Massey Ferguson 7497
Power
205 hp
Production
2009-2012
Engine
Diesel, 6-cylinder 24-valve
Transmission
Dyna-VT
Weight
17685 lbs [8021 kg]
Drive
4WD
From the same series:
Introduction
Production Information of Massey Ferguson, 7497
The production information of the tractor (7497) includes details about its manufacturing.
| Row-Crop tractor |
| Built in Beauvais, France |
| Manufacturer | Massey Ferguson |
|---|
Dimension and Tires Information of Massey Ferguson, 7497
This section sums up the dimension and tires information of the tractor.
| Bar rear axle |
| Operating weight | 17685 lbs [8021 kg] |
|---|---|
| Wheelbase | 118 inches [299 cm] |
| Height (cab) | 120 inches [304 cm] |
| 118.1 inches (long axle) [299 cm] | |
| Length | 210 inches [533 cm] |
| Clearance (drawbar) | 16 inches [40 cm] |
| Shipping weight | 16372 lbs [7426 kg] |
| Width | 97.2 inches (short axle) [246 cm] |
| Front tread | 60 to 88 inches [152 to 223 cm] |
No data available
Engine Specifications of Massey Ferguson, 7497
Get the specifications for the engine and if different options are available.
| AGCO Sisu Power |
| Liquid-cooled |
| Diesel |
| 6-cylinder 24-valve |
| Emissions | Tier III |
|---|---|
| Displacement | 451.6 ci [7.4 L] |
| Power | 205 hp [152.9 kW] |
| Bore/Stroke | 4.25x4.78 inches [108 x 121 mm] |
| Starter type | Electric |
| Maximum Power | 225 hp [167.8 kW] |
Transmission Information of Massey Ferguson, 7497Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Dyna-VT |
|---|---|
| Type | Continuously variable transmission (CVT) |
| Gears | Infinite forward and reverse (two-range) |
Mechanical Specs of Massey Ferguson, 7497Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Hydraulic wet disc brakes |
| Power steering |
| Cab standard with air-conditioning. Pneumatic cab suspension optional. |
| Final drives | Inboard planetary |
|---|---|
| Differential lock | Electro-hydraulic front and rear |
Power Information of Massey Ferguson, 7497Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Clutch | Electro-hydraulic |
| Rear PTO Type | 540/540E/1000 |
Hydraulics Specifications of Massey Ferguson, 7497
Hydraulic system type, pressure, pump flow and valves.
| Type | Closed center |
|---|---|
| Total flow | 29.1 gpm [110.1 lpm] |
| Valves | 3 or 4 |
| Capacity | 15.3 gal [57.9 L] |
| 39.6 gpmOptOptional [149.9 lpm] | |
| Pressure | 2900 psi [200.0 bar] |
Three-Point Hitch of Massey Ferguson, 7497
Hitch category and rear/front lift capacity.
| Rear Type | III |
|---|---|
| Front lift | 8800 lbs [3991 kg] |
| Front Hitch | Optional |
| Control | Lower-link draft sensing |
| Rear lift (at 24"/610mm) | 16140 lbs [7321 kg] |
Electrical System of Massey Ferguson, 7497
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery CCA | 600 |
| Batteries | 2 |
| Charging system | Alternator |
| Battery volts | 12 |
| Charging amps | 175 |
Frequently asked questions
How much horsepower does the Massey Ferguson 7497 have?
The Massey Ferguson 7497 delivers 205 HP.
What years was the Massey Ferguson 7497 produced?
The Massey Ferguson 7497 was produced in 2009-2012.
What engine does the Massey Ferguson 7497 have?
The Massey Ferguson 7497 is powered by a Diesel, 6-cylinder 24-valve engine.
What transmission does the Massey Ferguson 7497 use?
The Massey Ferguson 7497 uses a Dyna-VT transmission.
How much does the Massey Ferguson 7497 weigh?
The Massey Ferguson 7497 weighs 17685 lbs [8021 kg].
Is the Massey Ferguson 7497 4WD?
The Massey Ferguson 7497 is available in 4WD.