Shibaura SE6340
Power
63 hp
Production
unknown
Engine
Diesel, 3-cylinder
Transmission
Synchromesh
Weight
6002 lbs [2722 kg]
Drive
4WD
Introduction
Production Information of Shibaura, SE6340
The production information of the tractor (SE6340) includes details about its manufacturing.
| Utility tractor |
| Built in Matsumoto, Japan |
| Manufacturer | Shibaura |
|---|
Dimension and Tires Information of Shibaura, SE6340
This section sums up the dimension and tires information of the tractor.
| Rear tread | 52.8 to 76.4 inches [134 to 194 cm] |
|---|---|
| Wheelbase | 82.7 inches [210 cm] |
| Ground clearance | 14.4 inches [36 cm] |
| Weight | 6002 lbs [2722 kg] |
| Length | 145.7 inches [370 cm] |
| Front tread | 52.8 to 68.5 inches [134 to 173 cm] |
| Width | 73.6 inches [186 cm] |
| Standard tires (ag) | Front: 9.50-24. Rear: 16.9-30 |
|---|
Engine Specifications of Shibaura, SE6340
Get the specifications for the engine and if different options are available.
| Shibaura LER1103 |
| Liquid-cooled |
| 3-cylinder |
| Diesel |
| Air cleaner | Dry element |
|---|---|
| Starter | Electric |
| Displacement | 208.8 ci [3.4 L] |
| Bore/Stroke | 4.331x4.724 inches [110 x 120 mm] |
| Power | 63 hp [47.0 kW] |
| Rated RPM | 2200 |
| Compression | 17:1 |
| Coolant capacity | 18 qts [17.0 L] |
| Oil capacity | 10.6 qts [10.0 L] |
| Starter volts | 12 |
Transmission Information of Shibaura, SE6340Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four gears, plus reverse, in four ranges. |
| Type | Synchromesh |
|---|---|
| Oil capacity | 47.6 qts [45.0 L] |
| Gears | 16 forward and 4 reverse |
| Clutch | 279mm dry disc |
Mechanical Specs of Shibaura, SE6340Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Two-post ROPS. |
| Mechanical wet disc brakes |
| Power steering |
| Final drives | Spur gear |
|---|
Power Information of Shibaura, SE6340Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| 800@2200 | |
| Engine RPM | 540@2200 |
| Clutch | Hydraulic wet disc |
| 1000@2200 | |
| Rear PTO Type | 540/800/1000 |
Hydraulics Specifications of Shibaura, SE6340
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Pump flow | 8.1 gpm [30.7 lpm] |
| Capacity | 6.6 gal [25.0 L] |
| Pressure | 2900 psi [200.0 bar] |
Three-Point Hitch of Shibaura, SE6340
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Control | Position and draft control |
Electrical System of Shibaura, SE6340
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery AH | 150 |
| Charging system | Alternator |
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Shibaura SE6340 have?
The Shibaura SE6340 delivers 63 HP.
What years was the Shibaura SE6340 produced?
The Shibaura SE6340 was produced in unknown.
What engine does the Shibaura SE6340 have?
The Shibaura SE6340 is powered by a Diesel, 3-cylinder engine.
What transmission does the Shibaura SE6340 use?
The Shibaura SE6340 uses a Synchromesh transmission.
How much does the Shibaura SE6340 weigh?
The Shibaura SE6340 weighs 6002 lbs [2722 kg].
Is the Shibaura SE6340 4WD?
The Shibaura SE6340 is available in 4WD.