Introduction
Oliver 1655 Row-Crop Tractor
The Oliver 1655 is a row-crop tractor produced between 1969 and 1975. Part of the Oliver line, which later became integrated into the White brand, this model was designed to serve as a versatile utility tractor for medium-to-large scale agricultural operations.
Engine and Performance
The tractor is powered by a liquid-cooled Waukesha-Oliver 6-cylinder gasoline engine with a displacement of 4.3 liters (265 cubic inches). It features a bore and stroke of 95 mm by 102 mm and operates at a rated speed of 2200 RPM. With a compression ratio of 8.5:1, the engine delivers approximately 77 horsepower, providing sufficient torque for demanding field tasks.
Transmission and Drivetrain
The 1655 offers two primary transmission options: a standard 6-speed helical gear transmission or the advanced Hydraul-Shift transmission. The latter functions as a partial power shift system, providing 18 forward and 6 reverse gears by allowing the operator to shift on the move between over, direct, and under-drive ranges for each gear. The machine is available in both two-wheel and four-wheel drive configurations.
Hydraulics and PTO
The hydraulic system utilizes an open-center design with a total capacity of 53 liters (14 gallons), supporting between 2 and 4 valves for implement operation. The independent rear power take-off (PTO) provides dual-speed capability, offering both 540 and 1000 RPM settings to accommodate various agricultural implements. The rear hitch is a Category II/I type, equipped with lower-link draft control for precise implement depth management.
Operator Environment and Dimensions
The tractor features an open operator station as standard, with an optional cab equipped with a heater for improved operator comfort in varied climates. It is equipped with power steering and disc brakes for enhanced maneuverability and safety. The wheelbase for the 2WD model is 252 cm, while the 4WD version features a wheelbase of 208 cm. Adjustable rear tread widths ranging from 143 cm to 227 cm allow the tractor to be configured for specific row spacings.
Conclusion
The Oliver 1655 is a durable and mechanically flexible tractor, well-suited for farmers requiring a machine capable of handling diverse row-crop applications. Its Hydraul-Shift transmission and dual-speed PTO make it a practical choice for operators prioritizing efficiency and implement compatibility.
Production Information of Oliver, 1655
- The optional Hydraul-Shift transmission allows the operator to shift on the move to an over- or under-drive for each drive gear.
- Row-Crop tractor
- Original price was $10,000 in 1975
| Manufacturer | Oliver (a part of White) |
|---|
Dimension and Tires Information of Oliver, 1655
| 4WD Front tread | 60/70.75 inches [152/179 cm] |
|---|---|
| 2WD Wheelbase | 99.25 inches [252 cm] |
| Width | 81.5 inches [207 cm] |
| 4WD Length | 145.5 inches [369 cm] |
| 4WD Wheelbase | 82.125 inches [208 cm] |
| Rear tread | 56.5 to 89.5 inches [143 to 227 cm] |
| 2WD Front tread | 61.5 to 87.5 inches [156 to 222 cm] |
| 2WD Length | 154.5 inches [392 cm] |
| Ag front | 7.50-16 |
|---|---|
| Ag front(optional) | 7.50-15 |
| Ag front(optional) | 6.50-16 |
| Ag rear | 18.4-34 |
| Ag rear | 12.4-38 |
| Ag rear(optional) | 7.50-18 |
| Ag front | 6.00-16 |
| Ag front(optional) | 16.9-38 |
| Ag front(optional) | 14.9-38 |
| Ag front(optional) | 13.6-38 |
| Ag front(optional) | 11.00L-15 |
Engine Specifications of Oliver, 1655
- Waukesha-Oliver
- Liquid-cooled
- Gasoline
- 6-cylinder
| Starter volts | 12 |
|---|---|
| Displacement | 265 ci [4.3 L] |
| Compression | 8.5:1 |
| Bore/Stroke | 3.75x4.00 inches [95 x 102 mm] |
| Coolant capacity | 20 qts [18.9 L] |
| Oil capacity | 8 qts [7.6 L] |
| Firing order | 1-5-3-6-2-4 |
| Rated RPM | 2200 |
| Air cleaner | Dry |
Transmission Information of Oliver, 1655
Transmission variants 1
- The Hydraul-Shift transmission allows a three-speed power shift between over, direct, and under drive for each gear.
| Transmission | Hydraul-Shift |
|---|---|
| Clutch | 304.8mm dry disc |
| Type | Partial power shift |
| Gears | 18 forward and 6 reverse |
Transmission variants 2
| Type | Helical gear |
|---|---|
| Oil capacity | 32 qts [30.3 L] |
| Gears | 6 forward and 2 reverse |
| Clutch | 304.8mm dry disc |
- 18-speed partial power shift
- 6-speed helical gear
Mechanical Specs of Oliver, 1655
- Two- or four-wheel drive
- Open operator station. Cab optional with available heater.
- Power steering
- Disc brakes
Power Information of Oliver, 1655
| Rear PTO | Independent |
|---|---|
| Rear PTO(optional) | 540/1000 |
| Rear PTO Type | 540 |
| Rear PTO Type(optional) | 1000 |
Hydraulics Specifications of Oliver, 1655
| Type | Open center |
|---|---|
| Capacity | 14 gal [53.0 L] |
| Valves | 2 to 4 |
Three-Point Hitch of Oliver, 1655
| Rear Type | II/I |
|---|---|
| Control | Lower-link draft control |
Where it sits
With 77 hp[P] HP, the Oliver 1655 sits just above 1650 (73 HP) in Oliver's range. Its power puts it in the 76th percentile of 1960s models in our database (709 machines).
Frequently asked questions
How much horsepower does the Oliver 1655 have?
The Oliver 1655 delivers 77 hp[P] HP.
What years was the Oliver 1655 produced?
The Oliver 1655 was produced in 1969-1975.
What engine does the Oliver 1655 have?
The Oliver 1655 is powered by a Gasoline, 6-cylinder engine.
What transmission does the Oliver 1655 use?
The Oliver 1655 uses a Hydraul-Shift transmission.
Is the Oliver 1655 4WD?
The Oliver 1655 is available in 2WD/4WD.