engine
Turbocharged diesel, 6-cylinder 24-valve
Transmission
John Deere PowerShift
From the same series:
Introduction
Production Information of John Deere, 9510RT
The production information of the tractor (9510RT) includes details about its manufacturing.
| Original price was $428,960 in 2014 |
| Agricultural Crawler tractor |
| Built in Waterloo, Iowa, USA |
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, 9510RT
This section sums up the dimension and tires information of the tractor.
No data available
No data available
Engine Specifications of John Deere, 9510RT
Get the specifications for the engine and if different options are available.
| John Deere PowerTech PSX |
| Liquid-cooled inline |
| Turbocharged diesel |
| 6-cylinder 24-valve |
| Starter | Electric |
|---|---|
| Operating RPM | 1500-2100 |
| Emission control | Exhaust gas recirculation (EGR) |
| Starter volts | 12 |
| Rated Power (gross) | 510 hp [380.3 kW] |
| Cooling system | Variable ratio belt drive |
| Rated Power (net) | 490 hp [365.4 kW] |
| Displacement | 826.7 ci [13.5 L] |
| Emissions | Interim Tier 4 |
| Bore/Stroke | 5.197x6.496 inches [132 x 165 mm] |
| Idle RPM | 900-2200 |
| Oil capacity | 50.7 qts [48.0 L] |
| Coolant capacity | 58.2 qts [55.1 L] |
| Rated RPM | 2100 |
| Compression | 16:1 |
Transmission Information of John Deere, 9510RTY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | John Deere PowerShift |
|---|---|
| Clutch | Hydraulic wet disc |
| Type | Full power shift |
| Gears | 18 forward and 6 reverse |
Mechanical Specs of John Deere, 9510RTY
This section summarizes all mechanical information such as the brake system and other specifications.
| CommandView II cab standard with air-conditioning. |
| Hydraulic wet disc brakes |
| Drive | Crawler |
|---|---|
| Final drives | Outboard planetary |
| Steering | Hydrostatic power differential |
Power Information of John Deere, 9510RTY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent (optional) |
|---|---|
| Rear PTO Type | 1000 (1.75) |
Hydraulics Specifications of John Deere, 9510RT
Hydraulic system type, pressure, pump flow and valves.
| 45 gpm (19.1mm SCV) [170.3 lpm] | |
| Type | Closed center pressure flow compensated |
| 78 gpm (High-Flow) [295.2 lpm] | |
| Pump flow | 48 gpm [181.7 lpm] |
| Pressure | 2900 psi [200.0 bar] |
| SCV flow | 37 gpm [140.0 lpm] |
| Valves | 4 to 6 |
Three-Point Hitch of John Deere, 9510RT
Hitch category and rear/front lift capacity.
| Rear Type | 4N/4 |
|---|---|
| Drawbar | Category 5 wide-swing drawbar standard, rated to 4,581 kg. Optional heavy-duty kit rated to 5,440 kg. |
| 20,000 lbs (optional) [9072 kg] | |
| Control | Electronic draft sensing |
| Rear lift | 15,300 lbs [6940 kg] |
Electrical System of John Deere, 9510RT
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery CCA | 925 |
| Batteries | 3 |
| Charging system | Alternator |
| Battery volts | 12 |
| Charging amps | 200 |
Frequently asked questions
How much horsepower does the John Deere 9510RT have?
The John Deere 9510RT delivers 510 HP.
What years was the John Deere 9510RT produced?
The John Deere 9510RT was produced in 2012-2014.
What engine does the John Deere 9510RT have?
The John Deere 9510RT is powered by a Turbocharged diesel, 6-cylinder 24-valve engine.
What transmission does the John Deere 9510RT use?
The John Deere 9510RT uses a John Deere PowerShift transmission.