New Holland 8160
Power
100 hp[P] hp
Production
1996-1999
Engine
6-cylinder
Transmission
Dual Command
Drive
2WD/4WD
From the same series:
Introduction
New Holland 8160 Row-Crop Tractor
The New Holland 8160 is a row-crop tractor produced in England between 1996 and 1999. Positioned as a versatile agricultural machine, it features a 100 horsepower engine and was designed for a wide range of farming operations, including tillage and transport.
Engine and Performance
The tractor is powered by a 7.5-liter, 6-cylinder liquid-cooled engine. It operates at a rated speed of 2200 RPM, with a torque peak at 1400 RPM. The engine features a compression ratio of 17.5:1, ensuring reliable power delivery for heavy-duty field tasks.
Transmission and Drivetrain
The 8160 offers multiple transmission configurations, including the 23-speed Dual Command (partially synchronized) and the 17 or 18-speed Range Command (partial power shift). These options allow for on-the-move gear shifting to maintain efficiency. The tractor is available in either 4x2 2WD or optional 4x4 MFWD configurations, supported by differential hydraulic wet disc brakes for controlled stopping power.
Hydraulics and Hitch
Equipped with a closed-center load-sensing hydraulic system, the machine provides a pump flow of 26 gpm (98.4 lpm) at a pressure of 2755 psi. The rear hitch is a Category II type with a lift capacity of 8,500 lbs (3855 kg) measured at 24 inches behind the lift point, enabling the handling of heavy implements.
Power Take-Off
The tractor is fitted with an independent rear PTO. It supports standard operating speeds of 540 and 1000 RPM, providing the necessary versatility to power various implements such as mowers, balers, or rotary tillers.
Conclusion
The New Holland 8160 is a robust and dependable tractor suitable for mixed-farming operations. Its combination of high-capacity hydraulics, multiple transmission choices, and reliable 6-cylinder engine makes it a well-regarded machine for farmers seeking a versatile tractor for diverse field applications.
Production Information of New Holland, 8160
- Row-Crop tractor
- Built in England
| Manufacturer | New Holland |
|---|---|
| Original price | $44,000 (1999) |
Dimension and Tires Information of New Holland, 8160
| Rear tread | 60.2 to 87.9 inches [152 to 223 cm (manual)] |
|---|---|
| Wheelbase | 108.3 inches (2WD) [275 cm] |
| Width | 84 inches (min) [213 cm] |
| Width(optional) | 182 inches (4WD) [462 cm] |
| Width(optional) | 107.2 inches (4WD) [272 cm] |
| Clearance (drawbar) | 15 inches [38 cm] |
| Clearance (front axle) | 23.1 inches (2WD) [58 cm] |
| Length | 180 inches (2WD) [457 cm] |
| Rear tread | 59.8 to 90.6 inches [151 to 230 cm (power)] |
| Front tread | 61.1 to 83.3 inches [155 to 211 cm (4WD)] |
| Front tread | 60.7 to 86.1 inches [154 to 218 cm (2WD)] |
| Front tread(optional) | 19 inches (4WD) [48 cm] |
| Standard tires (ag) | Front: 11.00-16. Rear: 18.4R38 (2WD) |
|---|---|
| Standard tires (ag)(optional) | Front: 14.9R28. Rear: 18.4R38 (4WD) |
Engine Specifications of New Holland, 8160
- Liquid-cooled
- 6-cylinder
| Coolant capacity | 24.8 qts (ROPS) [23.5 L] |
|---|---|
| Rated RPM | 2200 |
| Intake valve clearance | 0.016 inches (cold) [0.406 mm] |
| Operating RPM | 1500-2200 |
| Torque RPM | 1400 |
| Idle RPM | 700-2420 |
| Displacement | 456 ci [7.5 L] |
| Compression | 17.5:1 |
| Oil capacity | 20 qts [18.9 L] |
| Bore/Stroke | 4.5x5.0 inches [114 x 127 mm] |
| Starter power | 4.9 hp [3.7 kW] |
| Exhaust valve clearance | 0.018 inches (cold) [0.457 mm] |
| Starter volts | 12 |
| Firing order | 1-5-3-6-2-4 |
Transmission Information of New Holland, 8160
Transmission variants 1
- Four gears (1-4) in three ranges (A-C) with left-hand shuttle lever and push-button underdrive. Gear shifts may be made on the move with the clutch. The tractor must be stopped to shift range. The forward-reverse shuttle, and the push-button underdrive, may be performed on the move without the clutch. Reverse gears operate in underdrive only. Optional creeper doubles the available speeds to 46 forward and 24 reverse.
