Introduction
Production Information of Lanz, 700
The production information of the tractor (700) includes details about its manufacturing.
| Built in Mannheim, Baden-Württemberg, Germany |
| Manufacturer | Lanz (a part of John Deere) |
|---|
Dimension and Tires Information of Lanz, 700
This section sums up the dimension and tires information of the tractor.
| Front tread | 49.2 to 72.8 inches [124 to 184 cm] |
|---|---|
| Wheelbase | 76.8 inches [195 cm] |
| Height (hood) | 54.9 inches [139 cm] |
| Height (steering wheel) | 62.6 inches [159 cm] |
| Length | 133.5 inches [339 cm] |
| Rear tread | 53.2 to 59.1 inches [135 to 150 cm] |
| Shipping weight | 4775 lbs [2165 kg] |
| Width | 65 inches*Minimum [165 cm] |
| Ag front | 6.00-16 |
|---|---|
| 9-36 | |
| 11-28 | |
| Ag rear | 11-32 |
| 13-28 | |
| Ag rear | 9-32 |
Engine Specifications of Lanz, 700
Get the specifications for the engine and if different options are available.
| John Deere |
| Liquid-cooled |
| Diesel |
| 4-cylinder |
| Oil capacity | 5.8 qts [5.5 L] |
|---|---|
| Displacement | 165.1 ci [2.7 L] |
| Rated RPM | 2400 |
| Bore/Stroke | 3.875x3.50 inches [98 x 89 mm] |
| Coolant capacity | 12.15 qts [11.5 L] |
| Starter volts | 12 |
| Firing order | 1-3-4-2 |
| Power | 53 hp [39.5 kW] |
Transmission Information of Lanz, 700Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four gears (1-4) in three ranges (I, II, III) plus reverse range. Speeds in fourth gear are the same across all three forward ranges. |
| Type | Constant mesh |
|---|---|
| Gears | 10 forward and 3 reverse |
| Oil capacity | 32.8 qts [31.0 L] |
Mechanical Specs of Lanz, 700Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station. |
| Manual steering |
| Disc brakes |
Power Information of Lanz, 700Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO Type | 540/1000 |
|---|---|
| Mid PTO Type | 1000 |
| Mid PTO | Standard |
| Engine RPM | 540@2250 |
| 1000@2380 |
Hydraulics Specifications of Lanz, 700
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Pressure | 2200 psi [151.7 bar] |
| Pump flow | 4.2 gpm [15.9 lpm] |
Three-Point Hitch of Lanz, 700
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Rear lift | 1764 lbs [800 kg] |
Frequently asked questions
How much horsepower does the Lanz 700 have?
The Lanz 700 delivers 53 HP.
What years was the Lanz 700 produced?
The Lanz 700 was produced in 1962-1966.
What engine does the Lanz 700 have?
The Lanz 700 is powered by a Diesel, 4-cylinder engine.
What transmission does the Lanz 700 use?
The Lanz 700 uses a Constant mesh transmission.
How much does the Lanz 700 weigh?
The Lanz 700 weighs 4775 lbs [2165 kg].
Is the Lanz 700 4WD?
The Lanz 700 is available in 2WD.