Massey Ferguson 7616 tractor

Massey Ferguson 7616

Power

150 hp

Production

2013-2014

Engine

Turbocharged air-to-air aftercooled diesel, 6-cylinder 24-valve

Transmission

Dyna-6

Drive

4WD

From the same series:

7615
7618

Introduction

Massey Ferguson 7616 Row-Crop Tractor

The Massey Ferguson 7616 is a high-performance row-crop tractor manufactured in Beauvais, France, between 2013 and 2014. Designed for versatility and operational efficiency, this model is part of the 7600 series and serves as a robust solution for a wide range of agricultural applications.

Engine and Performance

The tractor is powered by a 6.6-liter Sisu 6-cylinder, 24-valve turbocharged diesel engine with air-to-air aftercooling. It delivers a net power output of 150 hp (111.9 kW) at a rated speed of 2100 RPM. The engine utilizes an electronic high-pressure common rail fuel system and Selective Catalytic Reduction (SCR) technology to meet Interim Tier IV emission standards.

Transmission Systems

Two transmission options were available for the 7616: the Dyna-6, a six-speed power shift transmission offering 24 forward and reverse speeds, and the Dyna-VT, a continuously variable transmission (CVT) that provides seamless, infinite speed control in both directions.

Hydraulics and PTO

The hydraulic system is a closed-center load-sensing (CCLS) type, providing a total flow of 29 gpm (109.8 lpm) at a pressure of 2900 psi (200 bar). It features an independent rear PTO with multiple speed configurations, including 540, 540E, 1000, and 1000E RPM, controlled via an electro-hydraulic clutch.

Mechanical Configuration

The 7616 is equipped with four-wheel drive and hydraulic wet disc brakes. For enhanced operator comfort, it features a standard cab with an optional hydraulic OptiRide suspension. Advanced precision farming capabilities are supported through optional AGCOCOMMAND and Auto-Guide 3000 systems.

Conclusion

With its flexible transmission options, substantial hydraulic capacity, and balanced dimensions, the Massey Ferguson 7616 is suited for demanding row-crop operations requiring both power and precision control.

Production Information of Massey Ferguson, 7616

  • Row-Crop tractor
  • Built in Beauvais, France
ManufacturerMassey Ferguson (a part of AGCO)

Dimension and Tires Information of Massey Ferguson, 7616

Long bar rear axle113 inch length [2870 mm (Dyna-VT)]
Wheelbase113.1 inches [287 cm]
Front axle4WD
Front axle(optional)120.7 inches (AutoGuide) [306 cm]
Length192.8 inches [489 cm]
Bar rear axle79.84 inch length [2027 mm]
Front axleQuadLink Suspended 4WD
Height (cab)117.4 inches [298 cm]
Long bar rear axle105.2 inch length [2672 mm]
Bar rear axle89.65 inch length [2277 mm (Dyna-VT)]
Flange rear axle72.24 inch length [1834 mm]

Engine Specifications of Massey Ferguson, 7616

  • Sisu
  • Liquid-cooled
  • Turbocharged air-to-air aftercooled diesel
  • 6-cylinder 24-valve
Starter volts12
Emission controlSelective catalytic reduction (SCR)
Power (net)150 hp [111.9 kW]
Pre-heatingThermostart
Fuel systemElectronic high-pressure common rail
Displacement402.5 ci [6.6 L]
EmissionsInterim Tier IV
Bore/Stroke4.252x4.724 inches [108 x 120 mm]
StarterElectric
Rated RPM2100
Compression17.4:1

Transmission Information of Massey Ferguson, 7616

Transmission variants 1

  • Six power shift gears in four ranges.
TransmissionDyna-6
TypeSix-speed power shift
Gears24 forward and reverse

Transmission variants 2

  • Continuously-variable transmission (CVT)
TransmissionDyna-VT
GearsInfinite forward and reverse (2-range)

Mechanical Specs of Massey Ferguson, 7616

  • Four-wheel drive
  • Hydraulic wet disc brakes
  • Power steering
  • Cab standard. Optional hydraulic OptiRide cab suspension. AGCOCOMMAND (optional); Auto-Guide 3000 (optional)
Final drivesInboard planetary
Trailer brakesHydraulic (optional)
Differential lockElectro-hydraulic standard

Power Information of Massey Ferguson, 7616

Rear PTOIndependent
Rear PTO(optional)540/540E/1000/1000E (1.375)
Rear PTO(optional)540/540E/1000 (1.375)
ClutchElectro-hydraulic
Clutch(optional)540E@1533
Engine RPM540@1890
Rear PTO Type540/1000 (1.375)
Rear PTO Type(optional)1000E@1572
Rear PTO Type(optional)1000@2030
Rear PTO Type(optional)540E@1590 (Dyna-VT)
Rear PTO Type(optional)540@2065 (Dyna-VT)

Hydraulics Specifications of Massey Ferguson, 7616

TypeClosed-center load sensing (CCLS)
Valves3 (mechanical)
Pressure2900 psi [200.0 bar]
Pressure(optional)Open center
SCV flow24.3 gpm [92.0 lpm]
SCV flow(optional)4 (2 mech, 2 elec)
Capacity26.4 gal [99.9 L]
Total flow29 gpm [109.8 lpm]

Three-Point Hitch of Massey Ferguson, 7616

ControlElectronic lower link draft sensing
DrawbarCat. II with drop pin
Front HitchOptional
Rear lift (at ends)9800 lbs (Dyna-6) [4445 kg]
Rear lift (at ends)(optional)11500 lbs (Dyna-VT) [5216 kg]

Electrical System of Massey Ferguson, 7616

Battery volts12
GroundNegative
Ground(optional)240 (dual 120 option)
Ground(optional)175 (option)
Charging systemAlternator
Batteries2
Charging amps120

Where it sits

With 150 HP, the Massey Ferguson 7616 sits between 7615 (140 HP) and 7618 (165 HP) in Massey Ferguson's range. Its power puts it in the 78th percentile of 2010s models in our database (2476 machines).

Frequently asked questions

How much horsepower does the Massey Ferguson 7616 have?

The Massey Ferguson 7616 delivers 150 HP.

What years was the Massey Ferguson 7616 produced?

The Massey Ferguson 7616 was produced in 2013-2014.

What engine does the Massey Ferguson 7616 have?

The Massey Ferguson 7616 is powered by a Turbocharged air-to-air aftercooled diesel, 6-cylinder 24-valve engine.

What transmission does the Massey Ferguson 7616 use?

The Massey Ferguson 7616 uses a Dyna-6 transmission.

Is the Massey Ferguson 7616 4WD?

The Massey Ferguson 7616 is available in 4WD.

Compare the Massey Ferguson 7616 with another model