Massey Ferguson 7622
Power
200 hp
Production
2013-2014
Engine
Turbocharged air-to-air aftercooled diesel, 6-cylinder 24-valve
Transmission
Dyna-6
Drive
4WD
From the same series:
Introduction
Massey Ferguson 7622: Reference and Technical Specifications
The Massey Ferguson 7622 is a row-crop tractor produced between 2013 and 2014 in Beauvais, France. Part of the 7600 series, this machine was designed to provide a balance of power and operational flexibility for professional agricultural applications.
Engine and Performance
The tractor is powered by a 7.4-liter, six-cylinder Sisu diesel engine. It utilizes a high-pressure common rail fuel system and a turbocharger with air-to-air aftercooling to achieve a net power output of 200 hp (149.1 kW). The engine complies with Interim Tier IV emission standards through the use of Selective Catalytic Reduction (SCR) technology. It is designed for high-torque operations, featuring a rated engine speed of 2100 RPM.
Transmission Systems
Users can select between two transmission types. The Dyna-6 transmission offers 24 forward and reverse gears through a six-speed power shift configuration spread across four ranges. Alternatively, the Dyna-VT transmission provides an infinitely variable speed range through a two-range continuously variable transmission (CVT), allowing for precise ground speed management independent of engine RPM.
Hydraulics and Hitch
The 7622 is equipped with a Closed-Center Load Sensing (CCLS) hydraulic system, operating at a pressure of 2900 psi (200 bar). The system delivers a total flow of 29 gpm (109.8 lpm), with specific SCV flow capabilities reaching 24.3 gpm (92 lpm). The rear hitch features electronic lower link draft sensing and provides a lift capacity of up to 14,000 lbs (6350 kg) depending on the transmission model.
Mechanical and Comfort Features
The tractor features a four-wheel drive system with inboard planetary final drives. Standard configuration includes a cabin, which can be upgraded with the optional OptiRide hydraulic suspension to improve operator comfort. Steering is power-assisted, and the machine utilizes hydraulic wet disc brakes. Advanced guidance options, such as the Auto-Guide 3000, were available to enhance field efficiency.
Conclusion
The Massey Ferguson 7622 is a robust, high-horsepower row-crop tractor suited for varied farming tasks requiring high hydraulic capacity and precise transmission control. Its combination of Sisu engine technology and versatile transmission options makes it a reliable asset for modern agricultural operations.
Production Information of Massey Ferguson, 7622
- Row-Crop tractor
- Built in Beauvais, France
| Manufacturer | Massey Ferguson (a part of AGCO) |
|---|
Dimension and Tires Information of Massey Ferguson, 7622
| Bar rear axle | 84.17 inch length [2137 mm (Dyna-6)] |
|---|---|
| Wheelbase | 117.8 inches [299 cm] |
| Front axle | 4WD |
| Front axle(optional) | 124 inches (AutoGuide) [314 cm] |
| Length | 203.6 inches [517 cm] |
| Bar rear axle | 89.65 inch length [2277 mm (Dyna-VT)] |
| Front axle | QuadLink Suspended 4WD |
| Height (cab) | 120.7 inches [306 cm] |
| Long bar rear axle | 113 inch length [2870 mm (Dyna-VT)] |
| Long bar rear axle | 112 inch length [2844 mm (Dyna-6)] |
Engine Specifications of Massey Ferguson, 7622
- Sisu
- Liquid-cooled
- 6-cylinder 24-valve
- The 7.4L engine is used when the 7622 is equipped with the Dyna-6 transmission.
