
Massey Ferguson GC1705
Power
22 hp
Production
2013-2018
Engine
Diesel, 3-cylinder
Transmission
Hydrostatic
Weight
1433 lbs [650 kg]
Drive
4WD
From the same series:
Introduction
Production Information of Massey Ferguson, GC1705
The production information of the tractor (GC1705) includes details about its manufacturing.
| Original price was $10,834 in 2013 |
| Sub-Compact Utility tractor |
| Distributor | Massey Ferguson |
|---|---|
| Manufacturer | Iseki |
Dimension and Tires Information of Massey Ferguson, GC1705
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 57.1 inches [145 cm] |
|---|---|
| Shipping weight | 1433 lbs [650 kg] |
| Height (ROPS) | 72.8 inches [184 cm] |
| Length | 97.6 inches [247 cm] |
| Ground clearance | 6.7 inches [17 cm] |
| Width | 47.25 inches [120 cm] |
| Ag front | 18x8.50-10 |
|---|---|
| Industrial front | 18x8.50-10 |
| Lawn/turf rear | 26x12.00-12 |
| Ag rear | 26x12.00-12 |
| Industrial rear | 26x12.00-12 |
| Lawn/turf front | 18x8.50-10 |
Engine Specifications of Massey Ferguson, GC1705
Get the specifications for the engine and if different options are available.
| Iseki |
| Liquid-cooled |
| Diesel |
| 3-cylinder |
| Power (gross) | 22.5 hp [16.8 kW] |
|---|---|
| Displacement | 68.5 ci [1.1 L] |
| Rated RPM | 2600 |
| Bore/Stroke | 3.08x3.07 inches [78 x 78 mm] |
| Starter volts | 12 |
| Starter | Electric |
Transmission Information of Massey Ferguson, GC1705Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Hydrostatic |
|---|---|
| Gears | Infinite forward and reverse (2-range) |
Mechanical Specs of Massey Ferguson, GC1705Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Two-post folding ROPS. |
| Wet disc brakes |
| Steering | Hydrostatic power |
|---|
Power Information of Massey Ferguson, GC1705Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Mid PTO Type | 2000 |
| Rear PTO Type | 540 |
| Mid PTO | Independent |
Hydraulics Specifications of Massey Ferguson, GC1705
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Steering flow | 2 gpm [7.6 lpm] |
| SCV flow | 4.3 gpm [16.3 lpm] |
| Total flow | 6.3 gpm [23.8 lpm] |
Three-Point Hitch of Massey Ferguson, GC1705
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Rear lift (at ends) | 1190 lbs [539 kg] |
Electrical System of Massey Ferguson, GC1705
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Massey Ferguson GC1705 have?
The Massey Ferguson GC1705 delivers 22 HP.
What years was the Massey Ferguson GC1705 produced?
The Massey Ferguson GC1705 was produced in 2013-2018.
What engine does the Massey Ferguson GC1705 have?
The Massey Ferguson GC1705 is powered by a Diesel, 3-cylinder engine.
What transmission does the Massey Ferguson GC1705 use?
The Massey Ferguson GC1705 uses a Hydrostatic transmission.
How much does the Massey Ferguson GC1705 weigh?
The Massey Ferguson GC1705 weighs 1433 lbs [650 kg].
Is the Massey Ferguson GC1705 4WD?
The Massey Ferguson GC1705 is available in 4WD.