Introduction
Production Information of Minneapolis-Moline, 335
The production information of the tractor (335) includes details about its manufacturing.
| Original price was $2,500 in 1961 |
| Row-Crop tractor |
| Built in Minneapolis, Minnesota, USA |
| Manufacturer | Minneapolis-Moline |
|---|---|
| 334 (industrial) | |
| Total built | 2,500 (utility) |
| 750 (Universal) |
Dimension and Tires Information of Minneapolis-Moline, 335
This section sums up the dimension and tires information of the tractor.
| 58.5 inches (utility) [148 cm] | |
| Wheelbase | 78.25 inches (tricycle) [198 cm] |
| Width | 58.75 inches (utility) [149 cm] |
| 113.5 inches (utility) [288 cm] | |
| 79 inches (utility) [200 cm] | |
| Clearance (rear axle) | 23 inches [58 cm] |
| Height | 67.6 inches (tricycle) [171 cm] |
| Length | 121.25 inches (tricyycle) [307 cm] |
| Rear tread | 48 to 76 inches [121 to 193 cm] |
| Front tread | 48 to 76 inches [121 to 193 cm] |
| Ag front | 5.50-16 |
|---|---|
| Ag rear | 13.9-36 |
| Ag rear | 12.4-36 |
| Ag front | 7.50-10 |
Engine Specifications of Minneapolis-Moline, 335
Get the specifications for the engine and if different options are available.
| Minneapolis-Moline 165A |
| Liquid-cooled vertical I-head |
| Gasoline |
| 4-cylinder |
| Firing order | 1-3-4-2 |
|---|---|
| Displacement | 165 ci [2.7 L] |
| Air cleaner | Oil bath |
| Bore/Stroke | 3.625x4.00 inches [92 x 102 mm] |
| Coolant capacity | 11 qts [10.4 L] |
| Starter volts | 6 |
| Rated RPM | 1600 |
| Compression | 7.35:1 |
| Power | 40 hp [29.8 kW] |
Transmission Information of Minneapolis-Moline, 335Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Unsynchronized gear |
|---|---|
| Gears | 5 forward and 1 reverse |
| Clutch | 254mm dry disc |
Transmission variants 2
| Transmission | Ampli-Torc |
|---|---|
| Clutch | Dry disc |
| Type | Two-speed power shift |
| Gears | 10 forward and 2 reverse |
| 5-speed unsynchronized gear |
| 10-speed two-speed power shift |
Mechanical Specs of Minneapolis-Moline, 335Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station. |
| Mechanical dry disc brakes |
| Power steering |
| Final drives | Bull gear |
|---|
Power Information of Minneapolis-Moline, 335Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Clutch | Wet disc |
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of Minneapolis-Moline, 335
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Pump flow | 10 gpm [37.9 lpm] |
| Steering flow | 2.5 gpm [9.5 lpm] |
Three-Point Hitch of Minneapolis-Moline, 335
Hitch category and rear/front lift capacity.
| Rear Type | I OptOptional |
|---|
Electrical System of Minneapolis-Moline, 335
Battery voltage, charging system and ground.
| Charging system | Generator |
|---|---|
| Battery volts | 6 |
Frequently asked questions
How much horsepower does the Minneapolis-Moline 335 have?
The Minneapolis-Moline 335 delivers 40 HP.
What years was the Minneapolis-Moline 335 produced?
The Minneapolis-Moline 335 was produced in 1956-1961.
What engine does the Minneapolis-Moline 335 have?
The Minneapolis-Moline 335 is powered by a Gasoline, 4-cylinder engine.
What transmission does the Minneapolis-Moline 335 use?
The Minneapolis-Moline 335 uses a Unsynchronized gear transmission.
Is the Minneapolis-Moline 335 4WD?
The Minneapolis-Moline 335 is available in 2WD.