Massey Ferguson 4840
Power
265 hp
Production
1978-1983
Engine
Diesel, 8-cylinder
Transmission
Partial power shift
Drive
4WD
From the same series:
Introduction
Production Information of Massey Ferguson, 4840
The production information of the tractor (4840) includes details about its manufacturing.
| Four-wheel Drive (4WD) tractor |
| Original price was $98,000 in 1983 |
| Manufacturer | Massey Ferguson |
|---|
Dimension and Tires Information of Massey Ferguson, 4840
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 137 inches [347 cm] |
|---|---|
| Front axle | 4 inch diameter [101 mm] |
| Height | 130 inches [330 cm] |
| Length | 252 inches [640 cm] |
| Rear axle | 4 inch diameter [101 mm] |
| Width | 108 inches [274 cm] |
| Ag rear | 18.4-38 |
|---|---|
| Ag front | 23.1-34 |
| 24.5-32 | |
| 20.8-38 | |
| Ag rear | 23.1-34 |
| 20.8-38 | |
| 30.5-32 | |
| Ag front | 18.4-38 |
| 30.5-32 | |
| 24.5-32 |
Engine Specifications of Massey Ferguson, 4840
Get the specifications for the engine and if different options are available.
| Cummins V-903 |
| Liquid-cooled |
| Diesel |
| 8-cylinder |
| Oil capacity | 37.5 qts [35.5 L] |
|---|---|
| Displacement | 903 ci [14.8 L] |
| Air cleaner | Dual dry elements |
| Bore/Stroke | 5.50x4.75 inches [140 x 121 mm] |
| Coolant capacity | 60 qts [56.8 L] |
| Starter volts | 12 |
| Compression | 15.5:1 |
| Power (net) | 265 hp [197.6 kW] |
Transmission Information of Massey Ferguson, 4840Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Three gears (1-3) in two ranges (high/low) with three-speed power shift (low/intermediate/high). |
| Type | Partial power shift |
|---|---|
| Oil capacity | 44 qts [41.6 L] |
| Gears | 18 forward and 6 reverse |
| Clutch | Wet disc with four 14-inch plates |
Transmission variants 2
Transmission variants 3
| Four gears in three ranges, plus reverse range. |
| Type | Gear |
|---|---|
| Gears | 12 forward and 4 reverse |
| 18-speed partial power shift |
| 12-speed gear |
Mechanical Specs of Massey Ferguson, 4840Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Cab standard with heat and air-conditioning. Optional AM/FM 8-track stereo. |
| Hydraulic caliper brakes |
| Articulated power steering |
| Final drives | Planetary |
|---|
Power Information of Massey Ferguson, 4840Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 1000 (1.75) |
| Engine RPM | 1000@2350 |
Hydraulics Specifications of Massey Ferguson, 4840
Hydraulic system type, pressure, pump flow and valves.
| Steering cap. | 96 qts [90.9 L] |
|---|---|
| Type | Open center |
| 28 gpm (auxiliary) [106.0 lpm] | |
| 16 gpm (lift) [60.6 lpm] | |
| Valves | 3 to 4 |
| Total flow | 60 gpm [227.1 lpm] |
| Pump flow | 16 gpm (transmission) [60.6 lpm] |
Three-Point Hitch of Massey Ferguson, 4840
Hitch category and rear/front lift capacity.
| Rear Type | IV |
|---|---|
| Control | Position control with electronic lower link sensing |
| Rear lift (at 24"/610mm) | 11000 lbs [4989 kg] |
Electrical System of Massey Ferguson, 4840
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Batteries | 4 |
| Charging system | Alternator |
| Charging amps | 60 |
Frequently asked questions
How much horsepower does the Massey Ferguson 4840 have?
The Massey Ferguson 4840 delivers 265 HP.
What years was the Massey Ferguson 4840 produced?
The Massey Ferguson 4840 was produced in 1978-1983.
What engine does the Massey Ferguson 4840 have?
The Massey Ferguson 4840 is powered by a Diesel, 8-cylinder engine.
What transmission does the Massey Ferguson 4840 use?
The Massey Ferguson 4840 uses a Partial power shift transmission.
Is the Massey Ferguson 4840 4WD?
The Massey Ferguson 4840 is available in 4WD.