Introduction
Production Information of Massey Ferguson, 174-4
The production information of the tractor (174-4) includes details about its manufacturing.
| Built in Italy |
| Utility tractor |
| Distributor | Massey Ferguson |
|---|---|
| Manufacturer | Landini |
Dimension and Tires Information of Massey Ferguson, 174-4
This section sums up the dimension and tires information of the tractor.
| Rear tread | 47.2 to 74.8 inches [119 to 189 cm] |
|---|---|
| Wheelbase | 85.8 inches [217 cm] |
| Clearance (front axle) | 14.1 inches [35 cm] |
| Weight | 5490 lbs [2490 kg] |
| Length | 146.7 inches [372 cm] |
| Front tread | 59.2 inches [150 cm] |
| Width | 62 inches*Minimum width [157 cm] |
| Standard tires (ag) | Front: 9.5/9-24. Rear: 14.9/13-30 |
|---|---|
| Optional tires (ag) | Front: 8.3/8-24. Rear: 14.9/13-28 |
| Front: 11.2/10-24. Rear: 12.4-11-36 |
Engine Specifications of Massey Ferguson, 174-4
Get the specifications for the engine and if different options are available.
| Perkins A4.236 |
| Liquid-cooled |
| Diesel |
| 4-cylinder |
| Starter | Electric |
|---|---|
| Firing order | 1-3-4-2 |
| Intake valve clearance | 0.012 inches (cold) [0.305 mm] |
| Fuel system | Direct injection |
| Starter volts | 12 |
| Exhaust valve clearance | 0.012 inches (cold) [0.305 mm] |
| Compression | 16:1 |
| Rated RPM | 2200 |
| Air cleaner | Oil bath |
| Displacement | 235.8 ci [3.9 L] |
| Power | 65 hp [48.5 kW] |
| Bore/Stroke | 3.875x5.00 inches [98 x 127 mm] |
| Torque RPM | 1400 |
| Oil capacity | 9.6 qts [9.1 L] |
| Coolant capacity | 15.9 qts [15.0 L] |
| Torque | 179.3 lb-ft [243.1 Nm] |
| Idle RPM | 650-2410 |
Transmission Information of Massey Ferguson, 174-4Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four synchronized gears in three ranges, plus reverse range. Tractor must be stopped, and clutch used, to shift range. |
| Type | Partially synchronized |
|---|---|
| Oil capacity | 22.2 qts [21.0 L] |
| Gears | 12 forward and 4 reverse |
| Clutch | 279.4mm dry disc |
Mechanical Specs of Massey Ferguson, 174-4Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Open operator station. Cab optional. |
| Dry disc brakes |
| Power steering |
| Differential lock | Mechanical rear |
|---|
Power Information of Massey Ferguson, 174-4Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Engine RPM | 540@1944 |
| 540/1000 (1.375)OptOptional | |
| Clutch | Dry disc |
| 1000@1916 | |
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of Massey Ferguson, 174-4
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Pump flow | 7.4 gpm [28.0 lpm] |
| Capacity | 5.5 gal [20.8 L] |
| Pressure | 2418 psi [166.7 bar] |
Three-Point Hitch of Massey Ferguson, 174-4
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Control | Position and draft control |
| Rear lift (at ends) | 5842 lbs [2649 kg] |
Electrical System of Massey Ferguson, 174-4
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery AH | 92 |
Frequently asked questions
How much horsepower does the Massey Ferguson 174-4 have?
The Massey Ferguson 174-4 delivers 65 HP.
What years was the Massey Ferguson 174-4 produced?
The Massey Ferguson 174-4 was produced in 1973-1983.
What engine does the Massey Ferguson 174-4 have?
The Massey Ferguson 174-4 is powered by a Diesel, 4-cylinder engine.
What transmission does the Massey Ferguson 174-4 use?
The Massey Ferguson 174-4 uses a Partially synchronized transmission.
How much does the Massey Ferguson 174-4 weigh?
The Massey Ferguson 174-4 weighs 5490 lbs [2490 kg].
Is the Massey Ferguson 174-4 4WD?
The Massey Ferguson 174-4 is available in 4WD.