Massey Ferguson 8140
Power
161 hp[P] hp
Production
1995-1998
Engine
Turbocharged diesel, 6-cylinder
Transmission
Dynashift
Weight
14000 lbs [6350 kg]
Drive
2WD/4WD
From the same series:
Introduction
Production Information of Massey Ferguson, 8140
The production information of the tractor (8140) includes details about its manufacturing.
| Original price was $82,800 in 1998 |
| Row-Crop tractor |
| Built in France |
| Manufacturer | Massey Ferguson |
|---|
Dimension and Tires Information of Massey Ferguson, 8140
This section sums up the dimension and tires information of the tractor.
| 4WD Front tread | 61.4 to 90.5 inches [155 to 229 cm] |
|---|---|
| Wheelbase | 115 inches [292 cm] |
| Weight | 14000 lbs [6350 kg] |
| Height (cab) | 115 inches [292 cm] |
| Length | 215 inches [546 cm] |
| Rear tread | 60 to 118.6 inches [152 to 301 cm] |
| 2WD Front tread | 60.5 to 99.6 inches [153 to 252 cm] |
| Width | 94 inches [238 cm] |
| Ag front | 11.00-16 |
|---|---|
| Ag rear | 20.8R-38 |
Engine Specifications of Massey Ferguson, 8140
Get the specifications for the engine and if different options are available.
| Valmet 620DS |
| Liquid-cooled |
| Turbocharged diesel |
| 6-cylinder |
| Air cleaner | Dual dry element |
|---|---|
| Displacement | 403 ci [6.6 L] |
| Rated RPM | 2200 |
| Bore/Stroke | 4.25x4.72 inches [108 x 120 mm] |
| Coolant capacity | 28.4 qts [26.9 L] |
| Starter volts | 12 |
Transmission Information of Massey Ferguson, 8140Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Dynashift |
|---|---|
| Clutch | 230mm wet disc |
| Type | Four-speed power shift |
| Gears | 32 forward and reverse |
Mechanical Specs of Massey Ferguson, 8140Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| QuietView cab standard with air-conditioning. |
| Power steering |
| Hydraulic wet disc brakes |
Power Information of Massey Ferguson, 8140Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Engine RPM | 1000@2090 |
| Clutch | Electro-hydraulic |
| Rear PTO Type | 1000 |
Hydraulics Specifications of Massey Ferguson, 8140
Hydraulic system type, pressure, pump flow and valves.
| Type | Closed center load-sensing |
|---|---|
| Pump flow | 29.1 gpm [110.1 lpm] |
| Valves | 3 or 4 |
| Capacity | 19.8 gal [74.9 L] |
| Pressure | 2931 psi [202.1 bar] |
Three-Point Hitch of Massey Ferguson, 8140
Hitch category and rear/front lift capacity.
| Rear Type | III |
|---|---|
| Control | Electronic draft control |
| Rear lift (at ends) | 14445 lbs [6552 kg] |
Electrical System of Massey Ferguson, 8140
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Charging system | Alternator |
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Massey Ferguson 8140 have?
The Massey Ferguson 8140 delivers 161 hp[P] HP.
What years was the Massey Ferguson 8140 produced?
The Massey Ferguson 8140 was produced in 1995-1998.
What engine does the Massey Ferguson 8140 have?
The Massey Ferguson 8140 is powered by a Turbocharged diesel, 6-cylinder engine.
What transmission does the Massey Ferguson 8140 use?
The Massey Ferguson 8140 uses a Dynashift transmission.
How much does the Massey Ferguson 8140 weigh?
The Massey Ferguson 8140 weighs 14000 lbs [6350 kg].
Is the Massey Ferguson 8140 4WD?
The Massey Ferguson 8140 is available in 2WD/4WD.