Introduction
Production Information of New Holland, 4835
The production information of the tractor (4835) includes details about its manufacturing.
| Original price was $26,750 in 1999 |
| Utility tractor |
| Built in Italy |
| Manufacturer | New Holland |
|---|
Dimension and Tires Information of New Holland, 4835
This section sums up the dimension and tires information of the tractor.
| Rear tread | 60 to 84 inches [152 to 213 cm] |
|---|---|
| 2WD Wheelbase | 92.2 inches [234 cm] |
| 4WD Cab Shipping weight | 7056 lbs [3200 kg] |
| 2WD ROPS Shipping weight | 5954 lbs [2700 kg] |
| 4WD Wheelbase | 91.1 inches [231 cm] |
| Front tread | 56 to 84 inches [142 to 213 cm] |
| Width | 72.6 inches [184 cm] |
| Ag front | 7.50-16.6 |
|---|---|
| Ag rear | 16.9-30 |
Engine Specifications of New Holland, 4835
Get the specifications for the engine and if different options are available.
| Iveco 8045.06 |
| Liquid-cooled |
| Diesel |
| 4-cylinder 8-valve |
| 16.9 qts (cab) [16.0 L] | |
| Pre-heating | Thermostart |
| Rated RPM | 2500 |
| Torque RPM | 1500 |
| Torque | 48.6 lb-ft [65.9 Nm] |
| Displacement | 220 ci [3.6 L] |
| Power | 65 hp [48.5 kW] |
| Bore/Stroke | 3.937x4.527 inches [100 x 115 mm] |
| Coolant capacity | 14.8 qts (ROPS) [14.0 L] |
| Oil capacity | 12.4 qts [11.7 L] |
| Starter volts | 12 |
Transmission Information of New Holland, 4835Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four gears in three ranges, plus reverse. Gear shifts are synchronized. |
| Transmission | Synchro |
|---|---|
| Type | Partially synchronized |
| Gears | 12 forward and 4 reverse |
Transmission variants 2
| Four gears in three ranges with left-hand reverser. Gear and shuttle shifts are synchronized. |
| Transmission | Synchro Command |
|---|---|
| Type | Partiallly synchronized with sync shuttle |
| Gears | 12 forward and reverse |
Transmission variants 3
| Four gears in three ranges with two-speed power shift and left-hand reverser. The Dual Command provides push-button shifting to lower gear at each speed. |
| Transmission | Dual Command |
|---|---|
| Type | Partial power shift |
| Gears | 24 forward and 12 reverse |
| 12-speed partially synchronized |
| 12-speed partiallly synchronized with sync shuttle |
| 24-speed partial power shift |
Mechanical Specs of New Holland, 4835Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Two-post foldable ROPS. Cab optional with air-conditioning. |
| Power steering |
| Hydraulic wet disc brakes |
Power Information of New Holland, 4835Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Clutch | Electro-hydraulic wet disc |
| Rear PTO Type | 540 |
Hydraulics Specifications of New Holland, 4835
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Valves | 2 to 3 |
| Pump flow | 14.5 gpm [54.9 lpm] |
Three-Point Hitch of New Holland, 4835
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Control | Mechanical lower-link draft sensing |
| Rear lift (at 24"/610mm) | 5722 lbs [2595 kg] |
Electrical System of New Holland, 4835
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Cab Charging amps | 65 |
| Charging system | Alternator |
| ROPS Charging amps | 45 |
Frequently asked questions
How much horsepower does the New Holland 4835 have?
The New Holland 4835 delivers 65 HP.
What years was the New Holland 4835 produced?
The New Holland 4835 was produced in 1996-1999.
What engine does the New Holland 4835 have?
The New Holland 4835 is powered by a Diesel, 4-cylinder 8-valve engine.
What transmission does the New Holland 4835 use?
The New Holland 4835 uses a Synchro transmission.
How much does the New Holland 4835 weigh?
The New Holland 4835 weighs 7056 lbs [3200 kg].
Is the New Holland 4835 4WD?
The New Holland 4835 is available in 2WD/4WD.