Massey Ferguson 4335 tractor

Massey Ferguson 4335

Power

78 hp

Production

2001-2003

Engine

Diesel, 4-cylinder

Transmission

Gear

Drive

2WD/4WD

From the same series:

4325
4345

Introduction

Massey Ferguson 4335 Utility Tractor

The Massey Ferguson 4335 is a utility tractor produced in Coventry, England, between 2001 and 2003. It belongs to the 4300 series and is designed for general agricultural applications, offering both two-wheel and four-wheel drive configurations.

Engine and Performance

The tractor is powered by a Perkins 1004.42 liquid-cooled diesel engine. This 4.2-liter, four-cylinder engine provides a gross power output of 78 hp (58.2 kW) and a net rated power of 74 hp (55.2 kW) at 2200 RPM. It features a compression ratio of 17.3:1 and utilizes a thermostart pre-heating system for reliable starting.

Transmission and Drivetrain

Multiple transmission configurations were available to suit various operational needs, ranging from a basic 8-speed gear transmission to a 12-speed mechanical shuttle and a 12-speed power shuttle. All models utilize a dry disc clutch, except for the power shuttle variant, which is equipped with a hydraulic wet disc clutch. Maneuverability is supported by power steering and electro-hydraulic differential locks on both front and rear axles.

Hydraulics and Hitch

The open-center hydraulic system provides a standard SCV flow of 10 gpm (37.9 lpm), with combined flow options reaching up to 17.4 gpm (65.9 lpm) depending on the configuration. The system operates at a pressure of 3046 psi (210.0 bar). The rear hitch is a Category II type, featuring position and draft control, with a base lift capacity of 3665 lbs (1662 kg) at 24 inches behind the lift point.

Operator Environment and Dimensions

The tractor is available with a two-post folding ROPS as standard, with an optional air-conditioned cab. The wheelbase measures 93 inches (236 cm), and the tractor offers a ground clearance of 14 inches (35 cm). Total length is 163 inches (414 cm), and the width varies depending on the wheel tread settings, which range from 56 to 84 inches for the rear axle.

Conclusion

The Massey Ferguson 4335 is a versatile utility tractor suited for varied farming tasks, balancing engine performance with flexible transmission and hydraulic options. It is engineered for durability and operational efficiency in typical agricultural environments.

Production Information of Massey Ferguson, 4335

  • Utility tractor
  • Built in Coventry, England
ManufacturerMassey Ferguson (a part of AGCO)

Dimension and Tires Information of Massey Ferguson, 4335

Rear tread56 to 84 inches [142 to 213 cm]
Wheelbase93 inches [236 cm]
2WD Front tread52 to 76 inches [132 to 193 cm]
Ground clearance14 inches [35 cm]
Length163 inches [414 cm]
4WD Front tread55 to 75 inches [139 to 190 cm]
Width77 inches [195 cm]
2WD Standard tires (ag)Front: 10.00-16. Rear: 480/70R34
4WD Standard tires (ag)Front: 380/70R24. Rear: 480/70R34

Engine Specifications of Massey Ferguson, 4335

  • Perkins 1004.42
  • Liquid-cooled
  • Diesel
  • 4-cylinder
Starter volts12
StarterElectric
Power (gross)78 hp [58.2 kW]
Coolant capacity18.4 qts [17.4 L]
Pre-heatingThermostart
Compression17.3:1
Air cleanerDual paper elements
Displacement258.3 ci [4.2 L]
Rated Power (net)74 hp [55.2 kW]
Bore/Stroke4.055x5.00 inches [103 x 127 mm]
Torque RPM1400
Torque208 lb-ft [282.0 Nm]
Rated RPM2200

Transmission Information of Massey Ferguson, 4335

Transmission variants 1

TypeGear
Gears8 forward and 2 reverse
ClutchDry disc

Transmission variants 2

TypeGear
Gears12 forward and 4 reverse
ClutchDry disc

Transmission variants 3

  • Also available as an 8-speed shuttle on ROPS-equipped models.
TypeMechanical shuttle
Gears12 forward and reverse
ClutchDry disc

Transmission variants 4

TypePower shuttle
Gears12 forward and reverse
ClutchWet disc
  • 8-speed gear
  • 12-speed power shuttle
  • 12-speed gear
  • 12-speed mechanical shuttle

Mechanical Specs of Massey Ferguson, 4335

  • Two- or four-wheel drive
  • Two-post folding ROPS. Cab optional with air-conditioning.
  • Independent hydraulic wet disc brakes
  • Power steering
Differential lockElectro-hydraulic front and rear

Power Information of Massey Ferguson, 4335

Rear PTOIndependent
Engine RPM540@1789
Engine RPM(optional)540/1000 (1.375)
ClutchHydraulic wet disc
Clutch(optional)540@1902
Rear PTO Type540 (1.375)

Dual-speed

Hydraulics Specifications of Massey Ferguson, 4335

TypeOpen center
Type(optional)14.4 gpm [54.5 lpm]
SCV flow10 gpm [37.9 lpm]
Pressure3046 psi [210.0 bar]
Pressure(optional)17.2 gpm [65.1 lpm]
Valves2 to 4

Optional dedicated flow with power shuttle

Combined flow with 540 PTO

Combined flow with 540/1000 PTO

Three-Point Hitch of Massey Ferguson, 4335

Rear TypeII
Rear ArmsTelescopic lower links
Rear Arms(optional)4495 lbs [2038 kg]
ControlPosition and draft control
Rear lift (at 24"/610mm)3665 lbs [1662 kg]

Electrical System of Massey Ferguson, 4335

Battery CCA590
GroundNegative
Cab Charging amps(optional)120
Cab Charging amps80
Charging systemAlternator
Battery volts12
Batteries2
ROPS Charging amps45

Where it sits

With 78 HP, the Massey Ferguson 4335 sits between 5435 (75 HP) and 4345 (90 HP) in Massey Ferguson's range. Its power puts it in the 51th percentile of 2000s models in our database (2822 machines).

Frequently asked questions

How much horsepower does the Massey Ferguson 4335 have?

The Massey Ferguson 4335 delivers 78 HP.

What years was the Massey Ferguson 4335 produced?

The Massey Ferguson 4335 was produced in 2001-2003.

What engine does the Massey Ferguson 4335 have?

The Massey Ferguson 4335 is powered by a Diesel, 4-cylinder engine.

What transmission does the Massey Ferguson 4335 use?

The Massey Ferguson 4335 uses a Gear transmission.

Is the Massey Ferguson 4335 4WD?

The Massey Ferguson 4335 is available in 2WD/4WD.

Compare the Massey Ferguson 4335 with another model