New Holland 8260
Power
111 hp[P] hp
Production
1996-1999
Engine
6-cylinder
Transmission
Dual Command
Drive
2WD/4WD
From the same series:
Introduction
New Holland 8260 Row-Crop Tractor
The New Holland 8260 is a row-crop tractor produced between 1996 and 1999 in England. Designed for versatile agricultural operations, this machine offers both 2WD and optional MFWD 4WD configurations to suit various field conditions.
Engine Specifications
The tractor is powered by a 6-cylinder liquid-cooled engine with a displacement of 456 cubic inches (7.5 liters). It operates at a rated speed of 2200 RPM, with a compression ratio of 17.5:1. The engine cooling system capacity varies between 23.5 L for ROPS models and 25.5 L for cab models.
Transmission Options
The 8260 offers multiple transmission configurations, including the Dual Command and Range Command systems. The Dual Command provides 23 forward and 12 reverse gears with a partially synchronized mechanism. The Range Command, available in 17-speed (2WD) or 18-speed (4WD) versions, utilizes partial power shift technology to allow gear changes under load.
Hydraulics and Hitch
The hydraulic system features a closed-center load-sensing design, delivering a pump flow of 26 gpm (98.4 lpm) at a pressure of 2755 psi. It is equipped with 2 to 4 valves for implement operation. The rear hitch is a Category II type with a lift capacity of 8,500 lbs (3855 kg) measured at 24 inches behind the lift point.
Dimensions and Mechanical Features
The machine features hydrostatic power steering and differential hydraulic wet disc brakes. The wheelbase measures 108.3 inches for the 2WD model and 107.2 inches for the 4WD variant. The rear tread width is adjustable, ranging from approximately 151 to 230 cm depending on the configuration.
Conclusion
The New Holland 8260 is a robust, mid-range row-crop tractor suitable for a variety of farming tasks. With its multiple transmission options and significant hydraulic capacity, it serves as a reliable implement carrier for agricultural professionals.
Production Information of New Holland, 8260
- Row-Crop tractor
- Built in England
| Manufacturer | New Holland |
|---|---|
| Original price | $48,000 (1999) |
Dimension and Tires Information of New Holland, 8260
| Rear tread | 60.2 to 87.9 inches [152 to 223 cm (manual)] |
|---|---|
| Wheelbase | 108.3 inches (2WD) [275 cm] |
| Width | 84 inches (min) [213 cm] |
| Width(optional) | 182 inches (4WD) [462 cm] |
| Width(optional) | 107.2 inches (4WD) [272 cm] |
| Clearance (drawbar) | 15 inches [38 cm] |
| Clearance (front axle) | 23.1 inches (2WD) [58 cm] |
| Length | 180 inches (2WD) [457 cm] |
| Rear tread | 59.8 to 90.6 inches [151 to 230 cm (power)] |
| Front tread | 61.1 to 83.3 inches [155 to 211 cm (4WD)] |
| Front tread | 60.7 to 86.1 inches [154 to 218 cm (2WD)] |
| Front tread(optional) | 19 inches (4WD) [48 cm] |
| Standard tires (ag) | Front: 11.00-16. Rear: 18.4R38 (2WD) |
|---|---|
| Standard tires (ag)(optional) | Front: 14.9R28. Rear: 18.4R38 (4WD) |
Engine Specifications of New Holland, 8260
- Liquid-cooled
- 6-cylinder
| Coolant capacity | 24.8 qts (ROPS) [23.5 L] |
|---|---|
| Rated RPM | 2200 |
| Intake valve clearance | 0.016 inches (cold) [0.406 mm] |
| Operating RPM | 1500-2200 |
| Torque RPM | 1600 |
| Idle RPM | 700-2420 |
| Displacement | 456 ci [7.5 L] |
| Compression | 17.5:1 |
| Oil capacity | 20 qts [18.9 L] |
| Bore/Stroke | 4.5x5.0 inches [114 x 127 mm] |
| Starter power | 4.9 hp [3.7 kW] |
| Exhaust valve clearance | 0.018 inches (cold) [0.457 mm] |
| Starter volts | 12 |
| Firing order | 1-5-3-6-2-4 |
Transmission Information of New Holland, 8260
Transmission variants 1
- Four gears (1-4) in three ranges (A-C) with left-hand shuttle lever and push-button underdrive. Gear shifts may be made on the move with the clutch. The tractor must be stopped to shift range. The forward-reverse shuttle, and the push-button underdrive, may be performed on the move without the clutch. Reverse gears operate in underdrive only. Optional creeper doubles the available speeds to 46 forward and 24 reverse.
