Introduction
Production Information of Landini, Atlantis 80
The production information of the tractor (Atlantis 80) includes details about its manufacturing.
| Utility tractor |
| Manufacturer | Landini (a part of Argo) |
|---|
Dimension and Tires Information of Landini, Atlantis 80
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 93.7 inches [237 cm] |
|---|---|
| Height (ROPS) | 100.4 inches [255 cm] |
| Height (steering wheel) | 65.8 inches [167 cm] |
| Length | 164.2 inches [417 cm] |
| Weight | 7275 lbs [3299 kg] |
| Width | 72 inches*Minimum [182 cm] |
| 2WD Standard tires (ag) | Front: 9.00-16. Rear: 16.9R34 |
|---|---|
| 4WD Standard tires (ag) | Front: 13.6R24. Rear: 16.9R34 |
Engine Specifications of Landini, Atlantis 80
Get the specifications for the engine and if different options are available.
| Perkins 1004-42 |
| Liquid-cooled |
| Diesel |
| 4-cylinder |
| Torque RPM | 1400 |
|---|---|
| Displacement | 258.1 ci [4.2 L] |
| Power | 78 hp [58.2 kW] |
| Bore/Stroke | 4.055x5.00 inches [103 x 127 mm] |
| Starter volts | 12 |
| Starter | Electric |
| Torque | 209.5 lb-ft [284.1 Nm] |
| Rated RPM | 2200 |
| Emissions | Stage I |
Transmission Information of Landini, Atlantis 80Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Shuttle |
|---|---|
| Gears | 12 forward and reverse |
| Clutch | 279.4mm dry disc |
Transmission variants 2
| Type | Shuttle with creeper |
|---|---|
| Gears | 24 forward and 12 reverse |
Transmission variants 3
| Type | Shuttle with overdrive |
|---|---|
| Gears | 24 forward and 12 reverse |
| 12-speed shuttle |
| 24-speed shuttle with creeper |
| 24-speed shuttle with overdrive |
Mechanical Specs of Landini, Atlantis 80Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Two-post ROPS. |
| Wet disc brakes |
| Power steering |
| Differential lock | Electro-hydraulic front and rear |
|---|
Power Information of Landini, Atlantis 80Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| 540/1000 (1.375) | |
| Clutch | Mechanical dry disc |
| Rear PTO Type | 540/750 (1.375) |
Hydraulics Specifications of Landini, Atlantis 80
Hydraulic system type, pressure, pump flow and valves.
| Pressure | 2610 psi [180.0 bar] |
|---|---|
| Steering flow | 6.3 gpm [23.8 lpm] |
| Total flow | 20.6 gpm [78.0 lpm] |
| Valves | 2 |
| Pump flow | 14.2 gpm [53.7 lpm] |
Three-Point Hitch of Landini, Atlantis 80
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Rear lift | 5732 lbs [2600 kg] |
| 8157 lbsOptOptional [3700 kg] |
Electrical System of Landini, Atlantis 80
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Charging system | Alternator |
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Landini Atlantis 80 have?
The Landini Atlantis 80 delivers 78 HP.
What years was the Landini Atlantis 80 produced?
The Landini Atlantis 80 was produced in 2001-2003.
What engine does the Landini Atlantis 80 have?
The Landini Atlantis 80 is powered by a Diesel, 4-cylinder engine.
What transmission does the Landini Atlantis 80 use?
The Landini Atlantis 80 uses a Shuttle transmission.
How much does the Landini Atlantis 80 weigh?
The Landini Atlantis 80 weighs 7275 lbs [3299 kg].
Is the Landini Atlantis 80 4WD?
The Landini Atlantis 80 is available in 2WD/4WD.