New Holland Workmaster 25
Power
24 hp
Production
2018+
Engine
Diesel, 3-cylinder
Transmission
Sync shuttle
Weight
2469 lbs [1119 kg]
Drive
4WD
From the same series:
Introduction
Production Information of New Holland, Workmaster 25
The production information of the tractor (Workmaster 25) includes details about its manufacturing.
| Compact Utility tractor |
| Original price was $15,259 in 2019 |
| Manufacturer | New Holland |
|---|
Dimension and Tires Information of New Holland, Workmaster 25
This section sums up the dimension and tires information of the tractor.
| Flange rear axle |
| Front tread | 45.6 inches [115 cm] |
|---|---|
| Wheelbase | 65.9 inches [167 cm] |
| Weight | 2469 lbs [1119 kg] |
| Height (ROPS) | 88.2 inches [224 cm] |
| Length | 117.2 inches [297 cm] |
| Rear tread | 50.5 inches [128 cm] |
| Width | 54.1 inches [137 cm] |
| Industrial front | 25x8.50-14 |
|---|---|
| Industrial rear | 43x16.00-230 |
Engine Specifications of New Holland, Workmaster 25
Get the specifications for the engine and if different options are available.
| Liquid-cooled |
| Diesel |
| 3-cylinder |
| Starter | Electric |
|---|---|
| Displacement | 80.4 ci [1.3 L] |
| Power (gross) | 24.4 hp [18.2 kW] |
| Bore/Stroke | 3.07x3.62 inches [78 x 92 mm] |
| Starter volts | 12 |
| Rated RPM | 2500 |
| Pre-heating | Glow plugs |
| Emissions | Tier IV |
Transmission Information of New Holland, Workmaster 25Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four gears in three ranges with synchronized shuttle shift. |
| Type | Sync shuttle |
|---|---|
| Gears | 12 forward and reverse |
Transmission variants 2
| Type | Hydrostatic |
|---|---|
| Gears | Infinite forward and reverse (3-range) |
| 12-speed sync shuttle |
| Hydrostatic |
Mechanical Specs of New Holland, Workmaster 25Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Two-post folding ROPS. |
| Wet disc brakes |
| Power steering |
| Differential lock | Mechanical rear |
|---|
Power Information of New Holland, Workmaster 25Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Mid PTO Type | 2000 |
| Mid PTO | Independent *Mid PTO standard with hydrostatic transmission, optional with gear transmission. |
| Clutch | Electro-hydraulic |
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of New Holland, Workmaster 25
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Steering flow | 4.6 gpm [17.4 lpm] |
| Total flow | 12.5 gpm [47.3 lpm] |
| Valves | 1 or 2 |
| Pump flow | 7.9 gpm [29.9 lpm] |
Three-Point Hitch of New Holland, Workmaster 25
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Rear lift (at 24"/610mm) | 1433 lbs [650 kg] |
| Control | Position control |
| Rear lift (at ends) | 1808 lbs [820 kg] |
Electrical System of New Holland, Workmaster 25
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 660 |
| Charging system | Alternator |
| Battery AH | 80 |
| Charging amps | 50 |
Frequently asked questions
How much horsepower does the New Holland Workmaster 25 have?
The New Holland Workmaster 25 delivers 24 HP.
What years was the New Holland Workmaster 25 produced?
The New Holland Workmaster 25 was produced in 2018+.
What engine does the New Holland Workmaster 25 have?
The New Holland Workmaster 25 is powered by a Diesel, 3-cylinder engine.
What transmission does the New Holland Workmaster 25 use?
The New Holland Workmaster 25 uses a Sync shuttle transmission.
How much does the New Holland Workmaster 25 weigh?
The New Holland Workmaster 25 weighs 2469 lbs [1119 kg].
Is the New Holland Workmaster 25 4WD?
The New Holland Workmaster 25 is available in 4WD.