New Holland Workmaster 25S
Power
24 hp
Production
2018+
Engine
Diesel, 3-cylinder
Transmission
Hydrostatic
Weight
1444 lbs [654 kg]
Drive
4WD
From the same series:
Introduction
Production Information of New Holland, Workmaster 25S
The production information of the tractor (Workmaster 25S) includes details about its manufacturing.
| Built in South Korea |
| Sub-Compact Utility tractor |
| Distributor | New Holland (a part of CNH) |
|---|---|
| Manufacturer | LS |
Dimension and Tires Information of New Holland, Workmaster 25S
This section sums up the dimension and tires information of the tractor.
| Flange rear axle |
| Front tread | 36.1 inches [91 cm] |
|---|---|
| Wheelbase | 56.1 inches [142 cm] |
| Weight | 1444 lbs [654 kg] |
| Height (ROPS) | 87.4 inches [221 cm] |
| Length | 97.4 inches [247 cm] |
| Rear tread | 34.6 inches [87 cm] |
| Width | 46.7 inches [118 cm] |
| Lawn/turf front | 18x8.50-10 |
|---|---|
| Industrial rear | 26x12.00-12 |
| Lawn/turf rear | 26x12.00-12 |
| Industrial front | 18x8.50-10 |
Engine Specifications of New Holland, Workmaster 25S
Get the specifications for the engine and if different options are available.
| Yanmar 3TNV80F |
| Liquid-cooled |
| Diesel |
| 3-cylinder |
| Starter | Electric |
|---|---|
| Displacement | 77.2 ci [1.3 L] |
| Power (gross) | 24.7 hp [18.4 kW] |
| Bore/Stroke | 3.15x3.30 inches [80 x 84 mm] |
| Starter volts | 12 |
| Rated RPM | 3000 |
| Pre-heating | Glow plugs |
| Emissions | Tier IV |
Transmission Information of New Holland, Workmaster 25SY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Hydrostatic |
|---|---|
| Gears | Infinite forward and reverse (2-range) |
Mechanical Specs of New Holland, Workmaster 25SY
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Two-post folding ROPS. |
| Wet disc brakes |
| Power steering |
| Differential lock | Mechanical rear |
|---|
Power Information of New Holland, Workmaster 25SY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Mid PTO Type | 2500 |
| Mid PTO | Independent |
| Clutch | Electro-hydraulic |
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of New Holland, Workmaster 25S
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Steering flow | 2.1 gpm [7.9 lpm] |
| Total flow | 6.7 gpm [25.4 lpm] |
| Valves | 1 OptOptional |
| Pump flow | 4.6 gpm [17.4 lpm] |
Three-Point Hitch of New Holland, Workmaster 25S
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Rear lift (at ends) | 992 lbs [449 kg] |
| Rear lift (at 24"/610mm) | 728 lbs [330 kg] |
Electrical System of New Holland, Workmaster 25S
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 430 |
| Charging system | Alternator |
| Battery AH | 45 |
| Charging amps | 40 |
Frequently asked questions
How much horsepower does the New Holland Workmaster 25S have?
The New Holland Workmaster 25S delivers 24 HP.
What years was the New Holland Workmaster 25S produced?
The New Holland Workmaster 25S was produced in 2018+.
What engine does the New Holland Workmaster 25S have?
The New Holland Workmaster 25S is powered by a Diesel, 3-cylinder engine.
What transmission does the New Holland Workmaster 25S use?
The New Holland Workmaster 25S uses a Hydrostatic transmission.
How much does the New Holland Workmaster 25S weigh?
The New Holland Workmaster 25S weighs 1444 lbs [654 kg].
Is the New Holland Workmaster 25S 4WD?
The New Holland Workmaster 25S is available in 4WD.