Massey Ferguson 7618 tractor

Massey Ferguson 7618

Power

165 hp

Production

2013-2014

Engine

Turbocharged air-to-air aftercooled diesel, 6-cylinder 24-valve

Transmission

Dyna-6

Drive

4WD

From the same series:

7616
7619

Introduction

Massey Ferguson 7618 Tractor

The Massey Ferguson 7618 is a row-crop tractor produced between 2013 and 2014 in Beauvais, France. As part of the 7600 series, this model is designed for professional agricultural operations, offering a balance of power and hydraulic versatility.

Engine and Power

The tractor is powered by a 6-cylinder, 24-valve Sisu engine with a displacement of 6.6 liters. It features an electronic high-pressure common rail fuel system and is turbocharged with air-to-air aftercooling. It produces a net power output of 165 hp (123.0 kW). Emissions are managed through a Selective Catalytic Reduction (SCR) system, meeting Interim Tier IV standards.

Transmission and Drivetrain

Two transmission options are available: the Dyna-6, a 24-speed power shift transmission, and the Dyna-VT, a continuously variable transmission (CVT). The tractor is equipped with four-wheel drive and features inboard planetary final drives. Differential locks are standard and electro-hydraulically operated.

Hydraulics and PTO

The hydraulic system utilizes a closed-center load sensing (CCLS) design, providing a total flow of 29 gpm (109.8 lpm) at a pressure of 2900 psi. The rear lift capacity varies by transmission type, reaching up to 11,500 lbs (5,216 kg) for the Dyna-VT model. The independent rear PTO offers multiple speed configurations, including 540, 540E, 1000, and 1000E RPM, controlled by an electro-hydraulic clutch.

Operator Environment and Dimensions

The tractor is built with a 113.1-inch wheelbase and is fitted with a standard cab, which can be upgraded with an optional hydraulic OptiRide suspension. Advanced technology integrations such as AGCOCOMMAND and Auto-Guide 3000 guidance systems are available to enhance operational precision.

Conclusion

The Massey Ferguson 7618 is a robust, well-rounded tractor suited for a wide variety of row-crop applications. Its combination of high-capacity hydraulics, flexible transmission choices, and electronic draft control makes it a reliable asset for tasks requiring precise power management.

Production Information of Massey Ferguson, 7618

  • Row-Crop tractor
  • Built in Beauvais, France
ManufacturerMassey Ferguson (a part of AGCO)

Dimension and Tires Information of Massey Ferguson, 7618

Long bar rear axle113 inch length [2870 mm (Dyna-VT)]
Wheelbase113.1 inches [287 cm]
Front axle4WD
Front axle(optional)120.7 inches (AutoGuide) [306 cm]
Length192.8 inches [489 cm]
Bar rear axle79.84 inch length [2027 mm]
Front axleQuadLink Suspended 4WD
Height (cab)117.4 inches [298 cm]
Long bar rear axle105.2 inch length [2672 mm]
Bar rear axle89.65 inch length [2277 mm (Dyna-VT)]
Flange rear axle72.24 inch length [1834 mm]

Engine Specifications of Massey Ferguson, 7618

  • Sisu
  • Liquid-cooled
  • Turbocharged air-to-air aftercooled diesel
  • 6-cylinder 24-valve
Starter volts12
Emission controlSelective catalytic reduction (SCR)
Power (net)165 hp [123.0 kW]
Pre-heatingThermostart
Fuel systemElectronic high-pressure common rail
Displacement402.5 ci [6.6 L]
EmissionsInterim Tier IV
Bore/Stroke4.252x4.724 inches [108 x 120 mm]
StarterElectric
Rated RPM2100
Compression17.4:1

Transmission Information of Massey Ferguson, 7618

Transmission variants 1

  • Six power shift gears in four ranges.
TransmissionDyna-6
TypeSix-speed power shift
Gears24 forward and reverse

Transmission variants 2

  • Continuously-variable transmission (CVT)
TransmissionDyna-VT
GearsInfinite forward and reverse (2-range)

Mechanical Specs of Massey Ferguson, 7618

  • Four-wheel drive
  • Hydraulic wet disc brakes
  • Power steering
  • Cab standard. Optional hydraulic OptiRide cab suspension. AGCOCOMMAND (optional); Auto-Guide 3000 (optional)
Final drivesInboard planetary
Trailer brakesHydraulic (optional)
Differential lockElectro-hydraulic standard

Power Information of Massey Ferguson, 7618

Rear PTOIndependent
Rear PTO(optional)540/540E/1000/1000E (1.375)
Rear PTO(optional)540/540E/1000 (1.375)
ClutchElectro-hydraulic
Clutch(optional)540E@1533
Engine RPM540@1890
Rear PTO Type540/1000 (1.375)
Rear PTO Type(optional)1000E@1572
Rear PTO Type(optional)1000@2030
Rear PTO Type(optional)540E@1590 (Dyna-VT)
Rear PTO Type(optional)540@2065 (Dyna-VT)

Hydraulics Specifications of Massey Ferguson, 7618

TypeClosed-center load sensing (CCLS)
Valves3 (mechanical)
Pressure2900 psi [200.0 bar]
Pressure(optional)Open center
SCV flow24.3 gpm [92.0 lpm]
SCV flow(optional)4 (2 mech, 2 elec)
Capacity26.4 gal [99.9 L]
Total flow29 gpm [109.8 lpm]

Three-Point Hitch of Massey Ferguson, 7618

ControlElectronic lower link draft sensing
DrawbarCat. II with drop pin
Front HitchOptional
Rear lift (at ends)9800 lbs [4445 kg]
Rear lift (at ends)(optional)11500 lbs (Dyna-VT) [5216 kg]

Electrical System of Massey Ferguson, 7618

Battery volts12
GroundNegative
Ground(optional)240 (dual 120 option)
Ground(optional)175 (option)
Charging systemAlternator
Batteries2
Charging amps120

Where it sits

With 165 HP, the Massey Ferguson 7618 sits between 7616 (150 HP) and 7619 (170 HP) in Massey Ferguson's range. Its power puts it in the 80th percentile of 2010s models in our database (2476 machines).

Frequently asked questions

How much horsepower does the Massey Ferguson 7618 have?

The Massey Ferguson 7618 delivers 165 HP.

What years was the Massey Ferguson 7618 produced?

The Massey Ferguson 7618 was produced in 2013-2014.

What engine does the Massey Ferguson 7618 have?

The Massey Ferguson 7618 is powered by a Turbocharged air-to-air aftercooled diesel, 6-cylinder 24-valve engine.

What transmission does the Massey Ferguson 7618 use?

The Massey Ferguson 7618 uses a Dyna-6 transmission.

Is the Massey Ferguson 7618 4WD?

The Massey Ferguson 7618 is available in 4WD.

Compare the Massey Ferguson 7618 with another model