Landini 5-110H tractor

Landini 5-110H

Power

102 hp

Production

2010-2020

Engine

Turbocharged aftercooled diesel, 4-cylinder

Transmission

SPEED FOUR

Weight

8,030 lbs [3642 kg]

Drive

4WD

From the same series:

5-100H

Introduction

Production Information of Landini, 5-110H

The production information of the tractor (5-110H) includes details about its manufacturing.

ManufacturerLandini

Dimension and Tires Information of Landini, 5-110H

This section sums up the dimension and tires information of the tractor.

Ground clearance18.5 inches [46 cm]
Wheelbase92 inches [233 cm]
Height (cab)101 inches [256 cm]
Height (ROPS)100.5 inches [255 cm]
Length163.8 inches [416 cm]
Weight8,030 lbs [3642 kg]
Width83 inches [210 cm]
Ag front380/70R24
Ag rear480/70R34

Engine Specifications of Landini, 5-110H

Get the specifications for the engine and if different options are available.

Perkins 1104D-44TA
Liquid-cooled
Turbocharged aftercooled diesel
4-cylinder
EmissionsTier III
Displacement268.5 ci [4.4 L]
Power102 hp [76.1 kW]
Bore/Stroke4.13x5.00 inches [105 x 127 mm]
Starter typeElectric
Torque306.8 lb-ft [416.0 Nm]

Transmission Information of Landini, 5-110HY

Discover all variants of transmission available for this tractor model.

Transmission variants 1

Standard transmission. Three speeds with four ranges. Optional creeper range provides 16 speeds in each direction. Either with TECHNO mechanical shuttle, or TOP hydraulic shuttle.
TransmissionSPEED FOUR
TypePartial power shift with shuttle
Gears12 forward and reverse

Transmission variants 2

The T-Tronic adds a high-medium-low power shift to the basic transmission with hydraulic shuttle.
TransmissionTOP T-TRONIC
TypePartial power shift with hydraulic shuttle
Gears36 forward and 12 reverse

Transmission variants 3

Overdrive on the basic transmission.
TransmissionSPEED FOUR Overdrive
TypePartial power shift with shuttle
Gears24 forward and 12 reverse

Transmission variants 4

T-Tronic plus basic transmission with creeper increases available speeds.
TransmissionTOP T-TRONIC Creeper
TypePartial power shift with hydraulic shuttle
Gears48 forward and 16 reverse
12-speed partial power shift with shuttle
48-speed partial power shift with hydraulic shuttle
36-speed partial power shift with hydraulic shuttle
24-speed partial power shift with shuttle

Mechanical Specs of Landini, 5-110HY

This section summarizes all mechanical information such as the brake system and other specifications.

Four-wheel drive
Wet disc brakes
Powerfarm cab standard. Air-conditioning and pneumatic seat optional.

Power Information of Landini, 5-110HY

Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.

Rear PTOIndependent
Ground (optional)
540/750/1000 (optional)
Rear PTO Type540/750
540/1000 (optional)

Hydraulics Specifications of Landini, 5-110H

Hydraulic system type, pressure, pump flow and valves.

Valves2 to 4
Pump flow13.8 gpm [52.2 lpm]
Total flow21.6 gpm [81.8 lpm]

Three-Point Hitch of Landini, 5-110H

Hitch category and rear/front lift capacity.

Rear TypeII
Front lift3,960 lbs [1796 kg]
Rear lift9,570 lbs [4340 kg]
Front HitchII (optional)

Frequently asked questions

How much horsepower does the Landini 5-110H have?

The Landini 5-110H delivers 102 HP.

What years was the Landini 5-110H produced?

The Landini 5-110H was produced in 2010-2020.

What engine does the Landini 5-110H have?

The Landini 5-110H is powered by a Turbocharged aftercooled diesel, 4-cylinder engine.

What transmission does the Landini 5-110H use?

The Landini 5-110H uses a SPEED FOUR transmission.

How much does the Landini 5-110H weigh?

The Landini 5-110H weighs 8,030 lbs [3642 kg].

Is the Landini 5-110H 4WD?

The Landini 5-110H is available in 4WD.

Compare the Landini 5-110H with another model