Massey Ferguson 2640 tractor

Massey Ferguson 2640

Power

110 hp

Production

1980-1985

Engine

Diesel, 6-cylinder

Transmission

Two-speed power shift

Drive

2WD/4WD

From the same series:

2620
2680

Introduction

Production Information of Massey Ferguson, 2640

The production information of the tractor (2640) includes details about its manufacturing.

Original price was $38,000 in 1983
Row-Crop tractor
Built in Beauvais, France
ManufacturerMassey Ferguson

Dimension and Tires Information of Massey Ferguson, 2640

This section sums up the dimension and tires information of the tractor.

2WD Front tread62 to 85 inches [157 to 215 cm]
2WD Wheelbase105 inches [266 cm]
Height (cab)112 inches [284 cm]
Width84 inches [213 cm]
4WD Wheelbase107.3 inches [272 cm]
4WD Front tread63 to 81 inches [160 to 205 cm]
Ground clearance19 inches [48 cm]
Length204 inches [518 cm]
Rear tread60 to 84 inches [152 to 213 cm]
2WD Standard tires (ag)Front: 10.00-16. Rear: 18.4-38
4WD Standard tires (ag)Front: 14.9-28. Rear: 18.4-38

Engine Specifications of Massey Ferguson, 2640

Get the specifications for the engine and if different options are available.

Perkins A6.354.4
Liquid-cooled
Diesel
6-cylinder
Firing order1-5-3-6-2-4
Torque RPM1450
Coolant capacity28.5 qts [27.0 L]
Fuel systemDirect injection
StarterElectric
Pre-heatingEther injection
Compression16:1
Air cleanerDry
Displacement353.8 ci [5.8 L]
Power110 hp [82.0 kW]
Bore/Stroke3.875x5.00 inches [98 x 127 mm]
Torque270.7 lb-ft [367.1 Nm]
Starter volts12
Oil capacity20.1 qts [19.0 L]
Idle RPM950-2750
Rated RPM2400

Transmission Information of Massey Ferguson, 2640Y

Discover all variants of transmission available for this tractor model.

Transmission variants 1

Eight gears with two-speed power shift and mechanical shuttle. Gear sets 1-4 and 5-8 are synchronized.
TypeTwo-speed power shift
Oil capacity89.8 qts [85.0 L]
Gears16 forward and 12 reverse
Clutch355mm dry disc

Mechanical Specs of Massey Ferguson, 2640Y

This section summarizes all mechanical information such as the brake system and other specifications.

Two- or four-wheel drive
Hydraulic wet disc brakes
Power steering
Cab standard with air-conditioning.
Final drivesInboard planetary
Differential lockHydraulic

Power Information of Massey Ferguson, 2640Y

Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.

Rear PTOIndependent
Engine RPM540@1900
1000 (1.375)
ClutchHydraulic disc
1000@2090
Rear PTO Type540 (1.375)

Hydraulics Specifications of Massey Ferguson, 2640

Hydraulic system type, pressure, pump flow and valves.

TypeOpen center
Steering flow14.5 gpm [54.9 lpm]
Total flow34.8 gpm [131.7 lpm]
Valves2 or 3
Pump flow15 gpm [56.8 lpm]

Three-Point Hitch of Massey Ferguson, 2640

Hitch category and rear/front lift capacity.

Rear TypeII
Rear lift (at 24"/610mm)7600 lbs [3447 kg]
ControlPosition and draft control
Rear lift (at ends)9921 lbs [4500 kg]

Electrical System of Massey Ferguson, 2640

Battery voltage, charging system and ground.

GroundNegative
Battery AH85
Battery volts12
Charging systemAlternator
Batteries2

Frequently asked questions

How much horsepower does the Massey Ferguson 2640 have?

The Massey Ferguson 2640 delivers 110 HP.

What years was the Massey Ferguson 2640 produced?

The Massey Ferguson 2640 was produced in 1980-1985.

What engine does the Massey Ferguson 2640 have?

The Massey Ferguson 2640 is powered by a Diesel, 6-cylinder engine.

What transmission does the Massey Ferguson 2640 use?

The Massey Ferguson 2640 uses a Two-speed power shift transmission.

Is the Massey Ferguson 2640 4WD?

The Massey Ferguson 2640 is available in 2WD/4WD.

Compare the Massey Ferguson 2640 with another model