Massey Ferguson 1020 tractor

Massey Ferguson 1020

Power

21 hp

Production

1983-1994

Engine

Diesel, 3-cylinder

Transmission

Gear

Weight

1896 lbs [860 kg]

Drive

2WD/4WD

From the same series:

1010
1030

Introduction

Production Information of Massey Ferguson, 1020

The production information of the tractor (1020) includes details about its manufacturing.

Original price was $9,700 in 1994
Built in Japan
Compact Utility tractor
DistributorMassey Ferguson
ManufacturerToyosha

Dimension and Tires Information of Massey Ferguson, 1020

This section sums up the dimension and tires information of the tractor.

4WD Ground clearance11.6 inches [29 cm]
Gear Wheelbase56.7 inches [144 cm]
2WD Width45.5 inches [115 cm]
Hydro Length114 inches [289 cm]
Hydro Wheelbase59.1 inches [150 cm]
2WD gear Shipping weight1896 lbs [860 kg]
4WD Width47 inches [119 cm]
Gear Length94.5 inches [240 cm]
2WD Ground clearance13.6 inches [34 cm]
4WD hydro Shipping weight2723 lbs [1235 kg]
Height (steering wheel)52.9 inches [134 cm]
2WD Standard tires (ag)Front: 4.00x12. Rear: 8.3x24
Lawn/turf rear13.6x16
4WD Lawn/turf front25x8.50-14
4WD Standard tires (ag)Front: 6x14. Rear: 8.3x24
2WD Lawn/turf front24x8.50-12

Engine Specifications of Massey Ferguson, 1020

Get the specifications for the engine and if different options are available.

Toyosha CS-112
Liquid-cooled
3-cylinder
Diesel
Coolant capacity4.4 qts [4.2 L]
Oil capacity2.3 qts [2.2 L]
Fuel systemIndirect injection
Compression23:1
Pre-heatingGlow plugs
Displacement68.7 ci [1.1 L]
Power21 hp [15.7 kW]
Air cleanerSingle dry element
Bore/Stroke2.953x3.347 inches [75 x 85 mm]
Starter volts12
Firing order1-3-2
Rated RPM2350

Transmission Information of Massey Ferguson, 1020Y

Discover all variants of transmission available for this tractor model.

Transmission variants 1

Three speeds with high and low ranges and fast and slow modes.
TypeGear
Oil capacity18 qts [17.0 L]
Gears12 forward and 4 reverse
Clutch198mm dry disc

Transmission variants 2

TypeHydrostatic
GearsInfinite forward and reverse
Oil capacity27.6 qts [26.1 L]
12-speed gear
Hydrostatic

Mechanical Specs of Massey Ferguson, 1020Y

This section summarizes all mechanical information such as the brake system and other specifications.

Two- or four-wheel drive
Two-post ROPS.
Differential mechanical drum brakes
SteeringManual

Power Information of Massey Ferguson, 1020Y

Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.

Gear Rear PTOTransmission
Front PTOIndependent (optional)
Mid PTO Type2226 (with hydro)
Hydro Rear PTOLive
ClutchElectric
Rear PTO Type540 (1.375)

Hydraulics Specifications of Massey Ferguson, 1020

Hydraulic system type, pressure, pump flow and valves.

TypeOpen center
Pump flow5.1 gpm [19.3 lpm]

Three-Point Hitch of Massey Ferguson, 1020

Hitch category and rear/front lift capacity.

Rear TypeI
Gear Rear lift (at ends)1543 lbs [699 kg]
Hydro Rear lift (at ends)1697 lbs [769 kg]

Electrical System of Massey Ferguson, 1020

Battery voltage, charging system and ground.

GroundNegative
Battery volts12

Frequently asked questions

How much horsepower does the Massey Ferguson 1020 have?

The Massey Ferguson 1020 delivers 21 HP.

What years was the Massey Ferguson 1020 produced?

The Massey Ferguson 1020 was produced in 1983-1994.

What engine does the Massey Ferguson 1020 have?

The Massey Ferguson 1020 is powered by a Diesel, 3-cylinder engine.

What transmission does the Massey Ferguson 1020 use?

The Massey Ferguson 1020 uses a Gear transmission.

How much does the Massey Ferguson 1020 weigh?

The Massey Ferguson 1020 weighs 1896 lbs [860 kg].

Is the Massey Ferguson 1020 4WD?

The Massey Ferguson 1020 is available in 2WD/4WD.

Compare the Massey Ferguson 1020 with another model