
Massey Ferguson 5611
Power
105 hp
Production
2013-2016
Engine
Turbocharged intercooled diesel, 4-cylinder 16-valve
Transmission
Dyna-4
Weight
8929 lbs (2WD) [4050 kg]
Drive
2WD/4WD
From the same series:
Introduction
Massey Ferguson 5611 Utility Tractor
The Massey Ferguson 5611 is a utility tractor produced by AGCO between 2013 and 2016. Designed for versatile agricultural operations, it belongs to the 5600 series and incorporates modern engine and hydraulic technologies suited for mid-sized farming tasks.
Engine and Powertrain
The tractor is powered by an AGCO Power 44 AWI four-cylinder, 16-valve engine with a displacement of 4.4 liters. This turbocharged and intercooled diesel engine generates a maximum power of 110 hp, with a rated power of 105 hp. It utilizes a high-pressure common rail direct injection system and features Selective Catalytic Reduction (SCR) technology to meet Interim Tier IV emission standards. An intake heater is included to assist with cold-weather starting.
Transmission and Drivetrain
The 5611 offers a Dyna-4 transmission featuring a four-speed power shift with a power shuttle, providing 16 forward and 16 reverse gears. An optional creeper transmission is available, expanding the configuration to 32 forward and 32 reverse gears for tasks requiring very low ground speeds. The tractor is available in either two-wheel or four-wheel drive configurations, with a fully locking electro-hydraulic differential for enhanced traction.
Hydraulics and Hitch
The hydraulic system utilizes an open-center design with a pump flow of 15 gpm (56.8 lpm) at 2900 psi, with an optional closed-center pressure flow compensated (PFC) system capable of 26 gpm (98.4 lpm). The rear hitch is a Category II type, featuring electronic lower link draft control and a lift capacity of 11,450 lbs (5,193 kg) at the link ends. The rear PTO is independent and electro-hydraulic, offering multiple speed settings including 540 and 1000 RPM.
Operator Environment and Dimensions
The machine comes standard with an air-conditioned cab, with an optional mechanical cab suspension available to improve operator comfort. The tractor has a wheelbase of 100.4 inches (255 cm). The operating weight varies depending on the drivetrain configuration, measuring 8,929 lbs (4,050 kg) for the 2WD model and 10,582 lbs (4,799 kg) for the 4WD model.
Conclusion
The Massey Ferguson 5611 is a capable utility tractor designed for general agricultural applications. Its combination of a high-torque 4.4-liter engine, flexible transmission options, and substantial hydraulic lift capacity makes it well-suited for a variety of field and farmyard tasks.
Production Information of Massey Ferguson, 5611
- Utility tractor
- Original price was $84,950 in 2014
| Manufacturer | Massey Ferguson (a part of AGCO) |
|---|
Dimension and Tires Information of Massey Ferguson, 5611
- Flange rear axle
| Wheelbase | 100.4 inches [255 cm] |
|---|---|
| Wheelbase(optional) | 10582 lbs (4WD) [4799 kg] |
| Height (cab) | 111.5 inches [283 cm] |
| Weight | 8929 lbs (2WD) [4050 kg] |
| Ag rear | 16.9R38 |
|---|
Engine Specifications of Massey Ferguson, 5611
- AGCO Power 44 AWI
- Liquid-cooled
- Turbocharged intercooled diesel
- 4-cylinder 16-valve
| Torque | 468 lb-ft [634.6 Nm] |
|---|---|
| Idle RPM | 850-2402 |
| Emission control | Selective catalytic reduction (SCR) |
| Torque RPM | 1500 |
| Maximum Power | 110 hp [82.0 kW] |
| Fuel system | High pressure common rail direct injection |
| Power | 105 hp [78.3 kW] |
| Displacement | 269 ci [4.4 L] |
| Emissions | Interim Tier IV |
| Bore/Stroke | 4.25x4.72 inches [108 x 120 mm] |
| Rated RPM | 2200 |
| Starter | Electric |
| Starter volts | 12 |
| Pre-heating | Intake heater |
| Air cleaner | Dual stage dry |
Transmission Information of Massey Ferguson, 5611
Transmission variants 1
| Transmission | Dyna-4 |
|---|---|
| Oil capacity | 78 qts [73.8 L] |
| Clutch | Wet disc |
| Type | Four-speed power shift with power shuttle |
| Gears | 16 forward and reverse |
Transmission variants 2
| Type | Creeper |
|---|---|
| Gears | 32 forward and reverse |
- 16-speed four-speed power shift with power shuttle
- 32-speed creeper
Mechanical Specs of Massey Ferguson, 5611
- Two- or four-wheel drive
- Hydraulic wet disc brakes
- Cab standard with air-conditioning. Optional mechanical cab suspension. AGCOMMAND (optional)
| Steering | Hydrostatic power |
|---|---|
| Final drives | Internal planetary |
| Trailer brakes | Pneumatic (optional) |
| Differential lock | Full locking electro-hydraulic |
Power Information of Massey Ferguson, 5611
| Rear PTO | Independent |
|---|---|
| Engine RPM | 540@1920 |
| Engine RPM(optional) | 540/540E/1000 (1.375) |
| Clutch | Electro-hydraulic |
| Clutch(optional) | 540E@1964 |
| Rear PTO Type | 540/540E (1.375) |
Hydraulics Specifications of Massey Ferguson, 5611
| Type | Open center |
|---|---|
| Pump flow | 15 gpm [56.8 lpm] |
| Valves | 2 to 4 |
| Valves(optional) | Closed center pressure flow compensated optional (PFC) |
| Valves(optional) | 26 gpm (Twin Flow) [98.4 lpm] |
| Pressure | 2900 psi [200.0 bar] |
Three-Point Hitch of Massey Ferguson, 5611
| Rear Type | II |
|---|---|
| Front Hitch | II (optional) |
| Rear lift (at 24"/610mm) | 8575 lbs [3889 kg] |
| Control | Electronic lower link draft control |
| Front lift (at ends) | 5500 lbs [2494 kg] |
| Rear lift (at ends) | 11450 lbs [5193 kg] |
Electrical System of Massey Ferguson, 5611
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery volts(optional) | 175 (optional) |
| Charging system | Alternator |
| Charging amps | 120 |
Where it sits
With 105 HP, the Massey Ferguson 5611 sits between 5610 (100 HP) and 5612 (115 HP) in Massey Ferguson's range. Its power puts it in the 62th percentile of 2010s models in our database (2476 machines).
Frequently asked questions
How much horsepower does the Massey Ferguson 5611 have?
The Massey Ferguson 5611 delivers 105 HP.
What years was the Massey Ferguson 5611 produced?
The Massey Ferguson 5611 was produced in 2013-2016.
What engine does the Massey Ferguson 5611 have?
The Massey Ferguson 5611 is powered by a Turbocharged intercooled diesel, 4-cylinder 16-valve engine.
What transmission does the Massey Ferguson 5611 use?
The Massey Ferguson 5611 uses a Dyna-4 transmission.
How much does the Massey Ferguson 5611 weigh?
The Massey Ferguson 5611 weighs 8929 lbs (2WD) [4050 kg].
Is the Massey Ferguson 5611 4WD?
The Massey Ferguson 5611 is available in 2WD/4WD.