Introduction
Production Information of Minneapolis-Moline, G350
The production information of the tractor (G350) includes details about its manufacturing.
| Utility tractor |
| Original price was $6,900 in 1975 |
| Manufacturer | Minneapolis-Moline |
|---|
Dimension and Tires Information of Minneapolis-Moline, G350
This section sums up the dimension and tires information of the tractor.
| 4WD Front tread | 55/59 inches [139/149 cm] |
|---|---|
| Wheelbase | 75.5 inches [191 cm] |
| 2WD Height (steering wheel) | 56.6 inches [143 cm] |
| Width | 62.5 inches*Minimum width [158 cm] |
| 2WD Length | 115 inches [292 cm] |
| 2WD Clearance (front axle) | 18.25 inches [46 cm] |
| 2WD Shipping weight | 3710 lbs [1682 kg] |
| 4WD Length | 119.5 inches [303 cm] |
| Rear tread | 47.25 to 74.75 inches [120 to 189 cm] |
| 2WD Front tread | 50.4 to 78 inches [128 to 198 cm] |
| 4WD Clearance (front axle) | 14 inches [35 cm] |
| 4WD Shipping weight | 4300 lbs [1950 kg] |
| 2WD Ag rear | 14.9-28 |
|---|---|
| 2WD Ag front | 6.00-16 |
| 2WD Ag front | 7.50-16 |
| 4WD Ag rear | 12.4-28 |
| 4WD Ag front | 7.50x20 |
| 2WD Ag rear | 12.4-28 |
| 2WD Ag rear | 13.6-28 |
Engine Specifications of Minneapolis-Moline, G350
Get the specifications for the engine and if different options are available.
| Fiat |
| Liquid-cooled |
| Diesel |
| 3-cylinder |
| Starter volts | 12 |
|---|---|
| Displacement | 158.1 ci [2.6 L] |
| Pre-heating | Thermostart |
| Bore/Stroke | 3.94x4.33 inches [100 x 110 mm] |
| Coolant capacity | 13.5 qts [12.8 L] |
| Oil capacity | 8 qts [7.6 L] |
| Rated RPM | 2400 |
| Compression | 17:1 |
| Air cleaner | Oil bath |
Transmission Information of Minneapolis-Moline, G350Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Synchronized shifts between gears 2-3 and 5-6. |
| Type | Partially synchronized |
|---|---|
| Oil capacity | 18 qts [17.0 L] |
| Gears | 6 forward and 2 reverse |
| Clutch | 254mm dry disc |
Transmission variants 2
| Type | Creeper |
|---|---|
| Gears | 9 forward and 3 reverse |
| 6-speed partially synchronized |
| 9-speed creeper |
Mechanical Specs of Minneapolis-Moline, G350Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Open operator station. |
| Mechanical band brakes |
| Final drives | Planetary |
|---|
Power Information of Minneapolis-Moline, G350Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Live *Dual-stage clutch |
|---|---|
| Rear PTO Type | 540/ground |
| Engine RPM | 540@1970 |
Hydraulics Specifications of Minneapolis-Moline, G350
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Pump flow | 5.76 gpm [21.8 lpm] |
| Capacity | 4.5 gal [17.0 L] |
| Pressure | 2133 psi [147.1 bar] |
Three-Point Hitch of Minneapolis-Moline, G350
Hitch category and rear/front lift capacity.
| Rear Type | II/I |
|---|---|
| Control | Position and draft control |
| Rear lift | 2660 lbs [1206 kg] |
Electrical System of Minneapolis-Moline, G350
Battery voltage, charging system and ground.
| Charging system | Alternator |
|---|---|
| Charging amps | 42 |
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Minneapolis-Moline G350 have?
The Minneapolis-Moline G350 delivers 45 hp[P] HP.
What years was the Minneapolis-Moline G350 produced?
The Minneapolis-Moline G350 was produced in 1971-1975.
What engine does the Minneapolis-Moline G350 have?
The Minneapolis-Moline G350 is powered by a Diesel, 3-cylinder engine.
What transmission does the Minneapolis-Moline G350 use?
The Minneapolis-Moline G350 uses a Partially synchronized transmission.
How much does the Minneapolis-Moline G350 weigh?
The Minneapolis-Moline G350 weighs 3710 lbs [1682 kg].
Is the Minneapolis-Moline G350 4WD?
The Minneapolis-Moline G350 is available in 2WD/4WD.