Massey Ferguson 2675 tractor

Massey Ferguson 2675

Power

111 hp[P] hp

Production

1978-1983

Engine

Diesel, 6-cylinder

Transmission

Multi-Power

Drive

2WD

From the same series:

2705

Introduction

Production Information of Massey Ferguson, 2675

The production information of the tractor (2675) includes details about its manufacturing.

Row-Crop tractor
Original price was $37,000 in 1983
ManufacturerMassey Ferguson

Dimension and Tires Information of Massey Ferguson, 2675

This section sums up the dimension and tires information of the tractor.

Rear tread60 to 97 inches [152 to 246 cm (PAVT standard)]
Wheelbase105.4 inches [267 cm]
Clearance (front axle)23.8 inches [60 cm]
118.1 inches (long axle) [299 cm]
Length177 inches [449 cm]
Front tread60 to 80 inches [152 to 203 cm]
Clearance (drawbar)15.6 inches [39 cm]
Width94.1 inches (standard axle) [239 cm]
Rear tread60 to 121 inches [152 to 307 cm (PAVT long)]
Rear tread69 to 119 inches [175 to 302 cm (long)]
Rear tread69 to 95 inches [175 to 241 cm (standard)]
Front tread70 to 90 inches [177 to 228 cm (wide axle)]
Rear axle3.25 inch diameter [82 mm]
20.8-38
Ag front9.5L-15
Ag rear16.9-38
14L-16.1
10.00-16
23.1-34
18.4-38
11.00-16
30.5-32
24.5-32

Engine Specifications of Massey Ferguson, 2675

Get the specifications for the engine and if different options are available.

Perkins A6.3544
Liquid-cooled
6-cylinder
Diesel
Air cleanerDual dry element
StarterElectric
Displacement354 ci [5.8 L]
Bore/Stroke3.875x5.00 inches [98 x 127 mm]
Fuel systemDirect injection
Rated RPM2500
Compression16:1
Coolant capacity31 qts [29.3 L]
Oil capacity18 qts [17.0 L]
Starter volts12

Transmission Information of Massey Ferguson, 2675Y

Discover all variants of transmission available for this tractor model.

Transmission variants 1

Eight forward gears with three power shift speeds in each gear.
TransmissionMulti-Power
Oil capacity120 qts [113.6 L]
Clutch356mm cerametallic dry disc
Type3-speed power shift
Gears24 forward and 6 reverse

Transmission variants 2

TypeMechanical shuttle
Gears8 forward and 6 reverse
Clutch356mm cerametallic dry disc
24-speed 3-speed power shift
8-speed mechanical shuttle

Mechanical Specs of Massey Ferguson, 2675Y

This section summarizes all mechanical information such as the brake system and other specifications.

Two-wheel drive
Cab standard with air-conditioning. Available platform configuration with four-post ROPS.
Hydraulic wet disc brakes
Final drivesPlanetary
SteeringHydrostatic power

Power Information of Massey Ferguson, 2675Y

Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.

Rear PTOIndependent
1000@2090
Engine RPM540@1990
ClutchHydraulic
Rear PTO Type540/1000 (1.375)

Hydraulics Specifications of Massey Ferguson, 2675

Hydraulic system type, pressure, pump flow and valves.

TypeOpen center
16.5 gpm*Auxiliary high-pressure [62.5 lpm]
6.4 gpm*Low-pressure [24.2 lpm]
Valves2 or 3
Pump flow16.5 gpm*High-pressure [62.5 lpm]

Three-Point Hitch of Massey Ferguson, 2675

Hitch category and rear/front lift capacity.

Rear TypeII
ControlPosition control and lower-link draft sensing

Electrical System of Massey Ferguson, 2675

Battery voltage, charging system and ground.

GroundNegative
Battery volts12
Batteries2
Charging systemAlternator
Charging amps58

Frequently asked questions

How much horsepower does the Massey Ferguson 2675 have?

The Massey Ferguson 2675 delivers 111 hp[P] HP.

What years was the Massey Ferguson 2675 produced?

The Massey Ferguson 2675 was produced in 1978-1983.

What engine does the Massey Ferguson 2675 have?

The Massey Ferguson 2675 is powered by a Diesel, 6-cylinder engine.

What transmission does the Massey Ferguson 2675 use?

The Massey Ferguson 2675 uses a Multi-Power transmission.

Is the Massey Ferguson 2675 4WD?

The Massey Ferguson 2675 is available in 2WD.

Compare the Massey Ferguson 2675 with another model