
Massey Ferguson 4292
Power
110 hp
Production
2010-2020
Engine
Turbocharged diesel, 4-cylinder
Transmission
Synchromesh
Weight
14815 lbs [6720 kg]
Drive
2WD/4WD
From the same series:
Introduction
Production Information of Massey Ferguson, 4292
The production information of the tractor (4292) includes details about its manufacturing.
| Row-Crop tractor |
| Built in Canoas, Brazil |
| Manufacturer | Massey Ferguson (a part of AGCO) |
|---|
Dimension and Tires Information of Massey Ferguson, 4292
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 102.8 inches [261 cm] |
|---|---|
| Ground clearance | 15.8 inches [40 cm] |
| Weight | 14815 lbs [6720 kg] |
| Length | 168.1 inches [426 cm] |
| Rear tread | 61.4 to 85.2 inches [155 to 216 cm] |
| Height | 102.4 inches [260 cm] |
| Standard tires (ag) | Front: 14.9-24. Rear: 18.4-34 |
|---|
Engine Specifications of Massey Ferguson, 4292
Get the specifications for the engine and if different options are available.
| AGCO Power 420DS |
| Liquid-cooled inline |
| Turbocharged diesel |
| 4-cylinder |
| Starter | Electric |
|---|---|
| Displacement | 268.4 ci [4.4 L] |
| Rated RPM | 2200 |
| Bore/Stroke | 4.25x4.72 inches [108 x 120 mm] |
| Oil capacity | 9.5 qts [9.0 L] |
| Starter volts | 12 |
| Torque RPM | 1400 |
| Torque | 317 lb-ft [429.9 Nm] |
| Power | 110 hp [82.0 kW] |
Transmission Information of Massey Ferguson, 4292Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Synchromesh |
|---|---|
| Gears | 12 forward and 4 reverse |
| Clutch | Dry disc |
Mechanical Specs of Massey Ferguson, 4292Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Hydraulic wet disc brakes |
| Power steering |
| Two-post fixed ROPS. Cab optional. |
| Final drives | Planetary |
|---|---|
| Differential lock | Mechanical rear |
Power Information of Massey Ferguson, 4292Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| 1000@1900 | |
| Engine RPM | 540@1900 |
| Clutch | Dry disc |
| Rear PTO Type | 540/1000 (1.375) |
Hydraulics Specifications of Massey Ferguson, 4292
Hydraulic system type, pressure, pump flow and valves.
| Capacity | 12.2 gal [46.2 L] |
|---|---|
| 19.8 gpmOptOptional [74.9 lpm] | |
| Pump flow | 17.7 gpm [67.0 lpm] |
| Pressure | 2466 psi [170.0 bar] |
| Valves | 2 or 3 |
Three-Point Hitch of Massey Ferguson, 4292
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|
Electrical System of Massey Ferguson, 4292
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Cab Charging amps | 120 |
| Charging system | Alternator |
| ROPS Charging amps | 55 |
Frequently asked questions
How much horsepower does the Massey Ferguson 4292 have?
The Massey Ferguson 4292 delivers 110 HP.
What years was the Massey Ferguson 4292 produced?
The Massey Ferguson 4292 was produced in 2010-2020.
What engine does the Massey Ferguson 4292 have?
The Massey Ferguson 4292 is powered by a Turbocharged diesel, 4-cylinder engine.
What transmission does the Massey Ferguson 4292 use?
The Massey Ferguson 4292 uses a Synchromesh transmission.
How much does the Massey Ferguson 4292 weigh?
The Massey Ferguson 4292 weighs 14815 lbs [6720 kg].
Is the Massey Ferguson 4292 4WD?
The Massey Ferguson 4292 is available in 2WD/4WD.