| Transmission | Dual Command |
|---|---|
| Oil capacity | 76.8 qts [72.7 L] |
| Clutch | Wet disc |
| Type | Partially synchronized |
| Gears | 23 forward and 12 reverse |
Transmission variants 2
- The 17-speed Range Command transmission was available with 2WD. Six gears (1-6) in three ranges (A-C) with left-hand shuttle lever. Push-button gear shifting on the move. To shift ranges, hold up or down gear shift button while pressing range shift button. Reverse is available in range B only. Optional creeper increases available speeds to 30 forward and 12 in reverse.
| Transmission | Range Command |
|---|---|
| Oil capacity | 94.8 qts [89.7 L] |
| Clutch | Wet disc |
| Type | Partial power shift |
| Gears | 17 forward and 6 reverse |
Transmission variants 3
- The 18-speed Range Command transmission was available with 4WD. Six gears (1-6) in three ranges (A-C) with left-hand shuttle lever. Push-button gear shifting on the move. To shift ranges, hold up or down gear shift button while pressing range shift button. Reverse is available in range B only. Optional creeper increases available speeds to 31 and 12.
| Transmission | Range Command |
|---|---|
| Oil capacity | 94.8 qts [89.7 L] |
| Clutch | Wet disc |
| Type | Partial power shift |
| Gears | 18 forward and 6 reverse |
- 23-speed partially synchronized
- 17-speed partial power shift
- 18-speed partial power shift
Mechanical Specs of New Holland, 8160
- Differential hydraulic wet disc brakes
- Two-post ROPS. Optional cab.
| Drive | 4x2 2WD |
|---|---|
| Steering | Hydrostatic power |
| Steering(optional) | 4x4 MFWD 4WD (optional) |
| Differential lock | Rear or front and rear (4WD) with push-button operation. Manual and automatic modes. (2WD) |
Power Information of New Holland, 8160
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540/1000 |
Hydraulics Specifications of New Holland, 8160
| Steering flow | 15.6 gpm [59.0 lpm] |
|---|---|
| Type | Closed center load sensing |
| Valves | 2 to 4 |
| Pressure | 2755 psi [190.0 bar] |
| Capacity | 23.7 gal (18-speed) [89.7 L] |
| Steering press. | 2465 psi [170.0 bar] |
| Pump flow | 26 gpm [98.4 lpm] |
| Pump flow(optional) | 19.2 gal (23-speed) [72.7 L] |
Three-Point Hitch of New Holland, 8160
| Rear Type | II |
|---|---|
| Rear lift (at 24"/610mm) | 8,500 lbs [3855 kg] |
Electrical System of New Holland, 8160
| Battery volts | 12 |
|---|---|
| Ground | Negative |
| Batteries | 2 |
| Batteries(optional) | 100 (with cab) |
| Charging system | Alternator |
| Battery CCA | 900 |
| Charging amps | 70 |
Where it sits
With 100 hp[P] HP, the New Holland 8160 sits just below 8260 (111 HP) in New Holland's range. Its power puts it in the 69th percentile of 1990s models in our database (2097 machines).
Frequently asked questions
How much horsepower does the New Holland 8160 have?
The New Holland 8160 delivers 100 hp[P] HP.
What years was the New Holland 8160 produced?
The New Holland 8160 was produced in 1996-1999.
What engine does the New Holland 8160 have?
The New Holland 8160 is powered by a 6-cylinder engine.
What transmission does the New Holland 8160 use?
The New Holland 8160 uses a Dual Command transmission.
Is the New Holland 8160 4WD?
The New Holland 8160 is available in 2WD/4WD.