Introduction
Production Information of Minneapolis-Moline, GT
The production information of the tractor (GT) includes details about its manufacturing.
| Standard-tread tractor |
| Built in Minneapolis, Minnesota, USA |
| Manufacturer | Minneapolis-Moline |
|---|---|
| Total built | 1,200 |
Dimension and Tires Information of Minneapolis-Moline, GT
This section sums up the dimension and tires information of the tractor.
| Front tread | 54.5 inches [138 cm] |
|---|---|
| Wheelbase | 84 inches [213 cm] |
| Height | 76 inches [193 cm] |
| 67 inches (steel wheels) [170 cm] | |
| Length | 136.5 inches [346 cm] |
| Ground clearance | 10 inches [25 cm] |
| Weight | 6800 lbs [3084 kg] |
| Width | 72 inches (tires) [182 cm] |
| Rear tread | 57.5 inches [146 cm] |
| Clearance (rear axle) | 21.5 inches [54 cm] |
| Clearance (front axle) | 13.5 inches [34 cm] |
| Shipping weight | 6,220 lbs [2821 kg] |
| Ag front | 7.50-18 |
|---|---|
| Ag rear | 50-12 (steel) |
| Ag rear | 12.75-32 |
| Ag front | 34-5.5 (steel) |
Engine Specifications of Minneapolis-Moline, GT
Get the specifications for the engine and if different options are available.
| Minneapolis-Moline GE |
| Liquid-cooled |
| Gasoline |
| 4-cylinder 8-valve |
| Coolant capacity | 28 qts [26.5 L] |
|---|---|
| Air cleaner | Oil bath |
| Rated RPM | 1075 |
| Starter | Hand-crank |
| Idle RPM | 400-1075 |
| Displacement | 403.2 ci [6.6 L] |
| Fuel system | Schebler TTX23 carburetor |
| Bore/Stroke | 4.625x6.00 inches [117 x 152 mm] |
| Oil capacity | 10 qts [9.5 L] |
| Starter volts | 6 |
| Electric optional |
Transmission Information of Minneapolis-Moline, GTY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Gear |
|---|---|
| Oil type | SAE 140 |
| Oil capacity | 52 qts [49.2 L] |
| Gears | 4 forward and 1 reverse |
| SAE 140 | |
| Clutch | Dry disc |
Mechanical Specs of Minneapolis-Moline, GTY
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station. |
| Mechanical band brakes |
| Steering | Manual worm-and-sector |
|---|
Power Information of Minneapolis-Moline, GTY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO Type | 526 (1.375) |
|---|
Three-Point Hitch of Minneapolis-Moline, GT
Hitch category and rear/front lift capacity.
| Drawbar | Heavy-duty swinging drawbar |
|---|
Frequently asked questions
How much horsepower does the Minneapolis-Moline GT have?
The Minneapolis-Moline GT delivers 60 hp[P] HP.
What years was the Minneapolis-Moline GT produced?
The Minneapolis-Moline GT was produced in 1938-1941.
What engine does the Minneapolis-Moline GT have?
The Minneapolis-Moline GT is powered by a Gasoline, 4-cylinder 8-valve engine.
What transmission does the Minneapolis-Moline GT use?
The Minneapolis-Moline GT uses a Gear transmission.
How much does the Minneapolis-Moline GT weigh?
The Minneapolis-Moline GT weighs 6800 lbs [3084 kg].
Is the Minneapolis-Moline GT 4WD?
The Minneapolis-Moline GT is available in 2WD.