| Transmission | Dual Command |
|---|---|
| Oil capacity | 76.8 qts [72.7 L] |
| Clutch | Wet disc |
| Type | Partially synchronized |
| Gears | 23 forward and 12 reverse |
Transmission variants 2
- The 17-speed Range Command transmission was available with 2WD. Six gears (1-6) in three ranges (A-C) with left-hand shuttle lever. Push-button gear shifting on the move. To shift ranges, hold up or down gear shift button while pressing range shift button. Reverse is available in range B only. Optional creeper increases available speeds to 30 forward and 12 in reverse.
| Transmission | Range Command |
|---|---|
| Oil capacity | 94.8 qts [89.7 L] |
| Clutch | Wet disc |
| Type | Partial power shift |
| Gears | 17 forward and 6 reverse |
Transmission variants 3
- The 18-speed Range Command transmission was available with 4WD. Six gears (1-6) in three ranges (A-C) with left-hand shuttle lever. Push-button gear shifting on the move. To shift ranges, hold up or down gear shift button while pressing range shift button. Reverse is available in range B only. Optional creeper increases available speeds to 31 and 12.
| Transmission | Range Command |
|---|---|
| Oil capacity | 94.8 qts [89.7 L] |
| Clutch | Wet disc |
| Type | Partial power shift |
| Gears | 18 forward and 6 reverse |
- 23-speed partially synchronized
- 17-speed partial power shift
- 18-speed partial power shift
Mechanical Specs of New Holland, 8260
- Differential hydraulic wet disc brakes
- Two-post ROPS. Optional cab.
| Drive | 4x2 2WD |
|---|---|
| Steering | Hydrostatic power |
| Steering(optional) | 4x4 MFWD 4WD (optional) |
| Differential lock | Rear or front and rear (4WD) with push-button operation. Manual and automatic modes. (2WD) |
Power Information of New Holland, 8260
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540/1000 |
Hydraulics Specifications of New Holland, 8260
| Steering flow | 15.6 gpm [59.0 lpm] |
|---|---|
| Type | Closed center load sensing |
| Valves | 2 to 4 |
| Pressure | 2755 psi [190.0 bar] |
| Capacity | 23.7 gal (18-speed) [89.7 L] |
| Steering press. | 2465 psi [170.0 bar] |
| Pump flow | 26 gpm [98.4 lpm] |
| Pump flow(optional) | 19.2 gal (23-speed) [72.7 L] |
Three-Point Hitch of New Holland, 8260
| Rear Type | II |
|---|---|
| Rear lift (at 24"/610mm) | 8,500 lbs [3855 kg] |
Electrical System of New Holland, 8260
| Battery volts | 12 |
|---|---|
| Ground | Negative |
| Batteries | 2 |
| Batteries(optional) | 100 (with cab) |
| Charging system | Alternator |
| Battery CCA | 900 |
| Charging amps | 70 |
Where it sits
With 111 hp[P] HP, the New Holland 8260 sits between 8160 (100 HP) and TM125 (125 HP) in New Holland's range. Its power puts it in the 74th percentile of 1990s models in our database (2097 machines).
Frequently asked questions
How much horsepower does the New Holland 8260 have?
The New Holland 8260 delivers 111 hp[P] HP.
What years was the New Holland 8260 produced?
The New Holland 8260 was produced in 1996-1999.
What engine does the New Holland 8260 have?
The New Holland 8260 is powered by a 6-cylinder engine.
What transmission does the New Holland 8260 use?
The New Holland 8260 uses a Dual Command transmission.
Is the New Holland 8260 4WD?
The New Holland 8260 is available in 2WD/4WD.