Introduction
Production Information of Minneapolis-Moline, Jet Star 3
The production information of the tractor (Jet Star 3) includes details about its manufacturing.
| Row-Crop tractor |
| Built in Minneapolis, Minnesota, USA |
| Manufacturer | Minneapolis-Moline |
|---|
Dimension and Tires Information of Minneapolis-Moline, Jet Star 3
This section sums up the dimension and tires information of the tractor.
| Clearance (rear axle) | 19.5 inches [49 cm] |
|---|---|
| Wheelbase | 87.125 inches [221 cm] |
| Height (exhaust) | 78.25 inches [198 cm] |
| Height (steering wheel) | 65.75 inches [167 cm] |
| Length | 126.25 inches [320 cm] |
| Front tread | 50 to 78 inches [127 to 198 cm] |
| Clearance (front axle) | 20 inches [50 cm] |
| Width | 70.25 inches [178 cm] |
| Rear tread | 56 to 84 inches [142 to 213 cm] |
| Ag front | 5.50-16 |
|---|---|
| Ag rear | 12.4-28 |
| Ag front | 7.50-16 |
Engine Specifications of Minneapolis-Moline, Jet Star 3
Get the specifications for the engine and if different options are available.
| Minneapolis-Moline |
| Liquid-cooled |
| LP gas |
| 4-cylinder |
| Oil capacity | 6 qts [5.7 L] |
|---|---|
| Displacement | 206 ci [3.4 L] |
| Rated RPM | 1750 |
| Bore/Stroke | 3.625x5.00 inches [92 x 127 mm] |
| Coolant capacity | 12 qts [11.4 L] |
| Starter volts | 12 |
| Firing order | 1-3-4-2 |
| Air cleaner | Oil bath |
Transmission Information of Minneapolis-Moline, Jet Star 3Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Ampli-Torc |
|---|---|
| Type | Two-speed power shift |
| Gears | 10 forward and 2 reverse |
Transmission variants 2
| Type | Gear |
|---|---|
| Gears | 5 forward and 1 reverse |
| 10-speed two-speed power shift |
| 5-speed gear |
Mechanical Specs of Minneapolis-Moline, Jet Star 3Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station. |
| Disc brakes |
| Steering | Manual |
|---|---|
| Steering | Power OptOptional |
Power Information of Minneapolis-Moline, Jet Star 3Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| 1000@1750 | |
| Engine RPM | 540@1525 |
| Rear PTO Type | 540 (1.375) |
| 1000 (1.375) |
Three-Point Hitch of Minneapolis-Moline, Jet Star 3
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Control | Draft control OptOptional |
Electrical System of Minneapolis-Moline, Jet Star 3
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| 2 (diesel) | |
| Charging system | Generator |
| Batteries | 1 (gas/LP) |
Frequently asked questions
How much horsepower does the Minneapolis-Moline Jet Star 3 have?
The Minneapolis-Moline Jet Star 3 delivers 48 hp[P] HP.
What years was the Minneapolis-Moline Jet Star 3 produced?
The Minneapolis-Moline Jet Star 3 was produced in 1964-1965.
What engine does the Minneapolis-Moline Jet Star 3 have?
The Minneapolis-Moline Jet Star 3 is powered by a LP gas, 4-cylinder engine.
What transmission does the Minneapolis-Moline Jet Star 3 use?
The Minneapolis-Moline Jet Star 3 uses a Ampli-Torc transmission.
Is the Minneapolis-Moline Jet Star 3 4WD?
The Minneapolis-Moline Jet Star 3 is available in 2WD.