Introduction
Production Information of Massey Ferguson, 174
The production information of the tractor (174) includes details about its manufacturing.
| Built in Italy |
| Utility tractor |
| Distributor | Massey Ferguson |
|---|---|
| Manufacturer | Landini |
Dimension and Tires Information of Massey Ferguson, 174
This section sums up the dimension and tires information of the tractor.
| Rear tread | 47.2 to 74.8 inches [119 to 189 cm] |
|---|---|
| Wheelbase | 87 inches [220 cm] |
| Clearance (front axle) | 19.7 inches [50 cm] |
| Weight | 4872 lbs [2209 kg] |
| Length | 142.3 inches [361 cm] |
| Front tread | 55.9 to 75.6 inches [141 to 192 cm] |
| Width | 62 inches*Minimum width [157 cm] |
| Standard tires (ag) | Front: 6.50-16. Rear: 14.9/13-30 |
|---|---|
| Optional tires (ag) | Front: 7.50-16. Rear: 14.9/13-30 |
| Front: 7.50-16. Rear: 12.4/11-36 |
Engine Specifications of Massey Ferguson, 174
Get the specifications for the engine and if different options are available.
| Perkins A4.236 |
| Liquid-cooled |
| Diesel |
| 4-cylinder |
| Starter | Electric |
|---|---|
| Firing order | 1-3-4-2 |
| Intake valve clearance | 0.012 inches (cold) [0.305 mm] |
| Fuel system | Direct injection |
| Starter volts | 12 |
| Exhaust valve clearance | 0.012 inches (cold) [0.305 mm] |
| Compression | 16:1 |
| Rated RPM | 2200 |
| Air cleaner | Oil bath |
| Displacement | 235.8 ci [3.9 L] |
| Power | 65 hp [48.5 kW] |
| Bore/Stroke | 3.875x5.00 inches [98 x 127 mm] |
| Torque RPM | 1400 |
| Oil capacity | 9.6 qts [9.1 L] |
| Coolant capacity | 15.9 qts [15.0 L] |
| Torque | 179.3 lb-ft [243.1 Nm] |
| Idle RPM | 650-2410 |
Transmission Information of Massey Ferguson, 174Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four synchronized gears in three ranges, plus reverse range. Tractor must be stopped, and clutch used, to shift range. |
| Type | Partially synchronized |
|---|---|
| Oil capacity | 22.2 qts [21.0 L] |
| Gears | 12 forward and 4 reverse |
| Clutch | 279.4mm dry disc |
Mechanical Specs of Massey Ferguson, 174Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Dry disc brakes |
| Open operator station. Cab optional. |
| Hydrostatic power | |
| Differential lock | Mechanical rear |
| Steering | Mechanical |
Power Information of Massey Ferguson, 174Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Engine RPM | 540@1944 |
| 540/1000 (1.375)OptOptional | |
| Clutch | Dry disc |
| 1000@1916 | |
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of Massey Ferguson, 174
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Pump flow | 7.4 gpm [28.0 lpm] |
| Capacity | 5.5 gal [20.8 L] |
| Pressure | 2418 psi [166.7 bar] |
Three-Point Hitch of Massey Ferguson, 174
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Control | Position and draft control |
| Rear lift (at ends) | 5842 lbs [2649 kg] |
Electrical System of Massey Ferguson, 174
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery AH | 92 |
Frequently asked questions
How much horsepower does the Massey Ferguson 174 have?
The Massey Ferguson 174 delivers 65 HP.
What years was the Massey Ferguson 174 produced?
The Massey Ferguson 174 was produced in 1973-1983.
What engine does the Massey Ferguson 174 have?
The Massey Ferguson 174 is powered by a Diesel, 4-cylinder engine.
What transmission does the Massey Ferguson 174 use?
The Massey Ferguson 174 uses a Partially synchronized transmission.
How much does the Massey Ferguson 174 weigh?
The Massey Ferguson 174 weighs 4872 lbs [2209 kg].
Is the Massey Ferguson 174 4WD?
The Massey Ferguson 174 is available in 2WD.