Introduction
Production Information of Lanz, 500
The production information of the tractor (500) includes details about its manufacturing.
| Built in Mannheim, Baden-Württemberg, Germany |
| Manufacturer | Lanz (a part of John Deere) |
|---|
Dimension and Tires Information of Lanz, 500
This section sums up the dimension and tires information of the tractor.
| Ground clearance | 15.1 inches [38 cm] |
|---|---|
| Wheelbase | 74.2 inches [188 cm] |
| Height (hood) | 64.1 inches [162 cm] |
| Height (steering wheel) | 61 inches [154 cm] |
| Length | 130.9 inches [332 cm] |
| Front tread | 50 to 59.7 inches [127 to 151 cm] |
| Shipping weight | 4550 lbs [2063 kg] |
| Width | 61.1 inches [155 cm] |
| Rear tread | 49.2 to 59.1 inches [124 to 150 cm] |
| Ag front | 6.00-16 |
|---|---|
| Ag rear | 9-32 |
| Ag rear | 11-28 |
| Ag front | 6.50-16 |
Engine Specifications of Lanz, 500
Get the specifications for the engine and if different options are available.
| John Deere 402 |
| The Deere-Lanz 500 used the same diesel engine as the Deere 1010 |
| Liquid-cooled |
| Diesel |
| 4-cylinder |
| Starter volts | 12 |
|---|---|
| Power | 42 hp [31.3 kW] |
| Displacement | 144.5 ci [2.4 L] |
| Coolant capacity | 12.7 qts [12.0 L] |
| Oil capacity | 4.8 qts [4.5 L] |
| Firing order | 1-3-4-2 |
| Rated RPM | 2500 |
| Bore/Stroke | 3.625x3.50 inches [92 x 89 mm] |
Transmission Information of Lanz, 500Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four gears in three ranges, plu sreverse range. |
| Type | Gear |
|---|---|
| Gears | 10 forward and 3 reverse |
Mechanical Specs of Lanz, 500Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station. |
| Manual steering |
| Disc brakes |
Power Information of Lanz, 500Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO Type | 540/1000 |
|---|---|
| Mid PTO Type | 1000 |
| Mid PTO | Standard |
| Engine RPM | 540@2250 |
| 1000@2380 |
Three-Point Hitch of Lanz, 500
Hitch category and rear/front lift capacity.
| Rear Type | II/I |
|---|
Frequently asked questions
How much horsepower does the Lanz 500 have?
The Lanz 500 delivers 42 HP.
What years was the Lanz 500 produced?
The Lanz 500 was produced in 1960-1966.
What engine does the Lanz 500 have?
The Lanz 500 is powered by a The Deere-Lanz 500 used the same diesel engine as the Deere 1010, 4-cylinder engine.
What transmission does the Lanz 500 use?
The Lanz 500 uses a Gear transmission.
How much does the Lanz 500 weigh?
The Lanz 500 weighs 4550 lbs [2063 kg].
Is the Lanz 500 4WD?
The Lanz 500 is available in 2WD.