Massey Ferguson 2680
Power
130 hp
Production
1981-1985
Engine
Turbocharged diesel, 6-cylinder
Transmission
Two-speed power shift
Weight
12610 lbs [5719 kg]
Drive
2WD/4WD
From the same series:
Introduction
Production Information of Massey Ferguson, 2680
The production information of the tractor (2680) includes details about its manufacturing.
| Row-Crop tractor |
| Manufacturer | Massey Ferguson |
|---|
Dimension and Tires Information of Massey Ferguson, 2680
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 107.3 inches [272 cm] |
|---|---|
| Weight | 12610 lbs [5719 kg] |
| Length | 200.4 inches [509 cm] |
| Height (cab) | 111.6 inches [283 cm] |
| 2WD Standard tires (ag) | Front: 11.00-16. Rear: 18.4-38 |
|---|---|
| 4WD Standard tires (ag) | Front: 13.6-28. Rear: 18.4-38 |
Engine Specifications of Massey Ferguson, 2680
Get the specifications for the engine and if different options are available.
| Perkins AT6.354.4 |
| Liquid-cooled |
| Turbocharged diesel |
| 6-cylinder |
| Starter volts | 12 |
|---|---|
| Starter | Electric |
| Fuel system | Direct injection |
| Oil capacity | 21.7 qts [20.5 L] |
| Pre-heating | Thermostart |
| Compression | 16:1 |
| Air cleaner | Dry |
| Displacement | 353.8 ci [5.8 L] |
| Power | 130 hp [96.9 kW] |
| Bore/Stroke | 3.875x5.00 inches [98 x 127 mm] |
| Torque RPM | 1600 |
| Coolant capacity | 28.5 qts [27.0 L] |
| Torque | 320.8 lb-ft [435.0 Nm] |
| Rated RPM | 2400 |
Transmission Information of Massey Ferguson, 2680Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Two-speed power shift |
|---|---|
| Oil capacity | 89.8 qts [85.0 L] |
| Gears | 16 forward and 12 reverse |
| Clutch | 355mm dry disc |
Mechanical Specs of Massey Ferguson, 2680Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Cab standard. |
| Power steering |
| Hydraulic wet disc brakes |
Power Information of Massey Ferguson, 2680Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| 1000@2090 | |
| Rear PTO Type | 540/1000 (1.375) |
| Engine RPM | 540@1990 |
Hydraulics Specifications of Massey Ferguson, 2680
Hydraulic system type, pressure, pump flow and valves.
| Pressure | 2292 psi [158.0 bar] |
|---|---|
| Pump flow | 14.1 gpm [53.4 lpm] |
| Steering flow | 5.7 gpm [21.6 lpm] |
Three-Point Hitch of Massey Ferguson, 2680
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Control | Position and draft control |
| Rear lift | 9921 lbs [4500 kg] |
Electrical System of Massey Ferguson, 2680
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery AH | 105 |
| Batteries | 2 |
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Massey Ferguson 2680 have?
The Massey Ferguson 2680 delivers 130 HP.
What years was the Massey Ferguson 2680 produced?
The Massey Ferguson 2680 was produced in 1981-1985.
What engine does the Massey Ferguson 2680 have?
The Massey Ferguson 2680 is powered by a Turbocharged diesel, 6-cylinder engine.
What transmission does the Massey Ferguson 2680 use?
The Massey Ferguson 2680 uses a Two-speed power shift transmission.
How much does the Massey Ferguson 2680 weigh?
The Massey Ferguson 2680 weighs 12610 lbs [5719 kg].
Is the Massey Ferguson 2680 4WD?
The Massey Ferguson 2680 is available in 2WD/4WD.