
Minneapolis-Moline A4T-1600
Power
169 hp
Production
1970-1972
Engine
LP gas, 6-cylinder
Weight
19850 lbs [9003 kg]
Drive
4WD
Introduction
Production Information of Minneapolis-Moline, A4T-1600
The production information of the tractor (A4T-1600) includes details about its manufacturing.
| Four-wheel Drive (4WD) tractor |
| Built in Minneapolis, Minnesota, USA |
| Manufacturer | Minneapolis-Moline (a part of White) |
|---|
Dimension and Tires Information of Minneapolis-Moline, A4T-1600
This section sums up the dimension and tires information of the tractor.
| Rear axle | 3.25 inch diameter [82 mm] |
|---|---|
| Wheelbase | 120 inches [304 cm] |
| Height (exhaust) | 116 inches [294 cm] |
| Height (steering wheel) | 99 inches [251 cm] |
| Length | 234 inches [594 cm] |
| Operating weight | 19850 lbs [9003 kg] |
| Width | 96 inches [243 cm] |
| Ag rear | 23.1-30 |
|---|---|
| Ag front | 18.4-34 |
| 23.1-34 | |
| 24.5-32 | |
| Ag rear | 18.4-34 |
| 24.5-32 | |
| 18.4-38 | |
| Ag front | 23.1-30 |
| 18.4-38 | |
| 23.1-34 |
Engine Specifications of Minneapolis-Moline, A4T-1600
Get the specifications for the engine and if different options are available.
| Minneapolis-Moline |
| Liquid-cooled |
| LP gas |
| 6-cylinder |
| Coolant capacity | 30 qts [28.4 L] |
|---|---|
| Displacement | 504 ci [8.3 L] |
| Rated RPM | 2200 |
| Bore/Stroke | 4.625x5.00 inches [117 x 127 mm] |
| Coolant capacity | 33 qts [31.2 L] |
| Oil capacity | 14 qts [13.2 L] |
| Oil capacity | 13 qts [12.3 L] |
| Starter volts | 12 |
| Power | 169 hp [126.0 kW] |
Transmission Information of Minneapolis-Moline, A4T-1600Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Five gears (1-5) in two ranges (low/high). |
| Gears | 10 forward and 2 reverse |
|---|---|
| Clutch | 355.6mm dry disc |
Mechanical Specs of Minneapolis-Moline, A4T-1600Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Open operator station. Cab optional with heat. |
| Hydraulic dry disc brakes |
| Steering | Hydrostatic power |
|---|
Power Information of Minneapolis-Moline, A4T-1600Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 1000 |
| Engine RPM | 1000@1800 |
Hydraulics Specifications of Minneapolis-Moline, A4T-1600
Hydraulic system type, pressure, pump flow and valves.
| Pump flow | 17 gpm (open) [64.3 lpm] |
|---|---|
| Type | Open center |
| 2000 psi (closed) [137.9 bar] | |
| Pressure | 1750 psi (open) [120.7 bar] |
| Closed center OptOptional | |
| 20 gpm (closed) [75.7 lpm] | |
| Valves | 2 or 3 |
| Capacity | 8 gal [30.3 L] |
Three-Point Hitch of Minneapolis-Moline, A4T-1600
Hitch category and rear/front lift capacity.
| Rear Type | III/II |
|---|
Frequently asked questions
How much horsepower does the Minneapolis-Moline A4T-1600 have?
The Minneapolis-Moline A4T-1600 delivers 169 HP.
What years was the Minneapolis-Moline A4T-1600 produced?
The Minneapolis-Moline A4T-1600 was produced in 1970-1972.
What engine does the Minneapolis-Moline A4T-1600 have?
The Minneapolis-Moline A4T-1600 is powered by a LP gas, 6-cylinder engine.
How much does the Minneapolis-Moline A4T-1600 weigh?
The Minneapolis-Moline A4T-1600 weighs 19850 lbs [9003 kg].
Is the Minneapolis-Moline A4T-1600 4WD?
The Minneapolis-Moline A4T-1600 is available in 4WD.