New Holland TN65 tractor

New Holland TN65

Power

57 hp

Production

1998-2003

Engine

Diesel, 3-cylinder

Transmission

Gear

Drive

2WD/4WD

From the same series:

TN55
TN70

Introduction

New Holland TN65 Utility Tractor

The New Holland TN65 is a utility tractor produced between 1998 and 2003 as part of the TN series, manufactured in Jesi, Italy. It is designed for versatile agricultural applications and is available in both two-wheel drive and four-wheel drive configurations.

Engine Specifications

The tractor is powered by an Iveco 8035.05R liquid-cooled, three-cylinder diesel engine. With a displacement of 179 cubic inches (2.9 liters), it generates a gross power of 57 hp (42.5 kW) and a net power of 53 hp (39.5 kW) at a rated speed of 2300 RPM. The engine produces 162 lb-ft (219.7 Nm) of torque at 1400 RPM, with a compression ratio of 18:1.

Transmission and Drivetrain

The TN65 offers several transmission configurations to suit different operational needs. Options range from a basic 8-speed gear transmission to more advanced setups like the Synchro Command and Synchro Command Plus, providing up to 16 forward and reverse speeds. The Dual Command transmission option features a 32-speed configuration with a two-speed power shift. Depending on the model, tractors are equipped with either dry disc or wet disc clutches and mechanical or power shuttles.

Hydraulics and PTO

The hydraulic system utilizes an open-center design with a standard pump flow of 12.4 gpm (46.9 lpm) and a system pressure of 2755 psi (190.0 bar). Rear lift capacity is rated at 3962 lbs (1797 kg) at 24 inches behind the hitch point. The independent rear PTO operates at 540 RPM and utilizes a 1.375-inch shaft.

Dimensions and Operator Environment

The chassis is available with a two-post folding ROPS or an optional factory cab. Steering is power-assisted, and braking is handled by differential hydraulic wet disc brakes. The wheelbase varies by configuration, measuring 81.5 inches for the 2WD ROPS model and up to 83.5 inches for the 4WD SuperSteer version, with an overall length of 155 inches.

Conclusion

The New Holland TN65 is a capable utility tractor suited for varied farming tasks, offering a wide range of transmission and hydraulic configurations to match specific implement requirements and operator preferences.

Production Information of New Holland, TN65

  • Utility tractor
  • Built in Jesi, Italy
ManufacturerNew Holland

Dimension and Tires Information of New Holland, TN65

Width67.2 inches [170 cm]
2WD ROPS Wheelbase81.5 inches [207 cm]
4WD SuperSteer Wheelbase83.5 inches [212 cm]
4WD Cab Wheelbase81.3 inches [206 cm]
2WD Cab Wheelbase83.9 inches [213 cm]
Length155 inches [393 cm]
4WD ROPS Wheelbase78.9 inches [200 cm]

Minimum width

2WD Standard tires (ag)Front: 7.50-16. Rear: 14.9-28
4WD Standard tires (ag)Front: 8.3-24. Rear: 14.9-28

Engine Specifications of New Holland, TN65

  • Iveco 8035.05R
  • Liquid-cooled
  • 3-cylinder
  • Diesel
Power (gross)57 hp [42.5 kW]
Rated RPM2300
Displacement179 ci [2.9 L]
Bore/Stroke4.094x4.528 inches [104 x 115 mm]
Power (net)53 hp [39.5 kW]
Compression18:1
Air cleanerDual paper elements
Starter volts12
Torque RPM1400
Torque162 lb-ft [219.7 Nm]

Transmission Information of New Holland, TN65

Transmission variants 1

  • Four gears (1-4) in two ranges (A/B) with mechanical shuttle. Non-synchronized transmission, available only on the base TN65 model.
TypeGear
Gears8 forward and reverse
Clutch280mm dry disc

Transmission variants 2

  • Four synchronized gears (1-4) in two ranges (A/B). Available as either mechanical shuttle or power shuttle.
TransmissionSynchro Command
Transmission(optional)Wet disc (power shuttle)
ClutchDry disc (mechanical shuttle)
TypePartially synchronized
Gears8 forward and reverse

Transmission variants 3

  • Four synchronized gears (1-4) in four ranges (A-D). Available as either mechanical shuttle or power shuttle. Standard transmission on the TN55D and TN55S.
TransmissionSynchro Command Plus
Transmission(optional)Wet disc (power shuttle)
ClutchDry disc (mechanical shuttle)
TypePartially synchronized
Gears16 forward and reverse

Transmission variants 4

  • Four synchronized gears (1-4) in four ranges (A-D) with two-speed push-button power shift. Left-hand power shuttle.
TransmissionDual Command
ClutchWet discs
TypeTwo-speed power shift
Gears32 forward and 16 reverse
  • 8-speed gear
  • 32-speed two-speed power shift
  • 8-speed partially synchronized
  • 16-speed partially synchronized

Mechanical Specs of New Holland, TN65

  • Two- or four-wheel drive
  • Two-post folding ROPS. Cab optional.
  • Differential hydraulic wet disc brakes
  • Power steering
Final drivesPlanetary

Power Information of New Holland, TN65

Rear PTOIndependent
ClutchDry disc
Rear PTO Type540 (1.375)

Hydraulics Specifications of New Holland, TN65

Steering flow7.2 gpm [27.3 lpm]
TypeOpen center
Pump flow12.4 gpm [46.9 lpm]
Valves1 to 3
Capacity11.1 gal [42.0 L]
Capacity(optional)9.2 gpm [34.8 lpm]
Capacity(optional)16.9 gpm [64.0 lpm]
Pressure2755 psi [190.0 bar]

With power shuttle transmission option.

Three-Point Hitch of New Holland, TN65

Rear TypeII
Rear lift (at 24"/610mm)3962 lbs [1797 kg]

Electrical System of New Holland, TN65

GroundNegative
Battery CCA730
Cab Charging amps65
Charging systemAlternator
Battery volts12
ROPS Charging amps45

Where it sits

With 57 HP, the New Holland TN65 sits between TN55 (53 HP) and TN70 (69 HP) in New Holland's range. Its power puts it in the 35th percentile of 1990s models in our database (2097 machines).

Frequently asked questions

How much horsepower does the New Holland TN65 have?

The New Holland TN65 delivers 57 HP.

What years was the New Holland TN65 produced?

The New Holland TN65 was produced in 1998-2003.

What engine does the New Holland TN65 have?

The New Holland TN65 is powered by a Diesel, 3-cylinder engine.

What transmission does the New Holland TN65 use?

The New Holland TN65 uses a Gear transmission.

Is the New Holland TN65 4WD?

The New Holland TN65 is available in 2WD/4WD.

Compare the New Holland TN65 with another model