Introduction
New Holland TN60A Utility Tractor
The New Holland TN60A is a utility tractor produced between 2004 and 2008 at the manufacturing facility in Jesi, Italy. Designed for agricultural operations, this model is part of the TN series and offers configurations for both two-wheel and four-wheel drive.
Engine and Performance
The tractor is powered by a 2.9-liter, 3-cylinder Iveco liquid-cooled diesel engine. It delivers a net power of 57 hp (41.0 kW) at a rated speed of 2300 RPM. The engine produces 148 lb-ft (200.7 Nm) of torque and complies with Tier 2 emission standards. It features dual paper element air cleaners and a 12-volt starting system.
Transmission Options
The TN60A provides multiple transmission configurations to suit operational requirements. Options include an 8-speed constant mesh transmission with a mechanical shuttle, as well as 12-speed and 16-speed Synchro Command or Synchro Command Plus transmissions. Depending on the configuration, the tractor uses either a dry cerametallic clutch or a wet organic disc clutch for the power shuttle models.
Hydraulics and Hitch
The hydraulic system utilizes an open-center design with a standard pump flow of 12.4 gpm (46.9 lpm), with optional configurations providing up to 16.9 gpm (64.0 lpm). The system operates at a pressure of 2755 psi (190.0 bar) and supports 1 to 4 valves. The rear hitch is a Category II/I type, capable of a lift capacity of 3960 lbs (1796 kg) measured at 24 inches behind the lift point.
Mechanical and Dimensions
The machine is equipped with hydrostatic power steering and differential wet disc brakes. The mechanical rear differential lock enhances traction in challenging conditions. The tractor features a ROPS structure with an optional canopy. Dimensions vary by drive type, with a wheelbase of 81.5 inches for the 2WD model and 78.9 inches for the 4WD version.
Conclusion
The New Holland TN60A is a versatile utility tractor suitable for a variety of farming tasks, offering a balance of engine performance, hydraulic capacity, and transmission flexibility. Its range of configurations makes it adaptable to both general field work and specific agricultural requirements.
Production Information of New Holland, TN60A
- Utility tractor
- Built in Jesi, Italy
| Manufacturer | New Holland |
|---|
Dimension and Tires Information of New Holland, TN60A
| 2WD, 78.9 4WD} Wheelbase | 81.5 inches [207 cm] |
|---|---|
| Height (ROPS) | 95.1 inches [241 cm] |
| Width | 67.2 inches [170 cm] |
| 4WD Length | 151.6 inches [385 cm] |
| Height (Folded ROPS) | 75.1 inches [190 cm] |
| 2WD Length | 153.3 inches [389 cm] |
| 2WD Ag front | 9.5x15 |
|---|---|
| 4WD Ag front | 11.2x20 |
| Ag rear | 14.9 |
Engine Specifications of New Holland, TN60A
- Iveco
- Liquid-cooled
- Diesel
- 3-cylinder
| Starter | Electric |
|---|---|
| Torque RPM | 1400 |
| Power (net) | 55 hp [41.0 kW] |
| Starter volts | 12 |
| Fuel use | 3.00 gal/hour [11.4 l/hour] |
| Air cleaner | Dual paper elements |
| Power (gross) | 57 hp [42.5 kW] |
| Displacement | 179 ci [2.9 L] |
| Emissions | Tier 2 |
| Bore/Stroke | 4.094x4.528 inches [104 x 115 mm] |
| Torque | 148 lb-ft [200.7 Nm] |
| Rated RPM | 2300 |
| Compression | 17:1 |
Transmission Information of New Holland, TN60A
Transmission variants 1
- Left-hand mechanical shuttle required clutching.
| Type | Constant mesh with mechanical shuttle |
|---|---|
| Gears | 8 forward and reverse |
| Clutch | 280mm dry cerametallic plate |
Transmission variants 2
- Four synchronized gears in three ranges. Left-hand mechanical shuttle requires clutching.
| Transmission | Synchro Command |
|---|---|
| Clutch | 280mm dry cerametallic plate |
| Type | Partially synchronized with mechanical shuttle |
| Gears | 12 forward and reverse |
Transmission variants 3
- Left-hand mechanical shuttle requires clutching.
| Transmission | Synchro Command Plus |
|---|---|
| Clutch | 280mm dry cerametallic plate |
| Type | Partially synchronized with mechanical shuttle |
| Gears | 16 forward and reverse |
Transmission variants 4
- Clutchless left-hand power shuttle.
| Transmission | Synchro Command Plus |
|---|---|
| Clutch | Six 113mm wet organic discs |
| Type | Partially synchronized with power shuttle |
| Gears | 16 forward and reverse |
- 8-speed constant mesh with mechanical shuttle
- 16-speed partially synchronized with power shuttle
- 12-speed partially synchronized with mechanical shuttle
- 16-speed partially synchronized with mechanical shuttle
Mechanical Specs of New Holland, TN60A
- Two- or four-wheel drive
- ROPS. Canopy optional.
- Differential wet disc brakes
| Differential lock | Mechanical rear |
|---|---|
| Steering | Hydrostatic power |
Power Information of New Holland, TN60A
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of New Holland, TN60A
| Type | Open center |
|---|---|
| Type(optional) | 16.9 gpm [64.0 lpm] |
| Pump flow | 12.4 gpm [46.9 lpm] |
| Pressure | 2755 psi [190.0 bar] |
| Steering flow | 7.2 gpm [27.3 lpm] |
| Valves | 1 to 4 |
Three-Point Hitch of New Holland, TN60A
| Rear Type | II/I |
|---|---|
| Rear lift (at 24"/610mm) | 3960 lbs [1796 kg] |
Electrical System of New Holland, TN60A
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 730 |
| Charging system | Alternator |
| Charging amps | 65 |
Where it sits
With 57 HP, the New Holland TN60A sits between TN55 (53 HP) and T4020 (64 HP) in New Holland's range. Its power puts it in the 37th percentile of 2000s models in our database (2822 machines).
Frequently asked questions
How much horsepower does the New Holland TN60A have?
The New Holland TN60A delivers 57 HP.
What years was the New Holland TN60A produced?
The New Holland TN60A was produced in 2004-2008.
What engine does the New Holland TN60A have?
The New Holland TN60A is powered by a Diesel, 3-cylinder engine.
What transmission does the New Holland TN60A use?
The New Holland TN60A uses a Constant mesh with mechanical shuttle transmission.
Is the New Holland TN60A 4WD?
The New Holland TN60A is available in 2WD/4WD.