Massey Ferguson 8660
Power
265 hp
Production
2009-2013
Engine
The engine uses AGCO's e3 selective catalytic reduction (SCR) system to reduce nitrogen oxides (NOx). The system uses a diesel exhaust fluid that is injected into the exhaust gas., 6-cylinder
Transmission
Dyna-VT
Weight
38,890 lbs [17640 kg]
Drive
4WD
From the same series:
Introduction
Production Information of Massey Ferguson, 8660
The production information of the tractor (8660) includes details about its manufacturing.
| Original price was $196,119 in 2009 |
| Row-Crop tractor |
| Built in Beauvais, France |
| Manufacturer | Massey Ferguson (a part of AGCO) |
|---|
Dimension and Tires Information of Massey Ferguson, 8660
This section sums up the dimension and tires information of the tractor.
| Rear tread | 58 to 5 inches [147 to 12 cm] |
|---|---|
| Wheelbase | 122.2 inches [310 cm] |
| Max weight | 38,890 lbs [17640 kg] |
| Shipping weight | 24,250 lbs [10999 kg] |
| Length | 223.2 inches [566 cm] |
| Bar rear axle | 4.33 by 105 inches [109 by 2667 mm] |
| Front axle | 4WD |
| Height (cab) | 133.1 inches [338 cm] |
| Rear tread | 58.5 to 119.5 inches [148 to 303 cm] |
| Front tread | 60.9 to 88.8 inches [154 to 225 cm] |
| Bar rear axle | 4.33 by 118 inches [109 by 2997 mm] |
| Front axle | Quadlink suspended |
| Standard tires (ag) | Front: 420/90R30. Rear: 480/80R46 |
|---|
Engine Specifications of Massey Ferguson, 8660
Get the specifications for the engine and if different options are available.
| AGCO SISU POWER 84CTA |
| Liquid-cooled |
| The engine uses AGCO's e3 selective catalytic reduction (SCR) system to reduce nitrogen oxides (NOx). The system uses a diesel exhaust fluid that is injected into the exhaust gas. |
| Turbocharged intercooled diesel |
| 6-cylinder |
| Rated RPM | 2200 |
|---|---|
| Compression | 16.7:1 |
| Starter volts | 12 |
| Emissions | Tier III |
| Torque | 955 lb-ft [1295.0 Nm] |
| Integrated exhausted gas recirculation optional | |
| Power | 265 hp [197.6 kW] |
| Emission control | Selective catalytic reduction (SCR) |
| Bore/Stroke | 4.37x5.71 inches [111 x 145 mm] |
| Displacement | 512.6 ci [8.4 L] |
| Pre-heating | Thermostart |
| Torque RPM | 1500 |
| Starter | Electric |
| Fuel system | Electronic high pressure common rail |
| Maximum Power | 295 hp [220.0 kW] |
Transmission Information of Massey Ferguson, 8660Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Dyna-VT |
|---|---|
| Type | Continuously-variable transmission (CVT) |
| Gears | Infinite forward and reverse |
Mechanical Specs of Massey Ferguson, 8660Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Hydraulic wet disc brakes |
| Power steering |
| Cab standard with heat and air-conditioning. Optional heated seat, power adjustable mirrors, and automatic temperature control. Engine optionally available with exhaust gas recirculation instead of SCR. |
| Pneumatic OptOptional | |
| Final drives | Inboard planetary |
| Trailer brakes | Hydraulic OptOptional |
| Differential lock | Electro-hydraulic |
Power Information of Massey Ferguson, 8660Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Front PTO | Independent OptOptional |
|---|---|
| Rear PTO | Independent |
| Engine RPM | 1000@1970 |
| 540E/1000 (1.375)OptOptional | |
| Clutch | Electro-hydraulic |
| Front PTO Type | 1000 (1.375) |
| 1000E@1605 | |
| Rear PTO Type | 1000E/1000 (1.75) |
Hydraulics Specifications of Massey Ferguson, 8660
Hydraulic system type, pressure, pump flow and valves.
| Type | Closed center load sensing |
|---|---|
| Total flow | 46.2 gpm [174.9 lpm] |
| Pump flow | 26.4 gpm [99.9 lpm] |
| Pressure | 2,901 psi [200.0 bar] |
| Valves | 4 to 6 |
Three-Point Hitch of Massey Ferguson, 8660
Hitch category and rear/front lift capacity.
| Cat. 3 Heavy Duty (optional) | |
| Rear Type | III, IV |
| Front lift (at ends) | 11,020 lbs [4998 kg] |
| Front Hitch | III |
| Rear lift (at ends) | 26,460 lbs [12002 kg] |
| Cat IV (optional) | |
| Drawbar | Cat. 3 |
| Rear lift (at 24"/610mm) | 21,336 lbs [9678 kg] |
Electrical System of Massey Ferguson, 8660
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery CCA | 775 |
| Batteries | 2 |
| Charging system | Alternator |
| Battery volts | 12 |
| Charging amps | 240 *Dual 120A alternators. |
Frequently asked questions
How much horsepower does the Massey Ferguson 8660 have?
The Massey Ferguson 8660 delivers 265 HP.
What years was the Massey Ferguson 8660 produced?
The Massey Ferguson 8660 was produced in 2009-2013.
What engine does the Massey Ferguson 8660 have?
The Massey Ferguson 8660 is powered by a The engine uses AGCO's e3 selective catalytic reduction (SCR) system to reduce nitrogen oxides (NOx). The system uses a diesel exhaust fluid that is injected into the exhaust gas., 6-cylinder engine.
What transmission does the Massey Ferguson 8660 use?
The Massey Ferguson 8660 uses a Dyna-VT transmission.
How much does the Massey Ferguson 8660 weigh?
The Massey Ferguson 8660 weighs 38,890 lbs [17640 kg].
Is the Massey Ferguson 8660 4WD?
The Massey Ferguson 8660 is available in 4WD.