- Turbocharged air-to-air aftercooled diesel
| Starter volts | 12 |
|---|---|
| Starter | Electric |
| Emissions | Interim Tier IV |
| Fuel system | Electronic high-pressure common rail |
| Power (net) | 200 hp [149.1 kW] |
| Bore/Stroke | 4.252x5.276 inches [108 x 134 mm] |
| Emission control | Selective catalytic reduction (SCR) |
| Displacement | 449.4 ci [7.4 L] |
| Rated RPM | 2100 |
| Compression | 17.8:1 |
| Pre-heating | Thermostart |
Transmission Information of Massey Ferguson, 7622
Transmission variants 1
- Six power shift gears in four ranges.
| Transmission | Dyna-6 |
|---|---|
| Type | Six-speed power shift |
| Gears | 24 forward and reverse |
Transmission variants 2
- Continuously-variable transmission (CVT)
| Transmission | Dyna-VT |
|---|---|
| Gears | Infinite forward and reverse (2-range) |
Mechanical Specs of Massey Ferguson, 7622
- Four-wheel drive
- Hydraulic wet disc brakes
- Power steering
- Cab standard. Optional hydraulic OptiRide cab suspension. AGCOCOMMAND (optional); Auto-Guide 3000 (optional)
| Final drives | Inboard planetary |
|---|---|
| Trailer brakes | Hydraulic (optional) |
| Differential lock | Electro-hydraulic standard |
Power Information of Massey Ferguson, 7622
| Rear PTO | Independent |
|---|---|
| Rear PTO(optional) | 540/1000/1000E (1.375) |
| Rear PTO(optional) | 540/540E/1000 (1.375) |
| Clutch | Electro-hydraulic |
| Clutch(optional) | 540@2065 (Dyna-VT) |
| Clutch(optional) | 540/540E/1000/1000E (1.375) |
| Rear PTO Type | 540/1000 (1.375) |
| Rear PTO Type(optional) | 1000E@1595 |
| Rear PTO Type(optional) | 1000@2034 (Dyna-VT) |
| Rear PTO Type(optional) | 540E@1590 (Dyna-VT) |
| Rear PTO Type(optional) | 540E@1524 (Dyna-6) |
| Engine RPM | 540@1890 (Dyna-6) |
Hydraulics Specifications of Massey Ferguson, 7622
| SCV flow | 24.3 gpm [92.0 lpm] |
|---|---|
| Type | Closed-center load sensing (CCLS) |
| Type(optional) | 4 (2 mech, 2 elec) |
| Valves | 3 (mechanical) |
| Capacity | 26.4 gal [99.9 L] |
| Total flow | 29 gpm [109.8 lpm] |
| Total flow(optional) | 4 (electric) |
| Pressure | 2900 psi [200.0 bar] |
| Pressure(optional) | 39 gpm [147.6 lpm] |
Three-Point Hitch of Massey Ferguson, 7622
| Control | Electronic lower link draft sensing |
|---|---|
| Drawbar | Cat. II with drop pin |
| Front Hitch | Optional |
| Rear lift (at ends) | 14000 lbs (Dyna-6) [6350 kg] |
| Rear lift (at ends)(optional) | 13715 lbs (Dyna-VT) [6221 kg] |
Electrical System of Massey Ferguson, 7622
| Battery volts | 12 |
|---|---|
| Ground | Negative |
| Ground(optional) | 240 (dual 120 option) |
| Ground(optional) | 175 (option) |
| Charging system | Alternator |
| Batteries | 2 |
| Charging amps | 120 |
Where it sits
With 200 HP, the Massey Ferguson 7622 sits between 7620 (185 HP) and 7624 (225 HP) in Massey Ferguson's range. Its power puts it in the 83th percentile of 2010s models in our database (2476 machines).
Frequently asked questions
How much horsepower does the Massey Ferguson 7622 have?
The Massey Ferguson 7622 delivers 200 HP.
What years was the Massey Ferguson 7622 produced?
The Massey Ferguson 7622 was produced in 2013-2014.
What engine does the Massey Ferguson 7622 have?
The Massey Ferguson 7622 is powered by a Turbocharged air-to-air aftercooled diesel, 6-cylinder 24-valve engine.
What transmission does the Massey Ferguson 7622 use?
The Massey Ferguson 7622 uses a Dyna-6 transmission.
Is the Massey Ferguson 7622 4WD?
The Massey Ferguson 7622 is available in 4WD.