Introduction
Production Information of Minneapolis-Moline, G450
The production information of the tractor (G450) includes details about its manufacturing.
| Utility tractor |
| Original price was $9,000 in 1975 |
| Manufacturer | Minneapolis-Moline |
|---|
Dimension and Tires Information of Minneapolis-Moline, G450
This section sums up the dimension and tires information of the tractor.
| 2WD Front tread | 52 to 79.5 inches [132 to 201 cm] |
|---|---|
| Wheelbase | 80.8 inches [205 cm] |
| Utility Width | 70 inches [177 cm] |
| 4WD Length | 127 inches [322 cm] |
| Utility Length | 122 inches [309 cm] |
| Utility Clearance (front axle) | 18.9 inches [48 cm] |
| Row-crop Width | 72 inches [182 cm] |
| Row-crop Length | 125 inches [317 cm] |
| Rear tread | 55.1 to 78.75 inches [139 to 200 cm] |
| 4WD Front tread | 55/59 inches [139/149 cm] |
| 4WD Clearance (front axle) | 11 inches [27 cm] |
| Row-crop Clearance (front axle) | 25.75 inches [65 cm] |
| 4WD Width | 72 inches [182 cm] |
| 2WD Ag rear | 14.9-30 |
|---|---|
| 2WD Ag front | 7.50-16 |
| 2WD Ag front | 6.00x16 |
| 4WD Ag rear | 16.9-30 |
| 4WD Ag front | 9.50x24 |
| 2WD Ag rear | 14.9-28 |
| 2WD Ag rear | 16.9-30 |
Engine Specifications of Minneapolis-Moline, G450
Get the specifications for the engine and if different options are available.
| Fiat |
| Liquid-cooled |
| Diesel |
| 4-cylinder |
| Starter volts | 12 |
|---|---|
| Displacement | 210.9 ci [3.5 L] |
| Pre-heating | Thermostart |
| Bore/Stroke | 3.94x4.33 inches [100 x 110 mm] |
| Coolant capacity | 14 qts [13.2 L] |
| Oil capacity | 12 qts [11.4 L] |
| Rated RPM | 2400 |
| Compression | 17:1 |
| Air cleaner | Oil bath |
Transmission Information of Minneapolis-Moline, G450Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Synchronized shifts between gears 3-4 and 7-8. |
| Type | Partially synchronized |
|---|---|
| Gears | 8 forward and 2 reverse |
| Oil capacity | 19 qts [18.0 L] |
Transmission variants 2
| Type | Creeper |
|---|---|
| Gears | 12 forward and 3 reverse |
| 8-speed partially synchronized |
| 12-speed creeper |
Mechanical Specs of Minneapolis-Moline, G450Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Open operator station. |
| Mechanical band brakes |
| Final drives | Planetary |
|---|
Power Information of Minneapolis-Moline, G450Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540/1000 |
| Engine RPM | 540@1970 |
Hydraulics Specifications of Minneapolis-Moline, G450
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Pump flow | 5.76 gpm [21.8 lpm] |
| Capacity | 4.5 gal [17.0 L] |
| Pressure | 2133 psi [147.1 bar] |
Three-Point Hitch of Minneapolis-Moline, G450
Hitch category and rear/front lift capacity.
| Rear Type | II/I |
|---|---|
| Control | Position and draft control |
| Rear lift | 3100 lbs [1406 kg] |
Electrical System of Minneapolis-Moline, G450
Battery voltage, charging system and ground.
| Charging system | Alternator |
|---|---|
| Charging amps | 42 |
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Minneapolis-Moline G450 have?
The Minneapolis-Moline G450 delivers 61 hp[P] HP.
What years was the Minneapolis-Moline G450 produced?
The Minneapolis-Moline G450 was produced in 1971-1975.
What engine does the Minneapolis-Moline G450 have?
The Minneapolis-Moline G450 is powered by a Diesel, 4-cylinder engine.
What transmission does the Minneapolis-Moline G450 use?
The Minneapolis-Moline G450 uses a Partially synchronized transmission.
Is the Minneapolis-Moline G450 4WD?
The Minneapolis-Moline G450 is available in 2WD/4WD.